10 Best
Tripod Head For Ipads
-
Product Highlights- Adjustable length: 6.3-9.25 inches/16-23.5 centimeters can be flexible adjusted by screwing in or screwing out the adjustment knobs
- Compatible: compatible with ipad mini, ipad 2/3/4, ipad air/air2, ipad pro, samsung tab 7.0 series supports and other tablets within 6.3-9.25 inches length
- Two 1/4" screws thread hole: features two 1/4" screw thread holes under the bottom and the back of the holder to mount your tablet to a tripod, monopod, selfie stick, or any tripod
- Ptotect rubber pad: features two rubber pads inside the two ends to protect your device from scratches, and also prevent the ipad from falling off
- Material: made of sturdy but light plastic, 70g weight, more portable for carrying around and storage
SHOWview product -
Product Highlights
- 【universal compatibility】kdd tablet tripod mount has the 5.3-10.6” width opening, which fits different size screen cell phones and tablets, such as ipad 1 2 3 4 5 6 7 8 9, ipad mini 1 2 3 4 5 6, ipad air 1 2 3 4, ipad pro 12.9" 11" 10.5" 9.7", iphone 13/13pro/13pro max, 12/12 pro/12 pro, 11/11 pro/11 pro max, x/xs/xr/xs max, galaxy tab, surface pro, nexus, kindle fire etc.
- 【360°adjustable angle】this ipad mount for tripod comes with a high-quality & durable swivel metal ball head, allowing you rotate or adjust the angle of the tablet between portrait and horizontal orientations to meet your needs at different angles.
- 【more stable & secure】the upgraded ipad tripod mount adapter is built-in reinforcing rib in the middle of the base. powerful spring-loaded arms and large jaws combined to make sure your device being held steadily. moreover, the ipad clamp mount base and jaws are covered with non-slip pads to protect your device from scratches and slips, reducing the risk of its falling.
- 【wide application】equipped with 2 standard 1/4" screw holes on the bottom and back of base, this ipad holder for tripod supports mounting tablet to steering gimbal, tripod stand, selfie stick, ring light tripod or any devices with standard 1/4"-20 thread. perfect for video recording, selfie, remote teaching, online courses, live music shoot, zoom meeting, watching movie...
- 【friendly design】the ipad holder stand, based on a stretchable spring design, has a locking knob for easy width adjustment to fit different sized devices. jaws on both sides have reserved charging space which make it easier for tablet charging.
SHOWview product -
Product Highlights
- Multi-angle rotatable: this tablet mount for tripod comes with a a swivel ball head and a metal arm, allows the ipad tripod mount adapter can be rotated 360° and tilted 180°. easily switch between landscape and portrait modes, perfect for self-shooting, live broadcasting, remote teaching and video recording etc.
- Wide compatibility: this tablet holder has the 135mm(5.3 inch) - 305mm(11.8 inch) width opening, which is fit for all 4.7"-12.9" screen mobile phones and tablets, including ipad pro 12.9 / 11 / 10.5 / 9.7 inch, ipad air 3 4 5, ipad 7 8 9, ipad mini 4 5 6, surface pro, samsung galaxy tab a 7 / 8 / 9.7 inch, samsung galaxy view / note pro / tab pro, samsung galaxy s20 s10...
- Heavy-duty tablet tripod mount: this ipad holder for tripod has an aluminium arm and a metal base, can steadily hold the 12.9inch ipad pro horizontally and vertically. the combination of powerful spring-loaded arms and large jaws ensures your device remains stable on a tripod, a perfect accessory for a tripod.
- Universal tripod mount adapter: equipped with two standard 1/4" screw holes, one located at the tripod adapter base and one located at the bottom of the tablet clamp, so you can easily mounting to tripod stand, monopod, selfie stick rod, camera tripod, ring light tripod, tabletop tripod or any devices with standard 1/4"-20 thread. this tablet holder also equipped with 1...
- Easy to install and use: this tablet tripod clip mount has a sturdy metal base for quick installation on tripod, and the clip holder automatically adapts to the size of the tablet, eliminating the need to manually adjust the clip length. jaws on both sides have reserved space allows you to connect the charging cable while using this tablet holder.
SHOWview product -
Product Highlights
- 【360 degree ball head】fotopro mini tripod with swivel ball head for 360-degree panorama and 90-degree tilt, allowing tilt and swivel movement, portrait or landscape options. allows you to easily position your phone where you need it for a superior viewing angle. great for social live streaming, vlogging, youtube video shoots and more.
- 【wide compatibility】fotopro 2 in 1 tablet phone tripod mount is compatible with most smartphones and tablets ranging from 2.6 inches (6.6 cm) to 8.8 inches (22.35 cm) for iphone, android, etc. the mobile phone holder is equipped with a cold shoe, which can be connected to a fill light, a microphone, etc.
