10 Best
Suction Cup Pads
-
-
Product Highlights
- Shape: the suction cup pad is rectangular and single- sided design with 24 suction cups.
- Installation: you can stick this suction pad on the phone case, and you can place your phone on any surface that can absorb smoothly, such as glass, mirror, table, car dashboard, etc. ( try not to stick it directly on the phone )
- Material: made of silicone material, plus self- adhesive on one side, it can your phone from falling off.
- Performance: the suction cup provides you with great installation possibilities without adding any scratches to your device, and at the same time you can take off the phone at any time and put it in another location without leaving any traces.
- Application: silicone suction cup pads are compatible with most mobile phones and other devices, as long as the surface is smooth, it can be attached.
SHOWview product -
Product Highlights
- Easy to use: the sticky pad can be used to replace screws, drilling, welding and other fixing methods. fixing with double-sided tape can make the wall not damaged, the installation is simpler, and the disassembly is convenient.
- Multiple use: these double sided circle adhesive pads can be used for mounting dashboard phone holders,gps,dash cam, hooks, nameplates, dashboard toys,windshield car mount,etc.
- What you get: diameter3.15inch x 6pcs round double sided adhesive pads, (you can cut the pads to the size or shape you want if needed.
- High quality viscose：made of strong adhesive, it can help the suction cup to be installed on the surface tightly, with waterproof and high temperature resistance.
- Note: after sticking, it is best to press again for about 20-60 seconds to make full contact between the adhesive pad and the surface and to maintain lasting adhesion for a better bonding effect.
SHOWview product -
Product Highlights
- Use for sticking on dashboard before installing the car mount.
- What to note: please don't touch the adhesive with your finger. select a certain place to instal, then don't move again.
- Material: whole body hard plastic, high quality adhesive on the bottom
- Why use it: due to some material of the dash is not friendly with the suction cup. stick this pc pad first, it will help the suction cup stand on the dash more stable.
- Email us any time when need help. we will always online to help you solve any questions.
SHOWview product -
Product Highlights
- ✅high bond stickiness & heat resistant,the adherence of durable 2-sided tacky circular waterproof long-lasting bond adhesive dot is 40% stronger than ordinary double stick glue, fastened your adjustable cell phone mount steady in bumpy roads.
- ✅premium adhesive,very high bond sticky pads,once you stick to the surface,and please wait for 30 seconds and then take off the other side red cover.the surface will be perfect.
- ✅sticky pads for suction cup mount ] 8 pcs 70mm double-sided stickers designed to fixate perfectly for dashborad mount, gps navigation,car dvr home sution hooks.
- ✅easy to use & tearable,this 8 pcs d.sking 2 sides stuck tape replacement kit is easy to apply, just peel off old adhesive lid stickies part from suction-cup or socket backed, clean surface with rubbing alcohol swab, then tear off adhesive layer
- ✅what you will get,8 pieces 2.76” double-sided stickers,we provide a 30 day money back warranty and if you need any help with our dual sided ex large anti-heat sticky stuff set auxiliary sticker to repair car windshield-mounted patch holder, please feel free to contact us and we will offer you our best after-sales service.
SHOWview product -
Product Highlights
- ✅high bond stickiness & heat resistant,the adherence of durable 2-sided tacky circular waterproof long-lasting bond adhesive dot is 40% stronger than ordinary double stick glue, fastened your adjustable cell phone mount steady in bumpy roads.
- ✅premium adhesive,very high bond sticky pads,once you stick to the surface,and please wait for 30 seconds and then take off the other side red cover.the surface will be perfect.
- ✅sticky pads for suction cup mount ] 8 pcs 80mm double-sided stickers designed to fixate perfectly for dashborad mount, gps navigation,car dvr home sution hooks.
- ✅easy to use & tearable,this 8 pcs d.sking 2 sides stuck tape replacement kit is easy to apply, just peel off old adhesive lid stickies part from suction-cup or socket backed, clean surface with rubbing alcohol swab, then tear off adhesive layer
- ✅what you will get,8 pieces 3.15” double-sided stickers,we provide a 30 day money back warranty and if you need any help with our dual sided ex large anti-heat sticky stuff set auxiliary sticker to repair car windshield-mounted patch holder, please feel free to contact us and we will offer you our best after-sales service.
SHOWview product -
Product Highlights
- 3m pe foam adhesive at the bottom can be fixed on textured surfaces.
- No tools required for installation.
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- Has a diameter of around 2.76 inches, applicable to most suction cup gps/mobile holders on the market.
- Buy with confidence as every apps2car product comes with one-year warranty.
SHOWview product -
Product Highlights
- Wide compatibility: could be applied to the smartphone mount, car camera, gps suction mount and more. it performs perfect at any seasons. heat-resistant and moisture-resistant. it could adhere to vertical surfaces, soft-touch dashboards and windshields.
- Easy to install: ensure the contact surface clean and dry. put the pad on the flat surface. tear off the protective film on the base of the disk. press it down hardly for 30 to 60 seconds, to gain the maximum adhesive between the disk pad and contact surface. please wait for 48 hours to install the suction cup holder.
