10 Best
Z Wave Sensors
-
-
Product Highlights
- Extra small: perfect for discreet mounting with a slim profile to fit most frames and surfaces.
- Z-wave compatibility: supported by open z-wave systems only, including home assistant, homeseer, hubitat, vera, and ezlo hubs. compatible with smartthings and ring alarm (no access to advanced settings). not supported by alarm panels like vivint, qolsys, 2gig, adt, or others.
- Fast and reliable: get notified on your z-wave hub's app or via text when a door or window is opened for easy diy security monitoring. use on safety gates, cabinet doors, patio doors, and more. z-wave hub required, sold separately (check below for compatibility).
- Outdoor case available: the sensor is coated with protective rubber oil against corrosion and water leak damage. a splash is fine but if you want to install it outdoors, you'll need a dedicated waterproof case (sold separately, ask zooz about it).
- Smart security: 700 series z-wave chip with longer range, better battery life, and the highest level of s2 security with smartstart for fully encrypted communication. covered by a 5-year limited warranty and backed by lifetime tech support 7 days a week.
SHOWview product -
Product Highlights
- Flexible mount: use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. power the sensor with batteries (included) or a micro usb cable (sold separately). always use a single power source only. works as a z-wave repeater when included on usb power.
- Minimal design: simple and modern look to compliment any interior. this sensor is small enough for discreet monitoring of your home, office, or warehouse space.
- 4 smart sensors: get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. use this device as the trigger to lighting automations, security alerts, or climate control. it's as versatile and as quick to report as can be. compatible z-wave hub required (sold separately).
- Z-wave compatibility: most basic z-wave systems aren't advanced enough to display multisensors correctly. the zse11 q sensor is supported by: smartthings (with a custom handler, instructions included with the product), hubitat, home assistant, indigo, vera, and homeseer. please do not buy this device if your hub isn't listed here, it will not be recognized by your system.
- More security: includes s2 authenticated z-wave security and smartstart for the safest communication possible. back by a 1-year manufacturer warranty and lifetime tech support.
SHOWview product -
-
Product Highlights
- Supports z-wave network security modes: s0 with aes-128 encryption and s2 authenticated with prng-based encryption
- Allows for connecting: 6 ds18b20 sensors, 1 dht sensor, 2 2-wire analog sensors, 2 3-wire analog sensor, 2 binary sensors
- Compatible with any certified z-wave or z-wave plus controller
- Works as a z-wave signal repeater
- Built-in temperature sensor
SHOWview product -
Product Highlights
- 3-way compatible: unlike many other smart relays, you can use this device to automate 3-way set-ups as well. even if you don't have neutral available at any of the switch boxes, you can always install this relay at the light fixture where you'll have access to power and neutral. always follow the wiring diagrams carefully and make any programming changes if needed when ...
- Smart bulb mode and more: bring back the switch function to your old switches even when using smart bulbs. the smart bulb mode allows you to control smart bulbs via z-wave without cutting power to them when off. enjoy the 700 series z-wave with powerful features like smartstart and s2 authenticated security.
- Smart relay for on/off control: install this relay to add z-wave to the existing wall switch and keep your favorite switch style and color. the relay output is dry contact for your unique applications outside of lighting but note the input (switch) requires 120 v which makes it perfect for 120 v signal monitoring on sump pumps or motion lights. for a dry contact input d...
- Easy installation: pigtail wires for convenient connections. connect to mechanical on/off or momentary switches only (no dimmers or electronic / smart switches). the relay is small enough to fit in the most crowded box, just 1.5'' x 1.4'' and 0.7'' deep. neutral wire required (check before buying). the device is etl certified and conforms with north american safety stan...
- Hub compatibility: this is an advanced z-wave device and it requires an updated z-wave hub to display correctly. it was tested to work well with hubitat, home assistant (z-wave js), homeseer and is compatible with smartthings. this product is backed by us based support from zooz, 7 days a week and a 5-year once registered.
