8 Best
Voltage Regulator For Solar Panels
-
Product Highlights- [solar power input 100w max.]--max. input voltage:22volt dc, max. current:7 amp, solar panel 100 watt maximum. power output: 12 vdc battery. it can work with 5w 10w 20w 30w 50w 60 watts 100watt solar panel.
- [quick and easy connection]--this solar battery charger controller coming with versatile quick connect and quick disconnect clips sae plug cable, quick and easy connection to solar panel,battery and load appliance. users don’t worry about the positive(+) and negative(-). get a 'sae polarity reverse adapter' if your polarity is reversed,please check the asin b07gpgptfv.
- [for 12v dc solar systems]--this 7a solar battery charge regulator use only for 12 volt dc solar power systems, solar panels and 12 volt rechargeable batteries protection. {important: always connect the battery first and disconnect last.} if you need a 12v dc quick connect 16ft extension cable, please check the asin: b06x6ljtd6 .
- [led indicators for easy monitoring]--this solar battery controller integrated with 3 led indicators（green.yellow,and red） for low voltage(over discharge protection),charging and high voltage(over charge protection).
- [full protection and more safe]--this solar charging regulator protects over charge protection, over discharge protection, over load protection. {if you need sae extension cable, battery clamps,male/female cigarette lighter plug and 12v adapter for solar controller solar power system, please check the asin b06x6ljtd6.}
SHOWview product -
Product Highlights
- 【the maximum input of solar energy is 130w】:the maximum power of solar panels is130w, the maximum voltage 22v, and the maximum current 8a. it is suitable for 12v rechargeable batteries. in order to lengthen its service life, please do not overload.
- 【quick and easy connection】:this solar charge controller uses sae plugs for easy use and access to solar panels, batteries and loading equipment. users don't have to worry about positive (+) and negative (-)
- 【 apply to 12v solar panels】:the 8a solar controller is used only for 12v solar panels and 12v batteries. the solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
- 【easy to monitor the led indicator lights】:the solar controller integrates two led lights, green (fully charged) and yellow (charging). the product also provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection
- 【all-round protection 】:the product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection. 【the controller needs to be connected to a battery to work. 】【advantage 1: 】 it will turn off automatically at night, and won’t consume battery power. 【advantage 2: 】if there is connection errors，it will not be damaged.
SHOWview product -
Product Highlights
- Li compatibility: not only compatible with traditional battery, the pwm controller also has clear and special icons for various lithium batteries on the lcd screen, such as lfp for lifepo4, li for ternary lithium battery, lto for lithium-titanium-oxide. with setting to li battery type, this solar charge controller also has a function to jumpstart your lithium battery in...
- Solar panel regulator: max pv input voltage 55 volts, this solar panel regulator can handle 150 watts input for 12 volts battery system, 300 watts input for 24 volts system. most controller can only handle 120 watts input with max input voltage at 50 volts, this controller can handle 20 watts more and produce 20 watts power more.
- Easy-read backlit display: to check the pv status and the battery status easily, the 30a solar panel regulator will cycle the pv input current and the battery voltage on the main interface with real-time value every 3 seconds, also has color code icons. with a larger screen and 50% brightness in no operation, the solar charge controller is easy to read in dim light. all...
- Battery compatibility and maintenance: compatible with various 12v or 24v batteries, such as sld, fld, gel, agm, sla, lifepo4, ternary lithium battery and lto battery. including the ability to program the solar charge controller for best charging and maintenance of various battery types. the solar panel regulator is dependable to be your battery maintainer.
- Neat and safe wiring: come with 3 pairs of spade terminals, it is easy to grip the wires more firmly and make a neat wiring. please note that turn the screwdriver counterclockwise first, in order to open up the wire clamp holes. hook up the battery first, positive wire, then negative wire. after that, connect the controller to the solar panel, please note that do not di...
SHOWview product -
Product Highlights
- Safe to use: the solar panel controller has overcurrent short circuit protection, reverse polarity protection, and low voltage overcharge protection. adopts full 3-level pwm charge management.
- Intelligent and useful: the solar controller has a built-in industrial microcontroller, which automatically manages and memorizes various parameters set by the user, and the data will not be lost when the battery is exhausted.
- Wide compatibility: the solar charge controller is automatically compatible with 12v or 24v systems and is suitable for a variety of batteries: lead-acid batteries, lithium iron phosphate batteries, and ternary lithium batteries.
