10 Best
Solenoid Valves
-
Product Highlights- 【performance】connect to dc 12v voltage and rated current is 300ma to ensure a stable performance
- 【application】suitable for use with pipelines in water applications, and water temperature is 0~55
- 【normally close valve】this is a normally close type electric solenoid valve, power on to open it and power off to close it
- 【brass solenoid valve 】the high quality brass valve body would hold a pressure up to 0.8mpa
- 【tips】there is an arrow sign on valve showing flow direction, please follow the sign to connect pipes
SHOWview product -
Product Highlights
- The high quality brass valve body would hold a press up to maximum 10kgf/cm²
- Pt3/4 thread size is widely used and would be connected to many pipelines
- This is a normally close type electric solenoid valve, power on to open it and power off to close it
- Suitable for use with pipelines in water, air, oil and low viscosity non-corrosive fluid applications
- Compact size and durable, it would be a great replacement for your broken or old ones
SHOWview product -
Product Highlights
- Adjustable water flow valve: the humidifier solenoid valve can control the amount of water entering the humidifier so that proper humidity can be maintained throughout the home.
- Note: the reasons for water leakage after the valve is installed: (1) the installation accessories are not tightened, and waterproof tape is required (the product comes with it, no need to buy it); (2) the valve is installed in the wrong direction; if you encounter problems during the installation process, please contact us promptly
- The humidifier maybe makes noise solution: open the back cover of the humidifier and remove the small fan, then add some lubricating oil, or replace it with a new small fan
- Replacement: humidifier solenoid valve is used to replace oem solenoid valve.the joint is made of solid brass material, solid and not easy to rust.
- Simple installation: the product includes a compression nut, which can be repaired with just a screwdriver and a wrench, and the installation is simple and convenient. note: during installation, be sure to align and tighten the screw thread of the connection to prevent water leakage.
- Compatibility: compatible brands: replacement for aprilaire, replacement for honeywell, replacement for generalaire and most famous brands. applicable models: replacement for he220, replacement for he225, replacement for he260, replacement for he265, etc.; replacement part numbers: replacement for aprilaire -4040, replacement for general - 990-53, replacement for honeyw...
SHOWview product -
Product Highlights
- [size]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' npt thread, flow diameter: 16mm (0.63 '')
- [wide application]: applicable temperature: - 5 ℃ ~ 80 ℃,working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,working environment: air, water, oil and gas
- [material]: the product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve
- [n/c]: the solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use.
- [matters needing attention]: amps power required by adaptor: at least 1.2a. as the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. if more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before w...
SHOWview product -
Product Highlights
- ✅【specific details】: its voltage is 24 volt, 3.5 gallons per hour, which can help regulate the flow of water into your humidifier
- ✅【easy to install】 :the solenoid is easy to install, a wrench and a water container can help you accomplish installation
- ✅【perfect fit】: tomoon 990-53 water solenoid valve （also known as part 7014 and 990-46））fits most type of humidifier-1040, 1040l, 1040lh, 1040r, 1042, 1042dm, 1042l, 1042lh, 1042wsc, 1137, 709, 709l, 709lh
- ✅【durable material】: the solenoid is made of solid brass material, durable and sturdy, well-tested by the manufacturer.non original aftermarket part. fits oem standards!
- ✅【buy with confidence 】for any reason you're not completely satisfied, you can ask for a replacement or full refund. if you are not sure whether this solenoid valve assembly correctly fit you, please feel free to contact us or ask a question through amazon
SHOWview product -
-
Product Highlights
- [important role]: the role of the automotive carbon tank solenoid valve is a device installed on the vehicle to reduce air pollution caused by fuel evaporation emissions and increase fuel efficiency. when the car starts, the solenoid valve is opened to release the absorbed fuel steam into the intake pipe and into the engine for combustion, and the carbon tank is the mos...
- [oem part number]: the oem part number of vapor canister purge valve solenoid is 2891026900, 28910-26900, 911-808. please carefully make sure the oem part number before you buying.
- [high quality material]: this emission purge valve is made of high-grade abs plastic, very hard, with good durability, wear resistance, corrosion resistance, waterproof performance, you can use for a long time.
- [scope of application]: this canister purge solenoid is suitable for hyundai accent elantra genesis equus kia rio rio5 soul borrego. for the specific model, refer to the product description please.
- [package contents]: the package includes 1 x vapor canister emission purge valves solenoid.
SHOWview product -
Product Highlights
- Normally closed type: the solenoid valve is normally closed, thread: g1/2; applicable fluid temperature: 0-55℃, minimum working pressure: 0.02mpa, maximum working pressure: 0.8mpa
- Pressure solenoid valve: pressure is suitable for 0.02～0.8mpa water pressure, and no pressure is suitable for 0～0.2mpa water pressure. if the solenoid valve is not used in the normal pressure range, it will not work normally! generally speaking, pressure is used for tap water, and pressureless is used for water tanks, water towers and similar containers.
- High-quality materials: the solenoid valve is made of high-quality plastic and brass materials, with long service life, rated voltage: dc12v dc12v, rated current: 12v-300ma
- Flow direction: one-way, water inlet interface: g1/2 male thread, water outlet interface: g1/2 male thread. the solenoid water valve is easy to install and easy to use.
- Multiple applications: this solenoid valve is suitable for water appliances such as water purifiers, water purifiers, drinking fountains, and direct drinking fountains. it has a wide range of applications and good performance stability.
SHOWview product -
More Deals
-
Product Highlights
- This valve was manufactured with a viton seal. viton is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- Please note: this valve is not a continuous duty valve and should not be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. if you need a continuous duty valve for your project please search for our u.s. solid motorized ball valves.
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. due to the chemical composition of brass, this valve should not be used with projects involving drinking water or other water projects.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. also, our u.s. solid engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- As with all u.s. solid products, this valve comes with a one year warranty. if the valve does become defective within the first year of purchase, u.s. solid will gladly replace it.
SHOWview product
Coupon copied
