10 Best
Z Wave Door Sensors
-
Product Highlights- Extra small: perfect for discreet mounting with a slim profile to fit most frames and surfaces.
- Z-wave compatibility: supported by open z-wave systems only, including home assistant, homeseer, hubitat, vera, and ezlo hubs. compatible with smartthings and ring alarm (no access to advanced settings). not supported by alarm panels like vivint, qolsys, 2gig, adt, or others.
- Fast and reliable: get notified on your z-wave hub's app or via text when a door or window is opened for easy diy security monitoring. use on safety gates, cabinet doors, patio doors, and more. z-wave hub required, sold separately (check below for compatibility).
- Outdoor case available: the sensor is coated with protective rubber oil against corrosion and water leak damage. a splash is fine but if you want to install it outdoors, you'll need a dedicated waterproof case (sold separately, ask zooz about it).
- Smart security: 700 series z-wave chip with longer range, better battery life, and the highest level of s2 security with smartstart for fully encrypted communication. covered by a 5-year limited warranty and backed by lifetime tech support 7 days a week.
SHOWview product -
Product Highlights
- 2 smart inputs: monitor 12-24 v or dry contact inputs separately from the dry contact outputs. connect analog binary sensors to receive status updates in your z-wave hub from a connected door sensor, water sensor, hvac system, or alarm panel. use the inputs to trigger the outputs automatically.
- Quick installation: power it with a 12-24 v ac/dc power source or a standard usb c cable (included) and a power supply (sold separately). wall-mount ready. jumper wires not included. do not power with 110 v!
- 2 smart outputs: control 2 dry contact relays independently with one z-wave device. choose from normally closed (10 a) and normally open (20 a) relays to automate almost any electrical device. connect an optional wall switch for physical on/off control or use your z-wave hub (required, sold separately) for wireless control. your smart speaker is not a z-wave hub. this p...
- Automate anything: add z-wave connectivity to up / down dc motors in screens, motorized blinds, or awnings. perfect to automate your garage door opener (use a single zen17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 v device up to 20 a.
- New 700 z-wave: enjoy better signal coverage and a stronger z-wave repeater for your mesh network with the latest 700 series chip. it comes with s2 authenticated security and smartstart for easy pairing. remembers and restores on/off status after power failure. built-in auto-on and auto-off timer available if your hub supports advanced settings. the device is etl certif...
SHOWview product -
-
Product Highlights
- And more: any report that's sent from the sensor to your network uses encrypted signal. the device features tamper protection for extra security. and as a bonus, fibaro put a temperature sensor inside this smart device so you can make sure every room is at your comfort level.
- 5-minute set-up: just stick the sensor and magnet to any door or window frame and add the device to your hub in 2 easy steps. its miniature design allows the sensor to be mounted wherever you need open/close monitoring. it's so efficient, it will last 2 years on a single battery (included).
- Monitor any door: get fast text or email alerts about a window or door left open whenever you're not around (z-wave system needed, sold separately). track any open / close activity on any door you can think of, including safety gates, medicine cabinets, safes, and closets. then use these reports to create the perfect automations for your daily routine!
- Hub required: this sensor will work great with any open z-wave system like smartthings, vera, nexia, home center lite, or homeseer. it is not supported by wink or alarm panels (adt pulse, vivint, alarm.com, and others). this is the z-wave version, not for apple home kit.
- You're covered: this is a z-wave plus certified and ul listed device created and built in europe from quality materials. support portal and documentation are available on the fibaro website so if you ever need help, just ask!
SHOWview product -
Product Highlights
- Powerful and robust security: the z wave plus v2 series 700 standard provides the highest level of security of any z wave standard. it supports network key, aes 128 bit encryption, ecdh key agreement protocol, security 2 (s2), and smartstart, which renders man in the middle hacking virtually impossible.
- Small and compact: measuring only 2.2" x 1.0" x 0.2" (56 x 26 x 6 mm), this is one of the smallest and most compact door/window sensors on the market.
- Easy setup: setup is as simple as scanning the qr code on the sensor with your smartphone, then following the step by step instructions.
- Long battery life: the z wave plus series 700 standard delivers up to 50% longer battery life than previous z wave standards, allowing this sensor's battery to last for up to 10 years.
