10 Best
Solar Mounting Systems
-
Product Highlights- Hole diameter: 8mm/0.31 inch; thickness: 6mm/0.24 inch; mount hole size: 28.5mm x 8.5mm/1.12 inch x 0.33 inch; bracket size: 40mm x 36.5mm x 80mm/1.57 inch x 1.44 inch x 3.15 inch(l*w*h).
- The brackets are designed for an easy mount, you only need to install it in the target position, save your time and energy, which is convenient for you to install.
- These solar panel mounting brackets are made of aluminum alloy with a compact structure, the surface is produced by fine manufacturing technology, not easy to rust or corrosion so that they can serve you for a long time.
- These corrosion-resistant aluminum alloy mounts are lighter but stronger, support solar panels better, have no burden on the roof, and can make the connection between the panel firmly.
- All size is measured manually, please allow +/-0.1 inches error.
SHOWview product -
Product Highlights
- Working principle: this part is made up of thunder protection grounding pins and stainless steel screws. when the screw is locked, the spike on the thunder protection grounding will pierce the anodized layer of the aluminum guide or any other conductive metal structure look, so that the metal structure that can contact each other forms an air tight electrostatic connect...
- 10pcs in total: the package contain a total of 10pcs grounding clip, enough for you to replace and use, very convenient
- Compatible equipment: compatible with all kinds of aluminum photovoltaic guide rail(roof, ground, shed), c steel, u steel and h channel steel, etc.
- Thunder protection component: this product is a thunder protection grounding component that collects the static electricity from photovoltaic modules and photovoltaic support and leads to the ground through a grounding copper cable
- Quick installation: easy to install, no need for many tools, allows a variety of ground conduction installation
SHOWview product -
Product Highlights
- [ easy install ] - quick assembly with stainless steel fasteners and precise hole placement.
- [ suitable for ] - compatible with eco-worthy solar panels under than 160w.
- [ application ] - adjustable solar panel mounting brackets designed for off-grid solar systems, like rv, marine, motorhome, roofs, sheds, etc.
- [ efficiency ] - gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead of laying them flat.
- [ the length ] - 375*712*712mm(14.76"x28.03"x28.03")
SHOWview product -
Product Highlights
- 【rust proof materials, including necessary accessories and tools】the rails, l foot, adjustable end clamps, adjustable mid clamps are made of high quality aluminum (not sharp),perfectly supporting solar panels in off grid installation. one l spanner is included in the package for tightening or loosening clamps easily.
- 【considerate accessory assortment】the package includes 4 rails, 4 l feet, 2 adjustable solar mid clamps, 4 adjustable solar end clamps, necessary bolts and nuts, one useful l spanner, two rail splices. installation becomes easy and efficient.
- 【an easy set-up solar panel roof mounting bracket kit for sloped tin roof】specially designed to vertically mount one or two solar panels within 76cm long because of the rail length 76cm/29.9 inch. you can extend the rail length by rail splice included in the package. if you need to mount more solar panels, please add the kit quantities as you like. it can also be used t...
- 【adjustable solar mid clamps and end clamps】the solar mid clamps and end clamps are adjustable for fixing solar panels 30-45mm thick, flexibly clamping the panels on rails firmly.
- 【including wood screws and self-tapping screws】both wood screws and self-tapping screws are included in the package. please choose according to your wood beam or steel beam. this kit is suitable for mounting solar panels onto tin roofs, very helpful in increasing solar power output, capable of withstanding weather conditions, such as high winds or heavy snow loads. we o...
SHOWview product -
Product Highlights
- 【complete kit】 10pcs 30mm(1.18")/35mm(1.38") solar panel end clamps set, including complete accessories for installation (10* m8*25mm/0.98" fixing screws, 10* nuts, 1* wrench). set of 10, the quantity is enough to meet your daily use and replacement needs.