- 【flexible tripod legs】fotopro phone tripod can be twisted into any shape, and you can wrap it around trees, bikes, poles, railings, branches or chairs, allowing you to record great moments regardless of the venue.
- 【lightweight and portable】a great choice for vloggers on the go! fotopro mini tripod weighs only 320 grams and measures 25.5 cm long. it's portable and fits easily in your pocket or briefcase.
- 【high quality】fotopro mobile phone tripod flexible feet are made of high elasticity and environmentally friendly rubber, with an inner aluminum core, which is more stable and durable than other foam cotton phone stands.
SHOWview product -
Product Highlights
- Ball head rotation - 360° rotation & 40° tilt supports devices in both mode landscape & portrail. 360° ball joint allows you to adjust the tablet in any angle and position
- Well made - ipad tripod adapter made of abs, the solid structure, thick spine and ball joint supporting pivot at the back centre make sure your ipad be held very steadily, not wobble.the four claws use high density sponge pad with more friction, they can tightly hold your thin tablet and protect it from scratch
- Ball head rotation - 360° rotation & 40° tilt supports devices in both mode landscape & portrail. 360° ball joint allows you to adjust the tablet in any angle and position
- Fit for all tablet - this ipad tripod mount suit for 3.5 - 13.5in tablet and smartphone with thick case. the maximum opening of the tablet clamp holer is 23.5cm (9.25in), and the size of the claw is 2 (0.8in), you do not need to remove your thick tablet case. fit for ipad 1 2 3 4 5 6, ipad mini 1 2 3 4, ipad air 1 2, ipad pro 9.7" 10.5" 11" 12.9", and samsung tab, surfa...
- Allows to access all ports without blocking magnetic connector, mic and power port. bluetooth remote shutter, perfect for taking wireless pictures and videos, especial for selfie, from up to 30 feet away
SHOWview product -
Product Highlights
- ✅【lightweight and portable design】: it’s consisted of high quality aluminium, bearing capacity is about 8 pound.weight 1.6 pounds and minimum size 17.3 inches. tripod can be folded easily to save your space,and could fit in a suitcase for carrying around.it’s perfect for traveling. package comes with a storage bag and a wireless remote which allows you take photo or vid...
- ✅【thicken trapezoidal pipe provides great stability】this strong tripod stand uses the rare rectangular tube on the market. through using all-aluminum pipe and high quality plastic floor mats, makes this tripod more sturdy than other similar products ! this tripod can withstand up to 8 pounds of pressure, stand steadily on the ground is no problem!
- ✅【67" adjustable height tripod for phone】: this 72 inches adjustable tripod which is more higher than other ordinary tripod would help you capture more wonderful scenery. additionally, 3-section flip-lever leg locks makes it easy for you to extend tripod height. maximum height is 72 inches, minimum height is 17.3 inches. height-adjustable makes it very convenient to use.
- ✅【3 way tripod head with screw attachment】:the head is equipped with a 1/4” screw which is suitable for most iphone & ipad holder/tablet/cameras/dslr /gopro. this tripod which with built-in level and a convenient handle can rotate head easily, also could select horizontal or vertical camera mode.it‘s fully adjustable and could be manipulated the pan angle easily,helps y...
- ✅【2 in 1 mount holder for phone & ipad】: the 2-in-1 mount holder that comes with is extendable ,and compatible with most models cellphones and ipad. the ipad stand can stretch up to 7.7", and the phone holder can stretch up to 3.5". compatible with: ipad pro 9.7"/11", ipad air/air 2, ipad mini. iphone 11/11 pro/xs max/xs/xr/x/8/8 plus/ galaxy note 9/note 8/s10.
SHOWview product -
Product Highlights
- ☑️【wide compatibility】this phone tripod mount has the 1.96-8.66 inches(50-220mm) width opening, which is suitable for all 4"-12.9" screen devices. compatible with most tablets, suitable for ipad mini, ipad pro, ipad air, ipad 1-9 series and all the smartphones, fits for iphone 13 pro max/13/13 pro/13 mini/se/12 pro max/x, android, samsung galaxy s21/s20/ s20 ultra, goog...
- ☑️【easy to use & compact】with a quick adjustment button and stretchable top spring, the universal tripod mount can be adjusted easily to fit the size of the phone or tablet, very easy to use and convenient. in addition, this tripod mount for iphone has a compact and sleek design, no complicated structures, simple and portable, you can take it anywhere when needed.