- Longer wireless range: the z wave plus series 700 standard provides a wireless hop mode range of up to 800 meters (2,624 feet), more than 200 meters greater than the series 500 standard.
SHOWview product -
Product Highlights
- 3 year+ battery life powered by 1 x 1/2 aa battery. optimised to use up to 66% less battery power to communicate than previous generations.
- Zwave window sensor 7 is powered by the speed enhancements that come from z-wave plus and z-wave s2 enabling it to wireless communicate 50% faster and up to 67% further in real-world use.
- Smallest 3-in-1 zwave door sensor window sensor. multisensors include magnetic contact, dry contact relay, and a tilt sensor. the tilt detection must be in operation with the magnet sensor in its description.40% smaller than previous generation at only 2.8”x0.75”x0.7” (main body)
- With a smartstart enabled gateway, you can connect it to your zwave hub by simply scanning its qr code. from there, stick it to your door and door / window sensor 7 is ready to power your home and protect it.
- Compatible with samsung smartthings, vera, zipabox, homeseer, ring, open z-wave, nexia, domoticz and more., frequency: 908.40 mhz, 916.00 mhz, id: zc12-20080085
SHOWview product -
Product Highlights
- [native matter support over thread] support matter, the p2 supports access to apple home, google home, amazon alexa and samsung smartthings. doesn’t support aqara home app, 2-1 matter controller or thread border router. but it will support aqara home app and add more features in the future through the matter-compatible aqara border router. meanwhile, as a sensor based o...
- [local home automations] you can integrate the door and window sensor p2 with your smart home ecosystem to enable advanced automations like adjusting thermostat settings or activating security cameras when a door or window is opened. moreover, the automations are executed without the cloud, which can protect the user’s privacy and will keep working even if there is no i...
- [matter controller & thread border router 2-in-1 required] a matter controller & thread border router 2-in-1 is required to enjoy seamless integration with a matter-enabled smart home ecosystem. currently, the following hubs are tested. apple: apple tv 4k (3rd gen, 128 gb), apple tv 4k (2nd gen), homepod (2nd gen), homepod mini | samsung: smartthings hub v3, aeotec hub ...
- [open/closed status monitoring] with a built-in high-precision hall sensor, the aqara door & window sensor p2 can detect the opening and closing status of doors, windows, and drawers precisely. once the sensor is triggered, it will send real-time alert notifications via automation to your smartphone whether you're at home or away, ensuring you're always aware of any pot...
- [voice alerts and status notifications] supports apple siri, alexa, and google assistant. with these voice assistants, you can receive alerts about events such as door entries, or ask whether a door is open, allowing you to effortlessly monitor your home. additionally, please ensure that the sensor has to be within 393 inch of the hub, and the surface where you plan to ...
SHOWview product -
Product Highlights
- 【unauthorized entry detection】whenever the door/window opens unexpectedly, the aqara door and window sensor will send an alert notification to your phone and activate the local alarm on the aqara hub.【home automation】the aqara door and window sensor can control other aqara connected devices as the status of the door or window changes.
- 【22mm wide gap allowed】the aqara door and window sensor works with most types of doors, windows, and other fixtures with similar mechanism, such as drawers, cabinets, and more.
- ✽【notes】an aqara hub is required and sold separately. requires a secured 2. 4 gigahertz wifi network connection. the aqara m2 or m1s hub can connect up to 128 devices(*use of a repeater such as the aqara smart plug or aqara smart wall switch(with neutral) is required).
- 【home automation】the aqara door and window sensor can control other aqara connected devices as the status of the door or window changes.
- 【voice control】compatible with apple home kit, alexa for a hands-free experience. in addition, if you have any questions, please feel free to contact us.
SHOWview product -
-
Product Highlights
- ✅10 times longer range: powered by lora techonology, yolink presents the longest receving range (1/4 mile) in the market. our long range enable its use in hard-to-reach areas such as basement, guest suite, storage shed, greenhouse, etc.
- ✅easy setup: just scan the code and ready to use
- ✅instant notification: automatically receive mobile notifications when doors or windows are opened or closed; get a reminder when doors are opened for a specific time; check the history of all activities in the app
- ✅5 times longer battery life: 5 years battery life compare to 1 year of other top brands.
- ✅yolink hub required: search b07tqlkqlj for hub or try our smart home starter kit b07v246gcx.
SHOWview product
Coupon copied
