10 Best
Water Pump Replacement Parts
-
Product Highlights- Comes with 4 suction cups on bottom of pump
- Works with catit senses cat drinking fountain (50761)
- Replacement pump for catit flower fountain with triple action filter
- Does not included an usb adapter and is to be used only with #50043 usb adapter (available separately).
- Works with catit 2.0 flower drinking fountain (43742/43742w)
SHOWview product -
Product Highlights
- Material:silicone, stainless steel
- Compatible model:for saluspa, lay-z-spa, airjet, miami, palm springs, hawaii, helsinki, honolulu, milan, st. moritz, paris, cancun, havana, cali, tahiti
- Type:repair & maintenance kit
- Set includes:shaft, impeller, o-ring, screw
- Not compatible with hydrojet models.
SHOWview product -
Product Highlights
- Details of size: this utility pump impeller is approx. 1-3/8 inch diameter, and 1/2 inch width, d shaped, insert to fit 5/16 inch diameter shaft
- Efficiency improved: this utility water transfer pump impeller is designed to be installed into the inside of the water pump, replace the impeller that cannot work again, prolong the service life of the water pump and improve the work efficiency
- Water pump replacement parts: there are 2 transfer pump impellers in the package, which can be applied to replace the impeller in the water pump, sufficient to meet your daily uses and replacements
- Durable and reliable: the exterior of the utility pump replacement impeller is made of quality rubber, which is sturdy and durable, not easy to break or deform, serving your long term use
- Compatible models: this water pump impeller kit fits 1/10 and 1/12 ac and dc motors of many utility pumps, compatible with trupow models pas-30 and pds-30
SHOWview product -
Product Highlights
- 5 pack water pump impeller, insert fits 5/16"(0.79) diameter shaft
- Similar in design to stock oem units and require only simple hand tools for installation.direct replacement,oe level quality and durability.
- 1-3/8"(3.5cm) diameter x 1/2"(1.27cm) width with d shaped
- Fits trupow model pas-30 & pds-30, many utility pump brands with 1/10th and 1/12th hp ac and dc motors
- Water pump impeller 100% compatible with oe parts and passed ts16949 certified.
SHOWview product -
Product Highlights
- Oem part number is replaced by 0394711, 0391698, 0386697, 0387610, 46-02855, 0389112, 0318875, 0318999, 0319989, 0386685, 0386697, 0386886, 0388139, 0389114, 0391388, 0391689, 0393560, 0777801.
- Package included: neoprene impeller, wear plate, insert cup, impeller key, "o"- ring, water seal, pump housing, crommet and install bolts as pictures showed.
- Very important-different model, same horsepower and year may have a big difference. please check your outboard model, serial number and year before place the order. you can ask us questions if you are not sure, we would pleasure to help you.
- 0394711 - water pump impeller repair kit with housing, replacement for 8hp 9.9hp 15hp evinrude johnson omc brp marine outboard engines. more detailed information please see description below.
- Compatible with sierra 18-3327, 18-3400, mallory marine 9-48201, glm 12050, sei marine 96-361-01k.
- Installation instructions: lubricate with silicone grease, glycerin or dish soap when installing. (not included). this impeller kit makes repair and maintenance of water pumps easy.
SHOWview product -
Product Highlights
- Nice fit: with a 1-3/8 inch diameter and 1/2 inch width, the impeller replacement can fit onto 5/16 inch diameter shafts; its d shape design ensures a secure and stable attachment
- Improved efficiency: replacing your old impeller with the transfer pump impeller, you can experience improved pump efficiency; the specially designed d shape and optimal width contribute to better water flow and pumping performance
- Sufficient quantity: the package includes 6 water pump replacement parts, providing you with an ample supply for multiple replacement needs, allowing you to use and share
- Durable and reliable: the impeller water pump is made of rubber material, which is durable and sturdy, not easy to break or deform; the pump impeller is built to withstand continuous use and resist wear and tear, allowing it to perform efficiency
- Wide compatibility: the utility pump impeller is compatible with 1/10 and 1/12 motors; it is specifically engineered to be a suitable replacement for pas 30 and pds 30 model pumps, ensuring an ideal fit
SHOWview product -
Product Highlights
- ✅ 𝟏𝟎𝟎% 𝐋𝐈𝐅𝐄𝐓𝐈𝐌𝐄 𝐖𝐀𝐑𝐑𝐀𝐍𝐓𝐘: customer satisfaction is our priority. if for any reason you're not completely satisfied, we will compensate you and offer extra benefits to ensure your rights. buy with confidence!
