10 Best
Charger For Drones
-
Product Highlights- Wide applications: urgenex lipo battery usb charger cables are compatible with axial scx24 scx10 rc car, truck, fpv drone quadcopter and boat. please note that we don't recommend to use them to a battery below 500mah.
- How to use: 1. charger powered on and no load, then the red light is on; 2. battery charing in progress, then the red light is solid, the green light is flashing; 3. battery is fully charged, the green light is solid. please unplug the batteries after fully charged.
- High efficiency charging: designed for 2s 7.4v lithium polymer battery and li-ion battery. input: dc 5v 2a; out put: 7.4v 1a*2(independent channels). connector: usb to xh-3pin plug; length: 2.05ft/62.5cm.
- Ultra safe: our high technology enables intelligent ic protection. built-in overload, over-voltage, overcharge ic protection circuit. please make sure that the voltage(7.4v) match before use.
- What you get&warranty: 1pcs 1 to 2 7.4v usb lipo battery cables. urgenex always insists customer first and offers one year warranty.
SHOWview product -
Product Highlights
- Black abs wall charger, supports pd 30w fast-charging; input 100-240 volts, 0.8 amps, 50/60 hz; dual ports output, usb port output 5 volts / 3 amps, 9 volts / 2 amps, 12 volts / 1.5 amps; usb-c port output 5 volts / 3 amps, 9 volts / 3 amps, 12 volts / 2.5 amps, 15 volts / 2 amps and 20 volts / 1.5 amps; built in smart ic chip-set to prevent short circuit, with over vol...
- Dual ports usb and type-c charging set supports super fast-charging for 2 devices simultaneously - saving time
- Compatible with dji mini 2, mini 2 se, mini 3, mini 3 pro, air 2s, avata, mavic 3 drones, fpv remote controller(rc) motion controller and battery accessories; also compatible with dji stabilizers osmo mobile om6, om5, om4, om se, rs2, rs3, rs 3 pro and sports cameras osmo action 3, action 3 and pocket 2
- Usb-c to usb-c cable, black, made up of nylon, braided, durable, steady and unbreakable; supports quick charging; 6.6 feet / 2 meters long
- Supports charge together by wall power interface; also supports charge separately by gamecapture / obs / xsplit / tipeee-stream / twitch / mixer and facebook live content creation devices, conveniently for vloggers making streaming and youtube tiktok video
SHOWview product -
Product Highlights
- [circuit protection] the battery charging cable comes with an ic protection device with overvoltage, overload and short-circuit protection for all-round protection of the power supply and electrical equipment.
- [plug & play] the usb connector can be used with any usb socket charger adapter, so feel free to do other work during charging.
- [efficient charging] lipo battery usb charging cable plug. specially designed for charging 7.4v lipo batteries, input: dc 5v, output current: 800ma. 2-3 hours to full charge (depending on battery capacity).
- [led indicator] there is an indicator light for charging the lipo battery normally as long as the usb is connected to the device. the red and green lights flash alternately when charging and the green light is solid when fully charged. alarm: red light flash quickly.
- [wide application] this lipo battery usb charger cable is compatible with 7.4v 2s lipo batteries or battery less than 1500mah, which is widely used for devices such as rc cars, trucks, boats, drones, aeroplanes, quadcopters, helicopters, gliders and other devices. (please check the length and plug type before order).
SHOWview product -
Product Highlights
- 【input and ouput】 ac input voltage:100-240v. output power：20w, charging current: 1a/2a. charging current can be selected with a switch on the side of the charger. 1 amp is recommended for battery with a capacity of less than 2200 ma, and 2 amp are recommended for battery with a capacity higher than 2200 ma.
- 【airsoft charger with two-color indicator】steady red light indicates that charging is in progress, steady green light indicates that charging is completed, red and green flash alternately indicates that the battery is not connected.
- 【intelligent nimh/nicd battery charger】the charger is professionally designed for 2-8s(2.4-9.6v) nimh/nicd battery used in airsoft gun, drone, rc car,rc boat, and other rc toys. it's compact and portable, and has an elegant design. with overcharge protection, overcurrent protection,overvoltage protection,etc.
- 【easy to use】the battery connector of the charger is a standard tamiya, and it also comes with a standard tamiya to mini tamiya charging cable, and a standard tamiya to alligator clip charging cable, which can meet your various needs. you can charge your nimh/nicd battery easily, just need to connect the power and connect your battery to the charger.
- 【package contents】1x nimh/nicd charger, 1x ac cord, 1x standard to mini tamiya charging cable, 1x standard tamiya to alligator clip charging cable, 1x english manual. note:the charger is only suitable for nimh/nicd batteries, please do not charge incompatible batteries. it is recommended that someone be nearby while charging the battery.
SHOWview product -
Product Highlights
- Usage : this cable fit for charging the rc drones and quadcopters on the usb port. battery range : li-thium polymer, li-thium cylindrical, li-thium digital, li-thium remote controller.
- Easy to use : plug and play, no complicated operations.
