10 Best
Pyle Marine Amplifiers
-
Product Highlights- High-level terminal inputs and gold-plated low-level rca inputs with adjustable input level
- Ready for either 4- or 8-ohm speakers, in pair
- Waterproof two-channel power amplifier with 2 x 120 watts maximum output
- Overload, short circuit, and thermal protection; heavy-duty aluminum heatsink
- Remote turn-on/off connector
SHOWview product -
Product Highlights
- Powerful 1200 watt: this amplifier receiver is powerful with its 1200 watt max. it has an anti-thump turn on and soft turn on or off to save energy
- Short protection: built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp
- Waterproof & weatherproof: the audio amplifier is waterproof with its marine grade rating of ip-65
- 4 channel amplifier: pyle’s plmtr4a is engineered as a 4-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too
- Compact and lightweight: the subwoofer amp is compact with an exact dimension of 6.2’’ x 3.5’’ x 2.1’’ and lightweight with only 2.29 lbs
SHOWview product -
Product Highlights
- Powerful 400 watt: this amplifier receiver is powerful with its 400 watt max. it has an anti-thump turn on and soft turn on or off to save energy. comes with 2 to 4 ohm speaker impedance and adjustable volume control
- Short protection: built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp and your vehicle's electrical system from short circuit conditions. it has 10a fuse
- 2 x 100w rms at 4 ohms-anti-thump turn-on-volume gain remote control-fuse: 10a-stereo to rca adaptor
- 2 x 300w rms at 2 ohms-adjustable high low level inputs-s/n ratio:95db-color: blackaccessories:
- 2 ohms stereo stable-power protection circuitry-frequency response: 10hz-40khz-ipod/mp3 waterproof 3.5mm
- Waterproof & weatherproof: the audio amplifier is waterproof with its marine grade protection. it has a rugged construction and integrated power wiring harness to combat weather conditions as well
SHOWview product -
-
Product Highlights
- Product 1: treated foam surround: made entirely of specially treated foam surround for durability. designed with this non-fatiguing suspension to keep equipment safe. it is a clean-cut car subwoofer that boasts a non-pressed paper cone and black plastic basket.
- Product 1: dual voice coil: the speaker subwoofer comes with a 1.5" 4-layer dual voice coil to resist corrosion. it has a sensitivity of 89db to push audio to its maximum and resonate an unmatched performance
- Product 2: rca stereo input: for an easier use of this hydra marine amplifier, it comes with premium rca inputs if your marine receiver lacks rca output jacks, you can connect speaker output leads to the high-level terminal inputs.
- Product 2: powerful 400 watt: this amplifier is powerful with its 100 watt x 4 max or 400 watt and dual mofset power supply comes with dual adjustable input gain level controls between 1-300mv and 4 or 8 ohm speaker impedance.
- Product 1: 800 watt power: this car subwoofer has a power of 400 watt rms to 800 watt peak that will produce high sound resonance. it also has 40 oz. magnet, spring-loaded pushdown speaker terminals, and dual 4 ohm impedance
- Product 1: non-pressed paper cone: it is a clean-cut car subwoofer that boasts a non-pressed paper cone and black plastic basket. it will enhance car stereo by producing powerful audio and perfect sound quality
SHOWview product -
Product Highlights
- Product 1: for enhanced sound: the hydra subwoofer is a great addition to your marine stereo sound system. no sound system is complete without the perfect subwoofer for complimentary bass so don't deprive your boat from the absolute best sound you can get
- Product 1: superior powerful sound: the white outdoor bass speaker features an 8” high quality polypropylene cone. the 40 oz magnetic structure and 1.5” high temperature voice coil boom w/ power and achieve a frequency response of 35 hz to 3.5 khz
- Product 2: rca stereo input: for an easier use of this hydra marine amplifier, it comes with premium rca inputs if your marine receiver lacks rca output jacks, you can connect speaker output leads to the high-level terminal inputs.
- Product 2: powerful 400 watt: this amplifier is powerful with its 100 watt x 4 max or 400 watt and dual mofset power supply comes with dual adjustable input gain level controls between 1-300mv and 4 or 8 ohm speaker impedance.