- 【easy installation】 photovoltaic solar module mounting clips have pre-drilled mounting holes on the surface and including groove nuts and screw. the connection between each solar module panel can be easily realized. easy to install, save time and labor cost.
- 【permium material, durable & long lasting】 anbte solar panel mounting end clamp are made of aluminum alloy, which with light weight, large load capacity and strong corrosion resistance, suitable for a variety of outdoor environments. and the mounting screws are made of 304 stainless steel, which has the advantages of rust resistance.
- 【innovative two-hole end clamp】 the z-shaped end clamp is divided into long end and short end, and 2 fixing holes are pre-drilled. choose the shorter side of the end clip for mounting solar panels with a thickness of 30 mm(1.18"), and choose the longer side of the end clip for mounting solar panels with a thickness of 35 mm(1.38").
- 【wide applications】suitable for most home, rv and marine solar panel installations, you can install solar panels on flat and pitched roofs made of tiles, asphalt shingles, ceramic tiles, slab shingles and standing seam boards. provides toughness to withstand extreme weather conditions.
SHOWview product -
Product Highlights
- Easy installation: these solar panel clip to create a strong connection between the panels, you just need to install them at the location, saving installation for time and effort.
- Package contents: the package contains 10 solar panel clips, the number is enough to meet your daily use and replacement needs, bringing you a of convenience.
- Purpose: these aluminum solar panel mid clips are designed to fasten the panels to the rails, making a strong connection between the panels.
- Wide applicability: suitable for most solar panel installations on rvs, houses and boats, with strong toughness and resistance to withstand extreme weather.
SHOWview product -
Product Highlights
- Main purpose: these solar panel clamps are designed to connect the panels to the rails and quickly mount solar pv modules on different tile surfaces.
- Wide application: used for the installation of most solar panels in rvs, houses and ships, can be installed on the roof consisting of bricks and asphalt tiles.
- Firm connection: these solar bracket clips are of special z shape, firmly connected between the panels, convenient to install, time and labor saving.
- Aluminium alloy: these clamps are made of aluminum alloy al6005 t5, with anodized surface, corrosion resistance, wear resistance and long service life.
- 10pcs in 1 set: including 10pcs aluminum solar panel clamps, small and compact, with sufficient quantity for easy installation and replacement.
SHOWview product -
Product Highlights
- Durable: the solar pv bracket front foot are made of aluminium alloy with anodised surface for high corrosion resistance and easy installation.
- Safe to use: the pv support legs are load bearing, wind, shock and water resistant, ensuring safety and reliability, can bring you more convenience.
- Easy installation: the simple on site installation process effectively improves the efficiency of on site installation and saves time and labour costs for pv system installation projects.
- Simple structure: the compact shape, simple structure and high mechanical strength of the solar panel support legs greatly facilitate the assembly of connectors during outdoor installation.
- Wide application: the pv mounting feet are suitable for very harsh installation environments and are widely used for the installation of roof mounted pv systems in different configurations.
SHOWview product -
Product Highlights
- Easy to install: the solar panel z brackets are pre-drilled holes in the surface, and the provided bolts and washers can be used to easily install. with the use of our organic silicone water with excellent performance, the effect is better. easy to install and remove.
- Widely application: as the most widely used solar mount, our z mounting brackets can be used in rvs, roofs, grounds, yachts, boats, cabins and any other flat surface. it is the best choice for off-grid system brackets.
- High quality material: the solar panel brackets is using high-quality aluminum alloy materials, high strength, corrosion resistance, uv resistance, high frequency insulation performance, will not be affected by hot, cold or humid weather.
- Safe and unique design: the solar panel bracket is lightweight and compact, thin but very solid. the ventilated z-shape with extra edge is exactly what you need to protect the solar panel battery.
- Excellent performance: sturdy and durable, not easy to be bent, working well during hot, cold or humid weather. we offer risk-free purchase service and our customer service always offers a satisfying solution for you.
SHOWview product
Coupon copied
