7 Best
Test Ethernet Cables
-
Product Highlights- Please note. before you use the product to test or track cables, please make sure that the wires are in low-electricity or power-off condition(maximum currents for emitter and receiver are 10ma and 30ma respectively, and the maximum voltage is 24 v ), otherwise the item will get damaged. besides, you may need two 9v laminated cell, which are not included in the packagin...
SHOWview product -
Product Highlights
- 【poe testing function】 can be used for testing standard and non-standard poe device, can also test poe voltage, power supply polarity and power supply mode.
- 【lcd screen】 adopt lcd intuitive display screen for you to see the data more clearly, and with three modes for you to switch freely: poe mode, digital mode and analogs mode. led flashlight function can use it normally in a dark environment.
- 【transmitter & receiver】the transmitter comes with rj45 port and poe port. the poe port only tests the voltage of the poe device. this network cable tester support test network cable cat5, cat5e, cat 6, cat 7, cat 8, rj11 telephone line and other metal wires. please turn the receiver to the maximum sound when cable tracing.
- 【network cable tester】 wire tracker can quickly find the required line pairs among numerous ones. ethernet cable tester is adaptable to network cable rj45 terminal, telephone line rj11 terminal. network tester can test other metal wires via an adapter.
- 【network cable collation】lan tester tests physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection. use the transmitter only to test the status of working telephone lines.
- 【voltage test function】you can click "v" to enter the voltage test function, which can measure the battery voltage and voltage polarity and you can press "v" again to enter the poe test mode. you can measure the poe power supply line and voltage. and can be hunt in the presence of voltage. (less than 60v)
SHOWview product -
Product Highlights
- ▲wire tracker - the line finder can trace not only ethernet lan wires, but also electrical and speaker wires when connecting to the alligator clip; in this situation, the wires must be in power-off status, otherwise the units will be damaged; it is recommended to stripe down some of the wires when connecting through the clip; select "scan"; emitter works properly if the...
- ▲earphones design - with a pair of earphone, you can just connect the earphone to the headset jack of receive to get clear information in a noise environment, adjust the volume knob to make the volume proper and avoid being interfered. notice that if the sound is low, you should check whether the battery is powered off or not, and the led flashlight allows operation in ...
- ▲wire tracing multifunction - fast to locate the breakpoint without wire's cover damage, find wire on all types of connected operating ethernet switch /router/pc terminal. perfect for tracking rj11, rj45, cables or other metal wire (via adapter)；and also with the battery（10v-110v） positive and negative measurements function.
- ▲network & telephone line test - the line finder testes physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection; use the emitter to test the status of working of telephone lines (such as judging tip or ring line), test the line level, positive and negative polarity detection; adjust the volume of receiver by pr...
- ▲24-month warranty and you will get: 1x emitter with double rj11 rj45 interface, 1x receiver with bnc interface,1x pair of earphone ,1x rj11 clip adapter cable,1x rj45 cable,1x storage box,1x english user manual , battery not included.
SHOWview product -
Product Highlights
- Cable state testing (2-wire): line dc detecting, anode and cathode determination,ringing signal detecting open, short and cross circuit testing
- Connectors: ethernet cat 5, ethernet cat 5e, ethernet cat 6, ethernet cat 7, rj11 6p and rj45 8p
- Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs. visible led status display.
- Cable type: rj11 telephone cable and rj45 lan cable
- Power source: dc9v battery required (not included)
SHOWview product -
Product Highlights
- 【three wire tracking modes】the network cable tester comes with three modes for you to choose from: poe mode, digital mode and analogs mode.it is more convenient for you to choose the cable scanning mode according to your demand.
- 【voltage test function】network cable tester has a voltage test function. you can click on "v" to access the voltage test function, which measures the battery voltage and voltage polarity.press "v" again to enter poe test mode. this mode allows you to measure poe power lines and voltages. and it can be used to measure in the presence of voltage(less than 60v)
- 【wire tracking】network cable tester can find network cable or poe cable you required among many others. and it is suitable for network cable rj45 terminal, telephone line rj11 terminal.the sensitivity can be freely adjusted.
- 【poe testing function】network cable tester can be used for testing standard and non-standard poe device, but also test poe voltage, power supply polarity and power supply mode.
- 【lcd screen & sound adjustable】network cable tester are equipped with an lcd screen and led flashlight, allowing you to work in dark environments. with the sound adjustment knob, you can freely adjust the sound level.
SHOWview product -
Product Highlights
- Tests cat3, cat5e and cat6/6a cables
- Test remote stores securely in tester body
- Auto power-off feature to conserve battery life (9v included)
- Cable tester with single button testing of rj11, rj12 and rj45 terminated voice and data cables
- Fast led responses indicate cable status (pass, miswire, open-fault, short-fault, and shield)
- Compact tester easily fits in your pocket
SHOWview product -
Product Highlights
- All-in-one rj45 pass through crimp tool: a professional rj45 crimper that can easily cut, strip, and crimp cat5, cat5e and cat6/6a cables. even if you are a beginner, you can also quickly complete the installation according to our user's manual
- Multi-function phone/ethernet cable tester: automatically tests the continuity, open, and short of twisted pair data wiring (rj45/rj11/rj12 ) connections. power by one dc9v battery (9v battery not included)
- Quality assurance: 100% satisfaction or money-back guarantee. any questions or demands about our network tool kit within 18 months, please feel free to contact us for the most satisfactory solution
- Rj45 crimp tool kit: ethernet crimper tool for 6p/8p pass through cat6, cat6a, cat5 and cat5e connectors plugs, suitable for 23awg-28awg cable
- The pass through technology significantly improves work efficiency and has100% succses rate, fast and reliable
- Packaging: user's manual, ethernet crimper tool, network/phone cable tester, mini wire stripper, 50pcs cat6 pass through connectors, 50pcs covers and free spare blades(crimping blade and stripping blade)
SHOWview product
Coupon copied