- ☑️【tablet&cell phone tripod mount】the tripod holder mount can not only clamp smartphones, but also tablets. besides, it can be used independently if needed. this 2-in-1 tripod mount for ipad has innovative design, the width can be freely adjusted to fit the device through the quick adjustment button on the back and the stretchable spring on the top, very convenient to a...
- ☑️【sturdy and stable】this tripod holder for ipad is made of solid abs material and high-quality aluminum alloy material, which can ensure maximum durability and can be used for a long time. besides, this tablet tripod mount has anti-slip rubber pads that are used on both sides of the clip to prevent the device from falling and scratching, so as to hold the device secure...
- ☑️【one holder for all】 this tablet phone holder for tripod is equipped with an universal 1/4" screw hole at the bottom of the clamp, which can be mounted on gimbals, tripods, selfie stick or any devices with standard 1/4" screw hole, perfect for video recording, taking photos, live streaming, online meeting and more.
SHOWview product -
Product Highlights
- 【360 degree ball head】fotopro mini tripod with swivel ball head for 360-degree panorama and 90-degree tilt, allowing tilt and swivel movement, portrait or landscape options. allows you to easily position your phone where you need it for a superior viewing angle. great for social live streaming, vlogging, youtube video shoots and more.
- 【wide compatibility】fotopro 2 in 1 tablet phone tripod mount is compatible with most smartphones and tablets ranging from 2.6 inches (6.6 cm) to 8.8 inches (22.35 cm) for iphone, android, etc. the mobile phone holder is equipped with a cold shoe, which can be connected to a fill light, a microphone, etc.
- 【flexible tripod legs】fotopro phone tripod can be twisted into any shape, and you can wrap it around trees, bikes, poles, railings, branches or chairs, allowing you to record great moments regardless of the venue.
- 【lightweight and portable】a great choice for vloggers on the go! fotopro mini tripod weighs only 320 grams and measures 25.5 cm long. it's portable and fits easily in your pocket or briefcase.
- 【high quality】fotopro mobile phone tripod flexible feet are made of high elasticity and environmentally friendly rubber, with an inner aluminum core, which is more stable and durable than other foam cotton phone stands.
SHOWview product -
Product Highlights
- 【universal compatibility】ohlpro ipad holder for tripod is compatible with any 5-13 " device,such as ipad 9, ipad mini 6, ipad air 4, ipad pro 12.9" 11" 10.5" 9.7", iphone 15 /15pro/15pro max, 14/14 pro/14 pro max, 13/13 pro/13 pro max, x/xs/xr/xs max, galaxy tab, surface pro.
- 【wide range of uses】this ipad mini mount is a convenient and durable tool for personal, family or business use. the bottom of the ipad mount for tripod is equipped with double 1/4 spiral holes, which can be directly installed on tripods, selfie sticks, and universal joints. the ipad tripod stand is a good helper that is indispensable for daily use, outdoor use, and work.
- 【stable & reliable】the ipad tripod mount has built-in non-slip rubber pads ，a double spring locking system to provide strong grip ，protects against the risk of drops and scratches can fully withstand your thick tablet. the tablet holder will not tilt at will.
- 【premium quality】the ipad mount for tripod uses high-quality ball head anti-slip material, and the ball head adapter will not loosen at will. the ipad pro holder ball head adapter is made of reinforced plastic, which is not easy to break and can be 360°flexibly adjusted to a comfortable angle .
- 【durable material】the ohlpro brand adheres to the concepts of excellent design and environmental protection. this ipad tripod mount adopts high-quality craftsmanship and user-friendly design, which can bring you a feeling of quick installation, durability and long-lasting.(package includes: a tablet clamp, ball head bracket, not included tripod)
SHOWview product -
Product Highlights
- Mini ball head with knob supports multi-angle adjustment and quick switch between vertical shooting and horizontal shooting.equipped with 1/4 screw, the removable quick release plate is suitable for slr cameras. 1/4" screw hole at the bottom can be attached to tripod or monopod
- Acuvar universal/adjustable tablet tripod mount adapter fits any tablet/large phone (tablet) with 5.5" to 9.7" inch screens.
- Upgrade version - tripod ball head is added: metal joint ball pivot ensures 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography. no worry about clamping the tablet only in portrait position. our tripod mount with the adjustable ball head allows your tablet to set horizontally and vertically, which virtually means any adjustm...
- Extremely quick release mount allows you to remove or replace your camera instead of screwing each time. it is easy to set up and take down your camera; note: camera and tripod are not included.
- Universal tablet tripod mount: fit most tablets with 5” to 7.9” screen and 0.7” thickness (including tablet case), such as mini 2/3/4/5, pro 9.7/10.5/11, air 1/2/3 etc. note: not compatible with pro 12.9. please carefully check the size of your device before purchase.
SHOWview product
Coupon copied