- ✅ high compatibility: the w10130913 drain pump is made exactly fit for most top name brands (whirlpool, kenmore, maytag, inglis, amana) and replaces part numbers: ps11757304, ap6023956, wpw10730972, 8540024, 8540025, 8540027, 8540028, 8540996, w10117829, w10130913, w10183434, w10190647, w10190648, w10201457, w10730972, w10135045, w10130913-b, 8540024-b, ap4308966, ps196...
- ✅ easy to install: this part is made perfectly fit and replace oem original part that you can easily install it yourself and fix your washer within few minutes. to complete this repair you will need a 1/4 inch nut driver, 5/16ths nut driver, a flat blade screwdriver, and a pair of pliers. make sure to disconnect power to the washer before beginning this repair
- ⚠️important note: please check the model number carefully before ordering. if you are unsure about the compatibility, you can send us your washer model number, we can help you confirm if it fits or not.
- ✅ model number: w10130913 washer drain pump
- ✅ premium quality: the replacement part is made from durable high quality material and well-tested by the manufacturer - meets oem standards - ensure long-lasting and effective operation. this part fixes the following symptoms: will not drain | pumps but will not spin | leaking | noisy
SHOWview product -
Product Highlights
- Transparent design: easy to know when it's time to clean out the container bowl of the strainer, convenient for you to clean out the supply line and wash
- Compatibility: the water pump strainer is compatible with wfco and shurflo pumps
- Rv pump strainer specification: 50 mesh stainless steel screen, twist-on water strainer, 1/2 inch npsm inlet, 1/2 inch npsm outlet
- Easy to assemble: simply unscrew to release and clean it, just reassemble it back onto your water pump after you wash it
- Practical combination: sediment filter is important for prolonging the life of your water pump, preventing wear and tear, you can rest assured to enjoy clean fresh water
SHOWview product -
Product Highlights
- Pet fountain pump: submersible pump for quiet operation
- Pump color varies: the color of the faceplate on the pump varies between blue and black
- Compatible petsafe fountains: butterfly, pagoda, sedona, seascape, avalon, zen, stainless steel, 360 plastic, creekside, seaside and multi-tier pet fountains
- Convenient: works great as a back-up pump during pump cleaning
SHOWview product -
Product Highlights
- Fits all coleman saluspa airjet models, including 54112, 54124, 54129, 54131, 54145, 54155, 54176, 54185, 54186, 54190, 54295, 54297, 90443, 90437, 90363, 90427, 13801, 13804, 15442, s100105, 60002, and all other airjet variants.
- Package include: 1 x customized pump impeller w/rubber bushings, 2 stainless steel shafts, stainless steel screws with nyloc nuts, full set of silicone seals:oval-shaped pump housing gasket (not a stiff round o-ring like other kits), pump input/output o-rings (note: you will have 1 or 2 left over, depending on pump type).
- All versions of the #p4071 and 58113 water pump for coleman saluspa hot tubs
- Compatible with all of the following model: for saluspa, lay-z-spa, airjet, miami, palm springs, hawaii, helsinki, honolulu, milan, st. moritz, paris, cancun, havana, cali, tahiti.
- This kit fix’s the eo2 code. the water pumps in these products all use custom impellers with very specific dimensions. the slightest difference in dimension or magnet strength can cause the impeller to be incompatible.
SHOWview product
Coupon copied