- Premium material: made of abs plate and strong adhesive, durable and for long time use. diameter: 9.5cm /3.74 inch. upper part abs plate provides smooth and flat surface. the bottom strong sticky pe foam adhesive fixed dashboard textured surface.
- Tips: the aywfey adhesive mounting disk only works with any 95mm/3.74 inch or smaller than 95mm/3.74inch suction cup holder pedestal accessories.please do not touch the adhesive with your finger. select a ensure place to adhere and install, then do not move it again.
- Packing list: 4 x adhesive dashboard mount disc in 95mm diameter. no more worried the phone holders or gps accessories dropping during driving. if you use the sticky pad, it could prevent you frequently pick up the suction cup from the dashboard while damaging your car as the time gone, and protects your car from damage.
SHOWview product -
Product Highlights
- ✔heat resistant disk - select high-bond sticky adhesive ( affixed to the bottom of the plastic disc ), whose stickiness is 40% stronger than ordinary ones. heat resistant adhesive on the back of the dashboard sticky disc support 120℃ high temperature, higher than other adhesive for auto phone holder. dashboard adhesive disc performs perfectly at outside temps. attention...
- ✔easy to use - dash suction cup mount plate is suitable for flat / slight textured surface of vehicle, not fit distinctly arced or bumpy surface. installation is simple: clean, dry, affix disk, add weight, and wait. after you fix sticky disc, it's important to wait for 24 hours before applying suction item. adhesive is not reusable or movable, so please install a new mo...
- ✔universal suction cup mounting disk - pop-tech dashboard pad mounting disk is designed for suction cup base, handle the fall off of suckers effectively. adhesive mounting disk has wide compatibility -- any suction cup cell phone mount and accessories within 75mm in diameter: most automotive suction cup phone stand, windshield long arm mount, gps mount, tablet computer ...
- ✔strong sticky adhesive- seperate 2 super sticky adhesives are flexible options for your suction cup phone mount devices and other occassions. you can stick the new 3m vhb double side tape directly on the suction cup. strong viscosity can hold securely for heavy duty mount. also applicable for glass, ceramic these smooth material. thanks to premium strong adhesion adhes...
- ✔package content & 100% satisfactory service - 1 x 75mm ( 2.95" ) dashboard pad mounting disk, 2 x 70mm (2.76") 3m adhesive stickers, 1 x user manual. pop-tech provide 12-month no-worry service and lifetime technical support. please do not hesitate to contact us if you have any questions and our customer service team is stand by 24 hours of the day to solve your problem...
SHOWview product -
Product Highlights
- ✅【used for various suction cup holder mount】 exclusively designed for diameter of 3.15 inch (80 mm) suction disk mounting plastic plate, compatible with dashboard & dash cam holder. let your hands free.
- ✅【easy installation】 simple several installation steps can be easily completed. it can be easily removed and wiped, leaving no residue on the surface.
- ✅【high temperature resistance】 selection of high-quality genuine 3m adhesive pad, double-sided self-adhesive, provides strong and durable support, high/low temperature resistant, stronger than ordinary glue patches.
- ✅【application wide range】 suitable for wiped surface & flat, and some textured or wet surfaces, even in the kitchen. dual suded round adhesive works on the dashboard, windshield, metal, suitable for dashboard suction cup phone holder, handsoaps dudel dispenser, imac screen . widely applicable. you can also cut it to fit the size of your small device.
- ✅【100% satisfactory service】 we provide 12-month warranty and lifetime technical support for best after-sale service. please do not hesitate to contact us if you have any questions about our suction cup adhesive and our customer service team is stand by 24 hours of the day to solve your problems. all we want is your satisfaction.
SHOWview product -
Product Highlights
- 2.[ genuine 3m heat resistant tile semi permanent sticky adhesive sheeting disc replacement ]the high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet...
- 4.[ easy to use ]: this large circle 2 sides refill adhesion tape replacement kit comes with cleaning pads to clean the surfaces before applying. just peel off the old adhesive stickly dots gel from mount and clean the the surface with cleaning pad first, when the surface is dried, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket direct...
- 1.[ designed for suction cup mount] volport 3m round flat adhesive stickers fit for dashboard suction cup mount cradle,make your sucker stronger.it is also compatible with dash cam, gps, car cell phone mount, ipad, tablet holder, soap dispenser, bathroom shower caddy / head /shelf /rod/, suction adhesive base/car clips, dashboard pad mounting disk, hook, towel rack/ring...
- 3.[ very high bond stickiness ]: the adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. this 3m double face strength sticky part big adhesive backing dot is also waterproof. multipurpose tearable tacky double sided gripping fixate anti gravity gel strips patches pad for r...
- 5.[ package includes ]: 4 x 3.15 inch wide (80mm diameter)3m heavy duty removable heat proof small double-stick sticky padded both side backed mat tape, 4 x cleaning pad ,1 x user guide. we provide a one-year warranty and if you need any help with our product, please feel free to contact us and we will offer you our best after-sales service. your satisfaction is our pri...
SHOWview product
Coupon copied
