10 Best
Signal Converters
-
Product Highlights- ★input digital signal can be 5v or 24v level 0-100% pwm signal.
- ★can be used for industrial control panel plc or other signal interface switching.
- ★pwm converts digital into analog signal (0 to 10v).
- ★output analog signal can be 0-10v voltage or 0-5v voltage.
- ★this module is easy to wire and convenient to use.
SHOWview product -
-
Product Highlights
- 【voltage level converter】voltage level converter board that can convert dc voltage from 24v to 5v。support mcu/plc signal level converting.
- 【signal module】the dc power supply matches the signal output voltage. for example, if the signal is 3.3v to 5v, then vcc = 5v input, stable performance.
- 【8 channel】this 8-channel digital signal converter converts pnp to npn and supports a max conversion frequency of 20khz. the board is available in blue or green, with no impact on function.
- 【led indicator】each channel has an led indicator for easy identification of its operational status.
- 【photoelectric isolation module】it enables signal isolation, level conversion between single-chip microcomputers, plc, and other signals, as well as pnp/npn signal and signal level-voltage conversions.
SHOWview product -
Product Highlights
- 【how to use】in order to enjoy pleasant music, please set your dvd or music player audio output to pcm or lpcm. this audio converter supports uncompressed 2-channel lpcm or pcm digital audio signal output. not available for 5.1 channel.
- 【wide application scenarios】easy installation, simple operation, plug and play. familiar signal input: toslink, rca (coaxial); output: rca(r/l), 3.5mm jack; suitable for party and home, such as ps3, ps4, blu-ray player, hd dvd, home theater system, av amplifier.
- 【rybozen 192khz audio converter】for the convenience of use, we are equipped with an optical fiber cable and a power adapter. this audio converter with 3.5mm jack audio can convert coaxial or optical digital pcm audio signals to analog rca l/r and 3.5mm jack audio simultaneously.
- 【multiple sampling rates to meet your needs】this digital to analog audio converter supports sampling rates of 32, 44.1, 48, 96 and 192khz. and it is the 24*bit s/pdif input bit stream of the left and right channels. provides perfect noise-free, no electromagnetic transmission.
- 【thoughtful service】rybozen provides 24-hour online technical support and 30-day refund. we are at your service. if you have any questions, please feel free to contact us.
SHOWview product -
Product Highlights
- 【supports mainstream digital optical/coaxial input】 sampling rate at 32, 44.1, 48, 96 and 192khz, 24-bit s/pdif incoming bit stream on left and right channels.
- 【high-grade aluminum alloy design】 overall shielding without signal interference, gold plated sockets, ensure high-quality audio signal to send
- 【spdif to rca converter】it converts coaxial or toslink digital audio signals to analog l/r audio and available for connection to an external device such as an amplifier.audio equipment via standard rca jacks.(note:tv can't be an output device)
- 【mainstream digital optical/coaxial input rca l/r and 3.5mm jack output】 digital optical/coaxial and rca l/r and 3.5mm jack adapt to most analog output / digital input devices on the market
- 【plug and play】 no need to install drivers, easy to install and operate; also, compact size, easy to carry, ideal for home or professional audio switching(note: it is incompatible with 5.1 channel signal such as dolby ac3, dts, please set the output audio mode of the device to pcm or lpcm before using)
SHOWview product -
Product Highlights
- Pwm signal input level range: 4.5v to 10v peak to peak level, jumper inserted at 5v. this type signal mainly for conventional industrial control card (such as for mach3 board), for 5v the cpu interface. 12 to 24v peak to peak level, jumper inserted at 24v. this type signal mainly for conventional plc interface.
- Current: max. 12ma. input digital signal can be 5v or 24v level 0-100% pwm signal.
- Broad utility: can be used for industrial control panel plc or other signal interface switching.
- Main funtion: pwm converts digital into analog signal. output analog signal can be 0‑10v voltage.
- Easy to install: this module is easy to wire and convenient to use.
SHOWview product -
Product Highlights
- Standard connector : the audio signal processor is equipped with a 15cm dedicated line to avoid current noise interference caused by messy wiring
- The advantages of the audio signal processor : delay switch line output, reduce the impact of the power amplifier or subwoofer, thereby eliminating the current interference of the power amplifier speaker when the host is turned on
- How to use : connect the power cord to the converter harness, and connect the car to the other end of the host. the other end of the two car audio cables is connected to the car audio amplifier. there are complete wiring instructions and product usage methods on the product packaging
- Low frequency output : the audio extraction converter of the car audio system converts the high frequency output by the speaker into a low frequency output, and connects the signal output of the car amplifier or subwoofer
- Wide application range : smart line output converter is used for hosts without low frequency output, such as cassette player/card player/cd/vcd/dvd, etc
SHOWview product -
Product Highlights
- ✅【clear and pure sound】- get the best audio quality with this powerful converter. it adopts anti-interference and electronic noise reduction technology to ensure crystal clear audio with no delay, static, or distortion. immerse yourself in a superior audio experience that heightens your overall listening enjoyment.
- ✅【easy to use】- simple installation and easy operation, needn’t install extra driver. in addition, the dac converter comes with an optical, coaxial cable and a power supply for transmitting digital and providing power respectively, everything is arranged for you. designed by aluminum alloy and gold plated sockets, dac converter is overall shielding without signal interf...
- ✅【digital to analog audio converter】- say goodbye to audio compatibility issues with this digital to analog audio convert. it allows you to easily convert optical/coaxial digital audio signals into stereo rca(l/r) and 3.5mm jack analog audio signals. with this dac, you can experience exceptional audio quality with enhanced and more realistic sound effects. please notice...
- ✅【high-quality sampling】- enjoy high-quality audio with this converter’s 192khz sampling rate and 24-bit s/pdif incoming bit stream. this feature provides enhanced audio clarity and richness, making your surround system truly come to life. when using a dac to connect a tv device, it is necessary to set the device's output format to either pcm (pulse-code modulation) or ...
- ✅【wide compatibility】- this digital to analog adapter is compatible with a variety of devices, including receivers, speaker, av amps, old sound system, bose product and headphones with rca or 3.5mm jack input. it also works with devices with optical and coaxial output such as tvs, gaming consoles, and blu-ray/dvd players. get the best audio quality with this versatile a...
SHOWview product -
-
Product Highlights
- 100% brand new kicker amp bass control, used for car cd vcd dvd player without low frequency rca output.
- Wiring diagram is attached on the back of the package, convenient to install.
- High-frequency line output converter will be converted to low-frequency rca output, connect the car amplifier subwoofer signal input.
- The line out converter car audio has compact design for easy plug & play installation. such a practical tool you will need it.
- For cd machine without rca output seat to add a subwoofer and use this high to low speakers to receive the subwoofer input.
SHOWview product
Coupon copied
