10 Best
Utilitech Sump Pumps
-
-
Product Highlights
- Tough thermoplastic construction; 10' cord length
- Removable suction screen and handles up to 1/8 inch solids
- 1/3 hp utility pump moves up to 2,400 gallons per hour; pump will lift water up to 25' of vertical height
- 1-1/4 inch npt discharge for hight capacity pumping; includes 3/4 inch garden hose adapter
- Superior pumps are built to last, engineered with quality components and are 100% factory tested
SHOWview product -
Product Highlights
- Auto float switch:start/stop automatically. when water level is below 4.7 inch, it will automatically disconnect the power; when water level rises above 4.7 inch, the pump will start again. cut off immediately when pump fails to pump water to prevent the coil from getting burned.
- Multi outlet size: submersible water pump is equipped w/ screw thread in ght 3/4 inch or npt5/8 inch . three fittings with different diameters for outflow( ght 3/4 inch , npt 1 inch , ϳ8, g 1-1/2 inch ) to choose from according to the flow rate.
- Powerful sump pump:750 watt, 1 hp motor. max lift: 16 feet; 3302 gallon per hour rating tackles any draining job at a fraction of the time. this pump easily passes solids up to 1 inch in diameter. great for flooded area, swimming pools, cellars or garden pond.
- High-quality materials:thermoplastic composite material is highly rugged. designed and manufactured in line with the valid safety requirements. thermoplastic body resists corrosion as there are not exposed metal parts. lower noise and energy-efficient. oil free motor requires no maintenance.
- Great for draining:great to drain the dirty water from the pond, garden pond, or water tanks. great to move water for garden irrigation or cleaning your yard or road.
SHOWview product -
Product Highlights
- 【 mini sump pump for condensate removal 】 - this is a mini size condensate drain pump with 5 ft max. head and 55 gph max. flow for commercial ice machines, portable ac units, dehumidifiers, boilers and furnaces. not limited to any brand and model. you can easily place it in any reservoir that can hold water to drain water.
- 【 super quiet for indoor use 】 - working noise below 15 db. you can safely put this condensate pump in your bedroom and use it with your portable air conditioner and dehumidifier. it will not cause extra noise to disturb you.
- 【 mini size 】 - 2.24'' × 1.38'' × 2.2'' (l × w × h), using tubing with a 1/3 inch i.d. auto / small / strong / easy to mantain.
- 【 usage precautions 】 - if the pump cannot lift the water to 5 ft, it indicates that there is air inside the pump. you just need to prime the pump, unconnect the tubing and completely immerse the pump in water and start pumping once to discharge the air in the pump. then connect the tubing again. the power adapter of this mini sump pump can adapt to voltages ranging fro...
- 【 automatic double water level sensing technology 】 - when the water level reaches the high sensor, the automatic water pump will start to drain water. when the water level returns to the low sensor, it will stop draining. automatically control water level and prevent frequent start-up.
- 【 come with a 6.6 ft tubing, easy to install and operate 】 - in order to facilitate your use, we have equipped this condensate pump with a tubing. you only need to follow the simple steps in the manual to complete the installation. please pay attention to any kinks on the hose to ensure that water can flow through normally.
SHOWview product -
Product Highlights
- 【powerful sump pump】3040 gph, 1/3 hp, max lift: 29 ft; acquaer submersible clean/dirty water pump moves up to 3040 gallons per hour rating tackles any draining job at a fraction of the time. perfect for water supply, drainage in deep well, field irrigation garden irrigation and greenhouses.
- 【high-quality materials】the submersible water pump is made of high-strength, corrosion-resistant reinforced thermoplastic materials. it will provide trouble-free service for a long time when properly installed.
- 【auto float switch】equipped with an automatic float switch. when the water level higher than the pump, the pump will start working automatically under the control of float switch. when the pump fails to pump water, it will automatically disconnected the power.if the water level is higher than the pump again,it will work again.
- 【ingenious design】the higher base plate and top suction design helps eliminate air locks and filters debris. for safety, the pump motor has an automatic thermal protector that will turn off the pump if it becomes too hot automatically. once the thermal protector detects that the pump has cooled to a safe temperature, it will allow the pump to operate normally.
- 【customer satisfying guarantee】 acquaer sump pump comes with 3-year warranty, please do not hesitate to contact our service team on amazon, we are here to help for any concerns within 24 hours.
SHOWview product -
Product Highlights
- Ideal safeguard system: a flooded basement can cost thousands of dollars in damages. the best way to protect yourself from this kind of disaster is with a backup sump pump. this dual water pump installation kit makes it easier for you to install a backup system to avoid what could potentially be a major inconvenience.
- What's in the box: this kit contains a y-connector, two (2) 1-1/2" threaded silent check valves, stainless steel clamps and buna-n rubber couplings. the only thing you'll need to put everything together is a standard screwdriver. this kit is compatible with all pumps that have a standard 1-1/2" npt pump discharge/output.
- Easy installation: installing a backup sump pump can be tedious but not with the pumpspy dual pump install kit! this kit comes with everything you need to connect 2 sump pumps together to a single discharge line. all you'll need for the process is a standard screwdriver. install your pumps in a fraction of the time.
