10 Best
3d Printer Boards
-
Product Highlights- High quality mos tube, high imput impedance, low noise below 50 decibels, good thermal stability.
- Support auto leveling, filament sensor and resume printing after a power failure.
- This board is also compatible with sovol sv06 and sv06 plus, only need to flash firmware at first.
- Sovol new self-developed upgraded motherboard is equiped with 32-bit mcu and 24v power input, which makes the caculation speed faster, operation control system more sensitive, printing accuracy higher and improve stability.
- All-round heat dissipation design, each tmc2209 chip have heat sinks, let the cooling system easily cope with more situations.
- Perfect fit for creality ender 3, ender 3 pro, ender 3 v2, ender 3 neo 3d printer. the firmware presinsalled for ender 3, plug and play. if your printer is other models except ender 3 please flash firmware at first. p.s. please come to creality official website to download firmware. select the firmware with the 'gd' character. do not flash other versions such as the fir...
SHOWview product -
Product Highlights
- Technical parameters: for esp32 wroom 32u(8m flash) motherboard, built in for esp32 dowd v3 chip, for xtensa dual wire, 32 bit lx6 microprocessor, support clock frequency up to 240 mhz, 8192kbytes flash, 520kbytes ram
- With display: the smart screen display for mks mini 12864 v3.0 memory card(not include) has an rgb backlight, allowing the light color to be changed online. also support firmware such as for robin v2 v3, for sgen‑iv1v2, for gen‑lomarlin2.x, and for klipper. with encoder, parameter adjustment can be realized, as well as file selection printing. plug and play on for ramps...
- Applicable model: this is an on board for esp32 wifi 3d printer master board. support for marlin2.0 firmware. in addition to ordinary lcd2004 and 12864 screens, also support for mks mini12864 v3 and for mks tft serial screens. the motherboard can update the firmware via usb, and connect to the network and web pages through wifi function to control the 3d printer
- Powerful function: the motherboard use for esp32 wroom 32u module, embedded dual wire 32 bit high speed mcu, and integrated wifi, bluetooth module, performance is very powerful
- Byte storage: the mainboard module has an 8 byte flash memory chip, which provide effective protection for more application scenarios
SHOWview product -
Product Highlights
- ✅【powerful performance】: equipped with 32-bit 64mhz arm cortex-m0+ series chip, more consistent and faster.the tps5450-5a power chip allows for power input of dc12/24v, with the chip's current output up to 5a, peak value 6a, which perfectly supports the power supply of the core board.
- ✅【higher security】:esd protection device at usb and ethernet ports help to prevent electrostatic hazards.the protection circuit on thermistor prevents the main control chip from burning due to leakage of the heated bed or heater cartridge.
- ✅【integrated design】:onboard same btb connector with raspberry pi eco, you can directly install cb1, or raspberry-pi cm4, etc., run linux system efficiently, and use klipper firmware.in addition, it is possible to run the marlin firmware independently without cb1/cm4. the best choice for voron v0,ender 3 3d printer!
- ✅【multiple functions】btt manta m4p v2.2 support stepper driver spi/uart/step/dir working mode such as tmc2209/tmc2208 etc,bltouch,microprobe v2.0,sfs v2.0 smart filament sensor, rgb lights, auto shutdown and other functions.onboard hdmi interface, dsi/csi interface (need to be used with cm4), bring higher picture quality experience, widely compatible with various cnc fans.
- ✅【firmware upgrade】: mcu can be upgraded through sd card, or mcu firmware can be updated through dfu via klipper's "make flash" command. if you have any problems regarding bigtreetech manta m4p v2.2, please feel free to contact us on amazon.
SHOWview product -
Product Highlights
- 【widely application】compatible with creality ender 3, ender 3 pro, ender 3 v2, ender 3 max, ender 5,ender 5 pro 3d printer. please notice: it only plug and play for ender-3. if you want to install it on other machine, please flash the machine firmware. you can download firmware from official website.
- 【update firmware】please copy the firmware file to a formated sd card with no other files in it. turn off the printer and unplug the power cord. insert the sd card & power cord, and turn on the printer. wait 10s to complete the firmware updating process.
- 【super quiet】the silent mainboard can reduce stepper motor noise. tmc ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50db).
- 【driver】tmc2225 driver & creality v0.0.6 firmware ( based on marlin 2.0.1) for v4.2.7 board. the bootloader has been preinstalled.
- 【after sale service】any issues or questions about our product please feel free to contact us at any time. we have professional technical team to provide technical supports for you within 24 hours.
SHOWview product -
Product Highlights
- Solve hot bed mosfet heating：support 24v input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the mosfet of heated bed heats. use high quality mosfet, better cooling effect and more stable. use ch340 serial port chip, more easily install the drive than 16u2.