- Product 1: 400 watt power: pyle’s 8 inch marine subwoofer offers a peak power of 400 watts w/ 4ohm impedance. it lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your marine music audio system
- Product 1: water-resistant: the professional compact loud speaker system features a marine grade waterproof plastic case construction making it safe to be installed and used in places where moderate water splashes occur such as in marine vehicles
SHOWview product -
Product Highlights
- High level inputs - speaker level inputs are commonly referred to as high-level inputs. speaker level inputs will be used to connect the r1100m to your factory radio or an aftermarket radio that does not have low-level (rca) inputs
- Low pass crossover - a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. you will use the low-pass filter to primarily keep high notes out of your subwoofer(s)
- Specs - dimensions: 9.1” x 0.4” x 2.3”, it can be installed in a variety of different places due to its’ slim and compact design, weight: 4.43 lbs.
- Mosfet monoblock power amplifier
- Blue illuminated boss logo
- Rms power @ 4 ohms: 250 watts
SHOWview product -
Product Highlights
- Rca stereo input: for an easier use of this hydra marine amplifier, it comes with premium rca inputs. this also includes a 3.5mm-to-rca adaptor so you can connect your device and a remote for volume control.
- Powerful 400 watt: this amplifier is powerful with its 400 watt maximum power supply. comes with adjustable input gain level controls of 2 to 4 ohm speak. it’s also waterproof
- Power protection circuitry with anti-thump turn-on and soft turn-off to protect your speakers
- Also accepts standard high- and low-level inputs from marine head units
- Premium 4 channel amplifier: engineered as a 4 channel marine amplifier that allows high quality stereo reproduction from source. this will power up your speaker and universally compatible with a variety of head units like mp3 and smartphone.
- Short protection: has a built-in power protection circuitry and soft turn on/off. these are to protect the amp and your vehicle's electrical system from short circuit conditions.
SHOWview product -
Product Highlights
- Premium rca input: for an easier use of this hydra marine amplifier, it comes with premium rca inputs. if your marine receiver lacks rca output jacks, you can connect speaker output leads to the high-level inputs.
- Powerful 1000 watt: this amplifier is powerful with its 1000 watt maximum and dual mofset power supply. comes with dual adjustable input gain level controls of 10k ohm (low) and 100 ohm (high) speaker impedance.
- Waterproof four-channel, bridgeable mosfet power amplifier with 4 x 250 watts maximum output
- High-level molex and gold-plated low-level rca inputs with adjustable input level
- Variable bass boost of up to 18db at 60hz
- 4 channel bridgeable amplifier: pyle’s plmra420 is engineered as a 4 channel bridgeable marine amplifier that powers up your speaker and is universally compatible. it also has high and low electronic crossover network or pass filters.
SHOWview product -
Product Highlights
- Product 1: 200 watt power: these boat component speakers provide up to 200 watts peak power w/ 100 watt rms because it is equipped with 8 oz circuit magnet. it's all housed in heavy duty molded abs machined basket and detachable grill
- Product 1: full range sound: the 2-way dual cone speaker features 1-inch aluminum voice coil and 0.5” neodymium dome tweeter creating a full range stereo sound reproduction. the poly carbon cone w/ butyl rubber surround provides a strong foundation
- Product 2: rca stereo input: for an easier use of this hydra marine amplifier, it comes with premium rca inputs if your marine receiver lacks rca output jacks, you can connect speaker output leads to the high-level terminal inputs.
- Product 2: powerful 400 watt: this amplifier is powerful with its 100 watt x 4 max or 400 watt and dual mofset power supply comes with dual adjustable input gain level controls between 1-300mv and 4 or 8 ohm speaker impedance.
- Product 1: 85hz-6khz frequency response: pyle’s dual 6.5 inch weather-resistant marine speakers with 0.5” neodymium dome tweeter speaker features 85hz-6khz frequency response that will complete a sound system of a boat or any marine vehicle or woofer enclosure
- Product 1: 4 ohm impedance: this black marine grade speaker set has 4 ohm impedance rating that compensates the undersized wire found in many of today’s marine vehicles. it ultimately reduces distortion so you can enjoy a crisp and clear sound
SHOWview product
Coupon copied