- 2pcs 3.7v li-po battery usb charging cable with res female jst plug for rc drones rc quadcopter battery. compatible with syma s39, s32, s032, s032g, s029g, s027g and many more.
- Input voltage : dc 5v, input current : 1-2a, output voltage : dc 3.7v, output current : 500mah
- Rc battery usb charger cable length is about 63cm, easy operation, battery can be charged anytime.
SHOWview product -
Product Highlights
- ※input parameters: dc 5v 1a, output parameters: dc 3.7v 500mah; the plug type is a 2-pin balanced charging plug; rechargeable 3.7v polymer lithium battery, cylindrical lithium battery, digital lithium battery, remote control aircraft lithium battery.
- ※function description: the charging line is equipped with an intelligent charging management ic, which can accurately charge 3.7v batteries, automatically stop when fully charged, and will not overcharge.
- ※3.7v usb charging cable compatibility: mjx syma holly stone sky viper rc drones x56w x400 x400w x300c x400c x500 x800 hj818h j819s hs110 hs200 s670 v950hd s1750 v2450 udi u817 u818a for v959 v222 v929 for s032 remote control drone 3.7v lipo battery
- ※charging indicator: when the charging cable is connected to the power supply and the battery is connected for charging, the red charging indicator light is always on, and the fully charged red light is off.
- ※the cut-off voltage at full charge is 4.15v-4.23v, making reasonable use of the characteristics of lithium batteries to better extend their service life.
SHOWview product -
Product Highlights
- ✅𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆: 30w fast charging specially designed for all dji devices and accessories with type-c charging port; such as dji mini 4 pro, mini 3 pro,mini 3, mini 2, mini 2 se, air 3,air 2s, fpv, avata, mavic 3 drones, rc 2, rc, rc-n2, rc-n1, motions 2, motion, fpv remote controller, two-way charging hub and battery accessories; also compatible with dji goggles integra...
- ⚡𝟲𝟬𝗪 𝗨𝗦𝗕 𝗖 𝘁𝗼 𝗨𝗦𝗕 𝗖 𝗖𝗮𝗯𝗹𝗲: this 6.6ft c to c type fast charging cable support power delivery (pd 3.0) fast charging protocol., 3a maximum output of 60w allows for high-speed charging. including a 56kω resistor protect your devices from damage. comply with usb 2.0 standard, supports data transmission speed up to 480mbps(60m/s). premium nylon braided cable adds additional...
- ⚡𝗣𝗼𝘄𝗲𝗿𝗳𝘂𝗹 𝟯𝟬𝗪 𝗖𝗵𝗮𝗿𝗴𝗶𝗻𝗴: this 30w fast charging is designed to be compatible with dji devices. with a maximum output of 30w, enjoy lightning-fast charging speeds for your dji devices
- ✅𝗚𝗮𝗡 𝗜𝗜𝗜 𝗕𝗮𝘀𝗲𝗱 𝗖𝗵𝗮𝗿𝗴𝗲𝗿: utilizes the industry-leading gan chip to better power and performance. automatic protection against overvoltage, overcharging, overheating, short circuit, this smart chip can match the maximum charging speed required by the dji device. pd 3.0 (usb-c port): 5v ⎓ 3a / 9v ⎓ 3a / 15v ⎓ 2a / 20v ⎓ 1.5a (up to 30w)
- 🧡𝗦𝗘𝗥𝗩𝗜𝗖𝗘 & 𝗣𝗔𝗖𝗞𝗔𝗚𝗘 𝗜𝗡𝗖𝗟𝗨𝗗𝗘𝗦: 1 years warranty, if you are not completely satisfied with the charger within 30 days of purchase, we will happily refund you for any reason. a 30w charger, a 6.6ft c to c charging cable
SHOWview product -
Product Highlights
- In order to connect dji mavic mini se/mavic 2 / dji mavic pro / air / mavic mini and spark remote controller, you need an extra converting cable as there is no usb port on drone remote controller.
- New and good quality ,portable and durable. this cable only forcharging.
- Charging cable for dji mavic mini se/mavic 2 / dji mavic pro / air / mavic mini and dji spark drone remote controller.
- Material: flexible nylon wire, with good elasticity and strong stability.
- Cable length:80cm/31.5inch
SHOWview product -
Product Highlights
- 2. the package includes 6pcs lithium battery and 1pcs 6-in-1 balance charger, which can charge 6 batteries at the same time, and get fully charged batteries faster, making flying fun uninterrupted
- 4. a single battery weighs 6g, which is light and reduces the burden of flying; the size is 28x17x8mm, which is compact and easy to carry.
- 1.battery compatible with e010 e010c e011 e011c e013 goolrc t36 ninhui nh010 f36 h36 hs210 sanrock gd65a atoyx at-66 quadcopter
- 3. brand new upgraded battery accessories, 100% brand new and high quality, longer battery life than before, more durable
- 5.note: please confirm whether the drone model matches the battery before purchasing, so as not to bring you an unpleasant shopping experience.
SHOWview product
Coupon copied
