10 Best
Ultra Electric Grain Mills
-
Product Highlights- Stainless steel material & high speed grind - with the powerful 1500w copper motor and the 3-layer stainless steel blades, various dry materials can be quickly smashed in 30 seconds - 3 minutes. *if you are not satisfied with grinding effect, you can sieve out coarse particles and grind it again for finer.
- Easy to use & clean - this grinder is easy to control by a 0-5 min timer switch. turn the timer switch to the grinding time you want and the grinder will start grinding automatically, and you can turn it back to zero to stop the operation immediately. you can easily clean up the inside with a cleaning brush and then wipe the inside of jar with a dry cloth. (the grinding...
- Safer design for relieved use - our electric grinder is equipped with a safety buckle device on the both sides of lid, that is if you open the lid during grinding, the machine will stop working immediately to avoid injury. and with upgraded overload protector, the grinder will also stop working to prevent the motor from burning-out when in overload/overheat state.
- Multipurpose dry grinder - our small electric grinder machine is applicable to pulverize all kinds of dried/dehydrated materials, including grains, spices, coffee beans, seasonings, rice, soybeans, corn, wheat, pepper, cumin, dried chili, animal feed and small herbs. (not suitable for wet, fresh, oily or sticky materials.)
- Specification - voltage: 110v, american plug; power: 2500w; capacity: 500g/1.1lb; grinding degree: 50-300 mesh (vary from different materials); rotating speed: 36000r/min; control method: timer switch (without coarse/fine control; do not continuously operate the mill for more than 3 minutes.)
SHOWview product -
Product Highlights
- Hand-held in small size - power: 1500w; capacity: 300g; speed: 28000rpm; grinding fineness: 70-300 mesh; (except extremely hard material takes 2-3min to grind, normal grains only needs 30s to be ground finely, so don't use it for too long. it takes 5-10 minutes to rest after every 3 minutes of work.) note: the material recommended to grind one time must cover the long b...
- Overload protector & 0-5 min timer switch - when grain grinder is in an overloaded/overheat state, the overloaded protector will work automatically to stop the operation. it's easy to solve by replacing the carbon brushes on the both sides and then pressing the overload protector again, then the grinder could work well.
- Warranty & professional service - all cgoldenwall grain grinders enjoy 1 year warranty and professional after-sales service. ***materials with high oil content like peanuts, walnuts are not suggested to be ground as they may stick to the blades when grinding.
- Grain mill with upgraded safety lid - open-cover-stop type grain grinder will automatically stop operation when its lid is opened, largely enhancing security and protecting the user from injury. there is two induction switches in the buckles on the both sides, which make the machine get started only when the lid is closed completely. so if the grinder cannot turn on the...
- Only dried materials applicable - the grinder can deal with various dried materials, including ①grains (soy, corn, barley, rice, wheat, oats, rye, peas, mung beans, coffee beans), ②spices (star anise, fennel, pepper, cinnamon, rosemary) ③herbs (ginseng, astragalus, medlar gelatin, gastrodia, shijie, ganoderma lucidum) when using machine to grind panax notoginseng, chine...
- Important attention - 1. our grinder can only be turned on after the lid is fully buckled. please follow the steps of how to close lid on manual, video or listing image 5. 2. the materials ready for grinding must be dry enough. 3. rest the machine for 5-10 minutes after every 3 minutes operation. we will provide you with the best products and services. if there is anyth...
SHOWview product -
Product Highlights
- Material: food grade tainless steel, good quality material makes the machine durable
- The grinder is suitable for dispensary, medicine processing factory and powder processing
- Voltage: 110v; motor speed: 28000r/min; capacity: 0.77lbs(350g); power: 1500w
- High power & grinding speed, makes the machine more efficient than the traditional motor models
- The grinder machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, medicine (such as ganoderma, licorice, tianqi, pearl etc)
SHOWview product -
-
-
Product Highlights
- Mill powder machine is buckle structure, good sealing, high security,high power and high grinding speed, let the machine more efficient than the traditional motor models;
- Do not clean the machine with water, you can clean the machine by cloth or brush.during using, do not open the upper cover or put your hands.
- The grain grinder made of food-grade stainless steel, tough and durable,metal motor blade: wear resistance, ensure the stability and safety of the motor for a long time
- Electric grain grinder motor speed:36000(r/min).capacity: 700g,motor power:2500w,operation time：5mins.interval time：10mins
- The machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, coffee, spice, etc.
SHOWview product -
-
Product Highlights
- Material: good quality stainless steel material makes the machine durable, which could provide you a long service life;
- The grinder is suitable for powder processing;
- Voltage: 110v; motor speed: 36000r/min; capacity: 700g; power:2500w;
- High power and high grinding speed, let the machine more efficient than the traditional motor models;
- The machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper;
SHOWview product -
Product Highlights
- [safety protection function] upgraded open-cover-stop type when open the cover, the machine will automatically stop, making the operation safer and more compliance with ergonomics.with overload protection function, when overwork is turned on, it automatically turns off and restarts easily. there is buckle design, there is no leakage during milling.
- [high power & high speed] model: hc-700y; acity: 700g power: 2800w; speed: 28000r/min. slot machine: 13.5cm*13.5*11.5; ☆the working principle is to puerize the material into powdery through the high-speed rotation of the blades. the whole process is carried out in the closed grinding bin, which will generate heat and cause the machine to heat up. so it is normal for the...
- [use tips] 1.it can only be turned on after the lid is fully buckled.there is two induction switches in the buckles on the both sides. 2.materials ready for grinding must be dry enough. 3.rest the machine for 5-10 minutes after every 5 minutes operation. 4. do not put the material over 2/3 of grinding bin. 5.with timer function, you can adjust the fineness of crushing b...
- [safety protection function] upgraded open-cover-stop type when open the cover, the machine will automatically stop, making the operation safer and more compliance with ergonomics.with overload protection function, when overwork is turned on, it automatically turns off and restarts easily. there is buckle design, there is no leakage during milling.
- [wide-range usage] the grinder can deal with various dried materials, including ①grains (soy, corn, barley, rice, wheat, oats, rye, peas, mung beans, coffee beans), ②spices (star anise, fennel, pepper, cinnamon, rosemary) ③herbs (ginseng, astragalus, medlar gelatin, gastrodia, shijie, ganoderma lucidum) ④ materials (sesame, peanuts, walnuts). the material will not be wa...
- [fine grinding] triples blade: grinding blade, rotary blade, and removal blade, can be puerized easily. crushing fineness reaches from 30 to 300 mesh. ☆grinding inappropriate materials or overloading can cause the machine to overheat and even have a burning smell. and burning smell is normal at a new machine; if it still exists for a period of time, please contact us an...
SHOWview product -
Product Highlights
- The stainless steel body design makes the grinder durable, strong, rust-proof, anti-aging, and high-strength for long-term use.
- Easy to clean after every use. it is important to make sure the bowl is clean and dry before each use.
- Don't wash the grinding cup with water directly or rinse the motor base. it's not waterproof. please use a brush or dry cloth for cleaning
- Made of 304 stainless steel +abs material, resistant, healthy and good mechanical properties.
- Recommend rest about 60 seconds after using for every 30-45 seconds for better motor
SHOWview product
Coupon copied