- Reserve external driver signal：reserve external driver signal, available to connect external high current driver to drive the 57 and 86 stepper motors. 2560 and ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning.
- Supported devices：support a variety of stepper drivers such as a4988, drv8825, tmc2100, available to change the stepper drivers and motors as users like. support ramps 1.4, 2004lcd,12864lcd, tft28 and tft32. run marlin firmware, the configuration is completely same as ramps 1.4, and available to directly replace the ramps 1.4.
- Stable filter circuit：stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. use specific power chip, support 12v to 24v power input, and resolve the problems of chip heating and power shortage.
- X axis/y axis/z axis：x axis, y axis and z axis with different color terminal controls the stepper motors and endstops, which is convenient to wire. plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
SHOWview product -
Product Highlights
- Built in 8m byte flash memory chip: this 3d printer motherboard has a built in 8m byte flash memory chip to provide effective protection for more application scenarios.
- Software control: this motherboard allows for quick engraving and web control, mobile app control, etc. the for mks dlc32 has mounting holes and board size compatible with the for mks dlc and can also be used with for grblaser and for lightburn pc software.
- High performance: this motherboard is equipped with a 32 bit stm32 processor, support for storage card storage, expandable wifi module, power failure relay module, break material detection switches and external card slot, providing high performance.
- 2.4 inch ts24 r v2.1 touch screen: this touch screen provides a clear readout that simplifies the user's operation process, with a clear ui interface that intuitively presents the desired functions for easy operatio.
- High accuracy: this 3d printer touch screen is able to work highly with the machine controller, thus providing high accuracy printing operation and printing excellent and stable products.
SHOWview product -
Product Highlights
- Outputs: pwm dc 3 way outputs, way 1 for high currents, way 3 for medium currents, and way 2 for small currents.
- Usb interface: comes with usb interface, the light weight control board allows for simple and secure connection.
- Better design: the 3d printer motherboard supports 12‑24v input, the main board for self leveling proximity probe enables less heat during work.
- Motherboard for anet a8 3d printer : this 3d printer motherboard adopt on board 4 way a4988 16 subdivision stepper driver board motor for good efficiency and stability.
- Perfect match: this 3d printer motherboard can directly connect to for ramps1.4, 2004lcd control board and 12864lcd control board, very practical.
SHOWview product -
Product Highlights
- 🐙【can bus】btt octopus v1.1 control board supports can bus connectivity using an ethernet connector. this can bus connection allows to expand control board with other expansion boards very easily.
- 🐙【supports klipper/marlin】btt octopus v1.1 supports running klipper and marlin.supports firmware update by usb (recommended) and dfu mode(advanced users). updating via dfu mode is to send firmware to the board directly from pc with no need for bootloader, which is not recommended for novice users.
- 🐙【main control chip】: bigtreetech octopus v1.1 motherboard adoptes arm cortex-m4 series stm32f446zet6 32-bit microcontroller at 180mhz with 512kb flash rom. notice: input voltage only supports 24v, 12v is not allowed.
- 🐙【6 pwm fans plus 2 】the octopus v1.1 mainboard offers up to 6 controllable pwm fans and additional 2 without control with the possibility of voltage selection from 5v, 12v or 24v.the btt octopus also has 8 sockets for drivers, making it an ideal electronics for demanding machines.
- 🐙【online/ offline printing】supports “print from sd card” and “print via usb otg” using the integrated usb-a port. usb-c interface supports an emulated serial port that allows printing via usb.
SHOWview product -
Product Highlights
- Driver: tmc2225 driver. marlin 2.0.1 and bootloader installed. you can copy the firmware file to a formated sd card with no other files in it. turn off the printer and unplug the power cord. insert the sd card & power cord, and turn on the printer. wait 10s to complete the firmware updating process.
- Eeay to operate: with usb port,can be worked with e/z/y/x axis motor.
- Silent function( customized and non-standard matching)! upgraded v4.2.7 silent board has been updated from 8 bit to 32 bit.
- Thermal runaway protection is enabled. the board is optimized by circuit, effectively solve the heating problem.
- Firmware 2.0.1 comes pre-installed on this board. plug and play for ender-3. if your printer is not ender 3 or you would like to add a bltouch please download the firmware here. https://www.creality.com/download
SHOWview product -
Product Highlights
- 🔥three cnc fan: increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;
- 🔥usb micro b: the pc communication usb interface is upgraded from mini usb to micro usb b, which is more adaptable;
- 🔥main control chip: adopt stmicroelectronics' latest g0 series main control chip stm32g0b1ret6 or stm32g0b0ret6;
- 🔥increased heat sink: redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance;
- 🔥output power supply: increase spi output port +3.3v power supply, external spi sensor power supply voltage +3.3v and +5v are optional, support the motherboard to directly supply power to peripherals.
SHOWview product
Coupon copied
