10 Best
Ultra Grain Mills
-
Product Highlights- Material: good quality stainless steel material makes the machine durable, which could provide you a long service life;
- The grinder is suitable for powder processing;
- Voltage: 110v; motor speed: 36000r/min; capacity: 700g; power:2500w;
- High power and high grinding speed, let the machine more efficient than the traditional motor models;
- The machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper;
SHOWview product -
Product Highlights
- Stainless steel material & high speed grind - with the powerful 850w copper motor and the 3-layer stainless steel blades, various dry materials can be quickly smashed in 30 seconds - 3 minutes. *do not continuously operate the mill for more than 3 minutes. if you are not satisfied with grinding effect, you can sieve out coarse particles and grind it again for finer. (si...
- Easy to use & clean - this grinder is easy to control by a on/off button. press it to start grinding, and press again to stop the operation immediately. you can easily clean up the inside with a cleaning brush and then wipe the inside of jar with a dry cloth. (the grinding jar is not detachable, so don't wash it with water directly or rinse the motor base.)
- Safer design for relieved use - our electric grinder is equipped with a safety buckle device on the both sides of lid, that is if you open the lid during grinding, the machine will stop working immediately to avoid injury. and with upgraded overload protector, the grinder will also stop working to prevent the motor from burning-out when in overload/overheat state.
- Multipurpose dry grinder - our small electric grinder machine is applicable to pulverize all kinds of dried/dehydrated materials, including grains, spices, coffee beans, seasonings, rice, soybeans, corn, wheat, pepper, cumin, dried chili, animal feed and small herbs. (not suitable for wet, fresh, oily or sticky materials.)
- Specification - voltage: 110v, american plug; power: 850w; capacity: 150g/0.33lb; grinding degree: 50-300 mesh (vary from different materials); rotating speed: 28000r/min; control method: on/off button (without coarse/fine control). ***the 150g grinder is of relatively small size, if your grinding volume is more than 100g at a time, you can search asin: b08c9qrww8 on am...
SHOWview product -
-
Product Highlights
- Material: food grade tainless steel, good quality material makes the machine durable
- The grinder is suitable for dispensary, medicine processing factory and powder processing
- Voltage: 110v; motor speed: 28000r/min; capacity: 0.77lbs(350g); power: 1500w
- High power & grinding speed, makes the machine more efficient than the traditional motor models
- The grinder machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, medicine (such as ganoderma, licorice, tianqi, pearl etc)
SHOWview product -
-
Product Highlights
- ✔ applicable scene: this machine is suitable in the clinic to the drug treatment plant and the treatment of powder at the research institute, laboratory analysis and family food instead of the traditional version: it is 50 times more resistant than conventional engine work efficiency.
- ✔ determined big: chamber cover in the humanized design, comfortable handle, quick-release fastener, stamp, slip and robust
- ✔ wide application: for cereals hide gelatin, tragacanth, e-gelling, the incense, the root of the membrane-like tragacanth, pseudo-ginseng, hippocampus, chinese dodder the seeds of the shiny shiny ganoderma, the peral and ect. this electric machine bean grinder suitable for the clinic medication treatment plant and the treatment of powder, clinics, hospitals, pharmacies...
- ✔ 430 material stainless steel: the design with three stainless steel blades, quickly in powder to make the body curved in the grinding process, more uniform and delicate.
- ✔ high quality: the grain mill with an ultra-fast end motor and high quality bearings used, the structure is accurate and low noise. movement made of copper wire, with low resistance, high power, energy saving, protection from air overload, more cooling systems on the floor, avoid high engine temperatures and affect its use ..
SHOWview product -
-
Product Highlights
- [safety design] upgraded open-cover-stop type when open the cover, the machine will automatically stop, making the operation safer and more compliance with ergonomics.with overload protection function, when overwork is turned on, it automatically turns off and restarts easily. there is buckle design, there is no powder leakage during milling.
- [superfine power mill] except extremely hard material takes 2-in to grind, normal grains only needs 30s to be ground into 70 to 300 mesh superfine power. ☆grinding inappropriate materials or overloading can cause the machine to overheat and even have a burning smell. and burning smell is normal at a new machine; if it still exists for a period of time, please contact us...
- [use tips] 1.this grain grinder can only be turned on after the lid is fully buckled. there is two induction switches in the buckles on the both sides. 2.the materials ready for grinding must be dry enough. 3.rest the machine for 5-10 minutes after every 5 minutes operation. 4.do not put the material over 2/3 of grinding bin. ☆ we will provide you with the best products...
- [safety design] upgraded open-cover-stop type when open the cover, the machine will automatically stop, making the operation safer and more compliance with ergonomics.with overload protection function, when overwork is turned on, it automatically turns off and restarts easily. there is buckle design, there is no powder leakage during milling.
- [high power & high speed] power: 1500w; acity: 300g; speed:28000r/min; interval time: 5-10 min; working time: 0-5 min ( it takes 5-10 minutes to rest after every 3 minutes of work.)☆the working principle is to puerize the material into powder through the high-speed rotation of the blades. the whole process is carried out in the closed grinding bin, which will generate h...
- [wide-range usage] the grinder can deal with various dried materials, including ①grains (soy, corn, barley, rice, wheat, oats, rye, peas, mung beans, coffee beans), ②spices (star anise, fennel, pepper, cinnamon, rosemary) ③herbs (ginseng, astragalus, medlar gelatin, gastrodia, shijie, ganoderma lucidum) ④ materials (sesame, peanuts, walnuts). the material will not be wa...
SHOWview product -
Product Highlights
- The stainless steel body design makes the grinder durable, strong, rust-proof, anti-aging, and high-strength for long-term use.
- Easy to clean after every use. it is important to make sure the bowl is clean and dry before each use.
- Don't wash the grinding cup with water directly or rinse the motor base. it's not waterproof. please use a brush or dry cloth for cleaning
- Made of 304 stainless steel +abs material, resistant, healthy and good mechanical properties.
- Recommend rest about 60 seconds after using for every 30-45 seconds for better motor
SHOWview product -
Product Highlights
- Mill powder machine is buckle structure, good sealing, high security,high power and high grinding speed, let the machine more efficient than the traditional motor models;
- Do not clean the machine with water, you can clean the machine by cloth or brush.during using, do not open the upper cover or put your hands.
- The grain grinder made of food-grade stainless steel, tough and durable,metal motor blade: wear resistance, ensure the stability and safety of the motor for a long time
- Electric grain grinder motor speed:36000(r/min).capacity: 700g,motor power:2500w,operation time：5mins.interval time：10mins
- The machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, coffee, spice, etc.
SHOWview product
Coupon copied
