10 Best
Sump Pump Switches
-
Product Highlights- Quick installation: this vertical float switch comes completely assembled and ready to mount on the pump discharge pipe for easy and quick installation. the pumpspy sump pump vertical float switch is a universal replacement for sump, sewage, and effluent applications. it comes with a 10' long power cord with a piggyback plug, mounting bracket, and stainless steel hose c...
- Durable: we use gold-plated electrical contacts to keep the vertical sump pump float switch more resistant to pitting and wear. advanced material technology helps reduce buildup on the switch, allowing it to operate freely without sticking.
- Reliability: a cycle can be defined as the vertical float switch turning the sump pump on/off, depending on whether the water level reaches the upper and lower switch point. when the water level rises, the float switch activates and turns on the sump pump to pump water out. our sump pump switch is rated for up to one (1) million cycles.
- Automatic pump operation: with a vertical float switch installed, the sump pump automatically turns on and off, draining the sump basin as needed. when float switches are fully functional, no manual activation is required, and water is pumped out of the sump pit completely hands-free. 10 amps @ 120vac - normally open.
- About us: pumpspy provides sump pump systems that help eliminate the unknowns of a sump outage and prevents costly damage. we offer smart sump pump systems that automatically track incoming data and check that a sump pump is working correctly.
SHOWview product -
Product Highlights
- Hi-lo dual sensors: the hi-lo sensors uses a highly patented water level detection method, which keeps the electrode intact for 10 years. it is made of 304 stainless steel and is not affected by mineral or water debris. it has strong corrosion resistance and never needs to be cleaned. the height of two sensors is adjustable, you can decrease how often the pump turns on/...
- Overload & pump failure alarm: when the pump power is greater than 23a, overload protection will be activated to protect your safety. the built-in alarms will notify you in the event of pump failure, a blocked discharge pipe, and other potential issues. you can turn off the alarm function briefly after hearing the alarm sound (only within 24 hours)
- New generation: on the basis of the drain mode, our ortis water level controller has added a water mode and 3 load running mode for you to choose, you can manully select the load running mode according to your needs. the values are clearly displayed with led indicators, easier to check and set for you
- Safe & stable: the ortis pump controller effectively addresses the limitations associated with traditional mechanical float switches, which are susceptible to mechanical failures. with a compact design and extended lifespan, this controller eliminates the need for moving parts in the pit, ensuring heightened reliability. it finds application in diverse scenarios, delive...
- Compatibility: compatible with all sump pump and utility pump applications (>2hp, 20a). it can replace any existing float switch, fits in narrow or crowded pits. easy to install, doesn't require any changes to your plumbing. perfect for sewage pits, fish tank ,water towers, etc
SHOWview product -
Product Highlights
- Wide application: this portable tool is a versatile, reliable float switch that can be used with sump, sewage, or effluent pumps. it is intended to be installed in the sump or sump pipe and is an excellent choice if you want to add an extra layer of safety or a backup float switch to your pump system.
- Easy installation: our tether float switch for a sump pump comes with everything you need for a quick installation. it includes a hose clip and a cable grip for easy adjustment. this switch is simple to install by attaching to the pump's discharge line or directly to the pump. we also have technical support staff in the united states who can help you with your needs.
- High-performance float switch: designed for maximum dependability, pumpspy's tether float switch is made of gold-plated electrical connections that are well resistant to accelerated pitting and wear. it detects changes in the water level and activates its automatic on/off function. 10 amps @ 120vac - normally open.
- Universal replacement: don't let your float switch fail when you need it the most! this universal replacement float switch is exactly what you need to activate your water pump. the float switch has a modular design and a 20-foot cord providing plenty of flexibility, while the piggyback plug ensures safe and efficient power utilization.
- Pumpspy promise: pumpspy products are proudly made and assembled in kalamazoo, michigan. we employ patented, proprietary technology to help with your sump pump 24 hours a day, seven days a week. we are committed to consistently enhancing our goods, delivering quality and dependability, and providing our customers with peace of mind.
SHOWview product -
Product Highlights
- Ruggedly constructed of non-corrosive polypropylene and pvc-jacketed wires, ip68-rated sludge boss sewage pump switch floats withstand non-combustible fluids in temperatures from 32°f to 140°f.
- Honeywell micro switch built into sludge boss sewer pump tank floats is rated for 1,000,000 operations. confidently control effluent and wastewater levels in large water tanks, reservoirs, and sumps.
- The sludgeboss float switch is rated to directly control motors of up to ½ horsepower (or 13 amps) at 120 or 220 volts ac for non-continuous pump operations, and up to 13 amps for 12v dc motor loads. manage wastewater levels with sludge boss septic tank floats. these float switches work with your sewage pump to detect the levels of viscous liquids and suspended solids i...
- Self-orienting design makes installation hassle-free with no tether or cable weight needed. available in 16-, 20-, 33- and 100-foot lengths, sludge boss is compatible with many sewage pump systems.
- Mercury-free and iec and ce rated sludge boss hold tank float switches are non-toxic and environmentally friendly. they are suitable for use with septic tank pumps up to 1/2 hp at 120 volts or 220 volts.