- Lcd display: the solar panel charge controller has a large lcd, which can switch modes and adjustable parameters, clearly indicating the status and data.
- Easy to apply: the solar charge controller should connect the battery first, then the solar panel, and finally the load. it can be used for home, industry, commercial, camping rv, etc.
SHOWview product -
Product Highlights
- ✔️【intelligent protection】intelligent 3-stage pmw charging improves charging efficiency. the solar controller not only extends battery life and improves system performance, but also has multiple protection functions: battery under-voltage, over-voltage, output overload, short circuit, battery, solar panel anti-back connect protection.
- ✔️【easy to install and operate】the solar panel controller adopts sae port, plug and play. a manual with clear connection steps is included. there are 2 pre-drilled holes on the controller, you can install it anywhere according to your needs!
- ✔️【waterproof solar charge controller】ip67 waterproof, suitable for outdoor use. automatically identify voltage, 12v max power: 150w, 24v max power: 300w. the maximum current is 10a. compatible with various 12v/24v deep-cycle batteries, such as agm, gel, flooded. adopting brand mcu chips to realize fast intelligent control and ultra-low standby power consumption.
- ✔️【indicator monitoring】you can understand its current working status through the three indicators on the solar panel charge controller. load normal output: green light is always on; battery is normal: green light is always on; solar panel is charging normally: red light is always on.
- ✔️【what you get】1 solar charger controller, 1 manual. extended 12 months warranty and our 7*24h technical service support. if you have any questions, please contact us directly.
SHOWview product -
Product Highlights
- Multiple intelligent protection: solar controller has short-circuit protection, open-circuit protection, reverse protection, over-load protection. fully 3-stage pwm charge management, improve system efficiency and prolong the life span of the battery. for protecting the lifespan of your battery, once the voltage of the battery drop below 8v, the solar controller will tu...
- Build-in industrial micro controller: 16ad sampling accuracy, temperature charging current, discharge current accurate real-time display, power generation at a glance. automatically manage the working of solar panel and battery in solar system to support charging.
- 60a mppt solar charge controller: rated discharge current:60a; dual usb output voltage: 5v/2.5a; battery voltage: 12v/24v. using innovative mppt technology high tracking efficiency up to 99%; our solar controller mppt technology is to detect the maximum charging current, not the boost type or the automatic charging of the solar panel voltage.
- Multi-function lcd displays: this controller is 12v/24v automatically adapt. first connect the battery, then connect the solar panels, when you first use it, make sure the battery has enough voltage so that the controller can recognize the correct battery type.
- Easy to install and operate: the charge controller should connect the battery first, then the solar panel, and finally the load! the disassembly sequence is contrary to the wiring order. dual reverse current protection, low heat production. charge controller not to connect the grounded to make the light run. it can charge the battery and supply power to the load at the ...
SHOWview product -
Product Highlights
- Dual usb port output is more convenient, in line with the current needs of various electronic products.
- Pcb circuit board, military quality, anti-aging, effectively improve a full level.
- 100% brand new high quality, high quality products provide you with high quality assurance.
- Clear led large display with digital display, voltage, load identification, battery level identification, charging identification, etc.
- The product is very versatile and is an upgraded product of the traditional solar charge and discharge controller.
SHOWview product -
Product Highlights
- 【characteristics】 this buck converter is equipped with lcd display, acrylic case and heat sink. lcd screen can display input/output voltage, output current and output power. voltage precision is 0.05v, current precision is 0.005a. acrylic case can keep the converter board away from dust, which is protective. heat sink can keep module 120w for long-time using in a low te...
- 【protection】 it has reverse-connect protection, short circuit protection and over current protection. when you connect the input wire reversely or short circuit, the module will not burn. and roate the cc potentiometer to set over current protection value you want.
- 【parameter】 drok power supply module input volt range is dc 5.3-32v; output volt range is dc 1.2-32v which is variable. output current can reach to 8a and output power can reach to 120w for long-time use. if enhance heat dissipation, this converter can reach 12a and 160w output.
- 【easy operation】 a user manual will be included in package, which can help you easier to operate. the button can control ouput voltage on/off status, and you can set the default output state is on/off for the next time. the potentiometer can help you to adjust volt amp in a simple and fast way.
- 【application】 the volt conversion board can be used for 5v 6v 9v 12v 24v 30v 32v 3a 5a 10a devices, like solar panel, lab, experiment, rv, all-terrain vehicle, car, battery charger, led stripes, etc.
SHOWview product
Coupon copied