SHOWview product -
Product Highlights
- Selectable motion control – personalize the switch with three motion-detection options – occupancy, vacancy and manual. occupancy mode turns lights on/off automatically, while lights are turned on manually and off automatically in the vacancy setting. to deactivate the motion sensor, select manual operation. with five time-out duration options ranging from five seconds ...
- Full-home coverage – z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network. the switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your z-wave signal from your hub or other devices to extend your range by up to 150ft. extended signal range increases your home aut...
- Voice control – alexa & google assistant compatible (requires a z-wave certified hub). works with the following z-wave certified hubs: smartthings, ring alarm, wink, adt pulse, adt command, trane, vivint, nexia, honeywell, home seer, harmony home hub extender, vera and more.
- 3-way ready – the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. up to four add-on switches can be connected to the same device.voltage:120 volt
- Easy installation – requires indoor in-wall installation with hardwired connections. neutral wire required. includes white and light almond cover buttons (wall plate not included). works with all led, cfl, incandescent and halogen bulbs as well as other devices. operating temperature range 32-104 degrees fahrenheit.
SHOWview product -
Product Highlights
- And more: all data is transmitted to your system using encrypted signals, protected by tamper alerts. with the multifunctional led, you can access temperature readings and test your z-wave signal straight from the device. plus you get over 20 advanced settings to customize the sensor and make it your own!
- Ultra small: install the smallest 4-in-1 sensor anywhere without ruining the view. it attaches to any flat surface with a single screw or a piece of adhesive (both included). hide it well or show it off using the flexible mounting bracket and customizable led indicator.
- All you need: dependable motion alerts, quick light reports, real-time temperature readings, and vibration notifications sent straight to your z-wave hub. use them to automatically trigger smart lighting, security sirens, or your connected thermostat.
- Hub required: this sensor will work beautifully with any open z-wave system like smart things, vera, nexia, home center lite, or home seer. it is not supported by wink or alarm panels ( pulse, alarm, and others). this is the z-wave version, not for apple home kit.
- You're covered: this is a z-wave plus certified and ul listed device created and built in europe from quality materials. support portal and documentation are available on the fibaro website so if you ever need help, just ask!
SHOWview product -
Product Highlights
- Add it to your z-wave hub and get alerted immediately on your smart phone, tablet, or email when there is a leak. trigger certain lights, activate specific scenes or even sirens to activate if there is a threat.
- Built in temperature sensor alerts through your smart hub's app and visually/ audibly at sensor if there is a sudden rise or fall in temperature.
- The ultimate z-wave water leak sensor/detector, with temperature and tilt sensor. hub required, sold separately.
- Three 24k plated gold telescoping feat always make sure its making contact even on uneven surfaces and never corrodes. built for longevity. .
- Z-wave certified sensor: certification id zc08-14070006 / frequency region: u. s. /canada/mexico, z-wave library version: 4. 55. 00. does not work with apple home kit.
SHOWview product -
Product Highlights
- 【flood detection】whenever the aqara water leak sensor detects water, it can send an alert to your phone and activate the local alarm on the aqara hub to prevent leaks and flooding.
- 【wireless & sensitive】no wiring or screws are required. the ultra mini design allows you to put it anywhere that dripping and leaking could happen. our water leak sensor is designed with sensitive leak probes which the threshold of the water level is 0.5mm.
- ✽【notes】an aqara hub is required and sold separately. requires a secured 2. 4 gigahertz wifi network connection. the aqara m2 or m1s hub can connect up to 128 devices(*use of a repeater such as the aqara smart plug or aqara smart wall switch(with neutral) is required).
- 【home automation】controls and triggers aqara connected devices when excess water is detected.
- 【industry-leading quality】durable ip67 water-proof housing with rust-proof exterior coating. in addition, if you have any questions, please feel free to contact us.
SHOWview product
Coupon copied