SHOWview product -
Product Highlights
- Limitations: 0.5 hp, 13 amp maxumim pump run current; 85 amp maximum pump start current; use only with pumps equipped with integral thermal overload protection
- Temperature rating: maximum liquid temperature 140 degrees f
- Applications: water resistant pump down tethered float switch for sump, sewage, effluent systems, ponds or utility pumps; allows pumps to start/stop automatically; adjustable
- Cord length: 15-foot cord with piggyback plug; pumping range 7 inches to 36 inches
- Listings: ur, csa listed in the usa; made in usa
SHOWview product -
Product Highlights
- With adjustable position dual float switch, you can turn on/turn off your pump levels from 1/2'' to 20' effectively and precisely according to your actual needs, extends your pump life
- Briidea pump controller can completely overcome the shortcomings of the traditional mechanical float switch which is prone to mechanical failure. long life and small size,no moving parts in pit ensures reliability and is used in various application scenarios, stable and safe
- Compatible with all sump pump and utility pump(<1hp) applications! energy-saving, long-lasting and easy to install
- The dual float switch sensor is made of 304 stainless steel and is not affected by mineral or water debris. it has strong corrosion resistance and never needs to be cleaned
- With smart button design, you can manually turn your pump on or off when needed! sounds an alarm when pump is not working correctly，helps prevent water damage
SHOWview product -
Product Highlights
- 🔺【manual mode】if the water level is not high enough to start with auto mode or you want to remove water as lower as possible (0.5"), you can switch to manual control. pump will keep continuously running and will not turn off automatically, so remember to cut off the power immediately to prevent the motor becoming burned!
- 💪【safety ensure & durable】upgraded sealing structure gives pump longer durability, which is much longer than regular mechanical seal. full corrosion-resistant shell and thermal protection ensures the pump will not be burned out, even when the pump triggers thermal overload protector, the pump will rework after cooling down.
- 💪【widely application】pump also comes with a 16.4ft long cable cord and a 26 ft nylon rope, which allows the pump to submerge deep enough in the water. ideal for heavy-duty draining applications including pools, ponds, pits, wells, ditches, basements, etc.
- 🔻【automatic mode】once the sump pump is plugged in, it will automatically start when the water level is above 4", and shut off when reaching the stop-level of 2". when you start to use this pump, tilt and submerge the pump into water for a few seconds to expel the air inside of the pump.
- 💪【powerful & reliable performance】1/2hp powerful motor ensures effective pumping. the pump has a maximum capacity of transferring water up to 2500 gph with 1.25" discharge hose horizontally. it can lift water up to max. 26 ft vertical. this submersible pump works with clean water or slightly dirty water, and its bottom grid allows it to pass max. 0.2" solids.
- 💪【easy installation】comes with three plastic adapters: ght 3/4"+npt 1" connects standard garden hose for quick installation; g1.25" discharge port connects discharge hose for high capacity pumping.
SHOWview product -
Product Highlights
- 13 ft cord with nema 5-15 standard us plug (does not include counter weight.)
- Features a reliable high quality german-made cherry brand switch.
- Fill function. ip68 rating. polypropylene plastic casing, neoprene rubber cord.
- 16 amp max. works on most 1/2 hp or smaller pumps.
- 5 year guarantee against any manufacturing defects. 1 year no-questions-asked return policy.
SHOWview product -
Product Highlights
- Easy installation: equipped with a piggyback plug for easy installation; plug the pump's plug into the back of the switch plug and plug the switch into the wall outlet
- On/off level: pump activates when water reaches 8 inches and shuts off when water falls to 2-inches; override automatic operation by plugging pump directly to wall outlet
- Applications: converts manual pumps up to 15 amps (running) and up to 1/2 hp to automatic operation; ideal for sump pumps; csa listed in the usa; 10-ft. cord
- Compact design: designed to fit confined spaces such as narrow sump pits or basins, 5 gallon pails and other small spaces; 3.031 inches x 1.7 inches x 4.75 inches high
- Specifications: 10-foot power cord; 115-volt; maximum 15 amps (running), 1/2 hp; csa listed in the usa; 3.031 inches x 1.7 inches x 4.75 inches high
SHOWview product -
Product Highlights
- Multi outlet sizes: 2 different diameters outlets ( ght3/4", npt1-1/4") can be changed depending on the flow rate to maximize efficiency. the bigger the flow is, the wider the outlet should be.
- High-quality materials: submersible pump is made of high-quality thermoplastic composite material, which is highly rugged and corrosion resistant. designed and manufactured in line with the valid safety requirements, lower noise and energy-efficient.
- Powerful sump pump: 400 w, 1/2 hp motor. max lift: 16 feet; 1981 gallon per hour rating tackles any draining job in no time. this submersible water pump easily passes solids up to 20mm in diameter. great for garden ponds, swimming pool, cellars and flooded area.
- Auto float switch: start/stop automatically. when water level is below 4.7 inch, the pump will automatically disconnect the power; when water level rises above 4.7 inch, the sump pump submersible will start again. cut off immediately when pump fails to pump water to prevent the coil from getting burned.
- Ingenious design: this water pump features a higher base plate which assures the prevention of debris collection in the sump pit. built-in thermal overload protection ensures the utility pump operates within spec for longer durability.
SHOWview product
Coupon copied