- Hassle-free set up: there's no cutting or gluing required during installation with this dual pump backup installer kit. everything you need to connect a back up sump pump is in the box. there’s no need to purchase a pvc pipe, elbows, couplings and cement. say goodbye to messy, laborious installations!
- How to install: simply screw the check valves into both pumps, drop the y-connector into the check valve boots, attach the rubber boot to the top of the y-connector and then to your existing discharge line. tighten all the stainless steel clamps with a screwdriver and you’re done. it's that easy!
SHOWview product -
Product Highlights
- ✅【safety ensure & durable】upgraded sealing structure gives pump longer durability, which is much longer than regular mechanical seal. full corrosion-resistant shell and thermal protection ensures the pump will not be burned out, even when the pump triggers thermal overload protector, the pump will rework after cooling down.
- ✅【manual operation】for the customers who don't like to use the float switch, you can just simply attach it on its side slot, so that the pump becomes manually controlled. this can be used when water level is low and not enough for floater freely floating in the water. pump can remove water down to 0.4", and it will keep continuously running and will not turn off automat...
- ✅【widely application】pump also comes with a 26.2 ft long cable cord and a 26ft rope, which allows the pump to go deep enough (23 ft) in the water. ideal for heavy-duty draining applications including pools, ponds, pits, wells, ditches, basements, etc.
- ✅【efficient utility pump】3/4hp powerful motor offers a maximum flow rate of 3500 gallons per hour with 1.5" discharge hose horizontally. this pump has the ability to lift water up to max 30 ft of vertical height, and can drain clean or slightly dirty water with max solid 0.2".
- ✅【automatic operation】the pump on/off is controlled by float switch. once the water pump is plugged in, it will automatically start when the water level is above 12", and stop working when reaching the stop-level of 2". when you start to use this pump, tilt and submerge the pump into water for a few seconds to expel the air inside of the pump.
- ✅【easy to install】comes with three plastic adapters: ght 3/4", npt 1" and 1.5" male thread connectors. ght 3/4"+npt 1" connects standard garden hose for quickly installation; 1.5" discharge port connects discharge hose for maximum output flow rate, this adapter has three different diameters outlets (diameter 1 inch ,1-1/4 inch, 1-1/2 inch) to adapt for different size ho...
SHOWview product -
-
Product Highlights
- 【safety ensure & durable】upgraded sealing structure gives pump longer durability, which is much longer than regular mechanical seal. full corrosion-resistant shell and thermal protection ensures the pump will not be burned out, even when the pump trigger thermal overload protector, pump will rework after cooling down.
- 【manual operation】if you don't like to use the float switch, or the water level is low and not enough for floater freely floating in the water, you can just simply attach it on its side slot, so that the pump becomes manually controlled. pump can remove water down to 2.4", and it will keep continuously running and will not turn off automatically, so remember to cut off ...
- 【widely application】pump also comes with a 26.2 ft long cable cord, which allows pump to submerge deep enough (23 ft) in the water. ideal for heavy-duty draining applications including pools, ponds, pits, wells, ditches, basements, etc.
- 【powerful performance】3/4 hp powerful motor ensures effective flow rate up to 3300 gph with 1.5" discharge hose horizontally. this pump has the ability to lift water up to max. 27 ft vertical. this sump pump works with clean and dirty water which contains solid less than 1".
- 【automatic operation】the pump on/off is controlled by float switch. once the water pump is plugged in, minimum water level for float switch automatically starts from 20", and stop working when reaching the stop-level of 10". when you start to use this pump, tilt and submerge the pump into water for a few seconds to expel the air inside of the pump.
- 【easy to install】comes with three plastic adapters: ght 3/4", npt 1" and 1.5" male tread connectors. ght 3/4"+npt 1" connects standard garden hose for quickly installation; 1.5" discharge port connects discharge hose for maximum output flow rate, this adapter has three different diameters outlets (diameter 1 inch ,1-1/4 inch, 1-1/2 inch) to adapt for different size hose...
SHOWview product -
Product Highlights
- ✔️【compact & lightweight】portable handle design with 16.4 ft power cable and a 26 ft nylon rope, makes the pump easy to carry and install. item weight: 6 lb. this pump can be used in the min 7"x7" pit. it's perfect for a water tank, hot tub, rain barrel, swimming pool, garden pond and so on.
- ✔️【safety & durable】full corrosion-resistant shell and environmental thermoplastic construction with thermal overload protection ensure durability for household and utility applications. etl listed.
- ✔️【buy with confidence】provide lifelong technical consultation and 24h customer service. one-year limited warranty.
- ✔️【efficient utility pump】1/4 hp powerful motor offers a maximum flow rate of 1900 gallons per hour with 1" discharge hose horizontally. this pump has the ability to lift water up to max 23 ft of vertical height, and its max immersion depth is 13 ft. draining clean or slightly dirty water with max solid 0.2".
- ✔️【simple plug-in control】it works by manually plug in/out operation, the minimum water level to start working is around 6", and it can remove water down to 0.6". just don't risk the pump to be dry running.
- ✔️【easy installation】two plastic hose adapters are included: ght 3/4" connects standard garden hose for quick installation, and 1" connects discharge hose for high capacity pumping.
SHOWview product
Coupon copied
