10 Best
Pump For Fuel Injecteds
-
Product Highlights- Material: solid 6061-t6 aluminum
- Compare to the stock plastic pickup, this billet fuel pickup is much attractive
- Fitments: for yamaha rhino 660 carb models only (not needed on fuel injected models.)
- Condition: new
- Replace the stock the old before it ruins your weekend!
SHOWview product -
Product Highlights
- Application: universal for carbureted applications on most 4, 6 and 8 cylinder vehicles .
- Important[only fit for gasoline and diesel(without alcohol ) engine, and please be sure to use with filter, or it will affect the usage of fuel pump!!!]
- Reduces vapor lock and flooding, works well as a fuel transfer pump or booster pump.
- Operating fuel pressure: 4-7 p.s.i.(gasoline); voltage: 12v ; flows: 35(gph); package: fittings*1 and mounting hardware *2 .
- Quite operation. carbole's every single pump is 100 percent tested throughout the entire manufacturing process for worry free, out-of-the-box performance .
SHOWview product -
Product Highlights
- Application vehicle: mer-cruiser v6 and v8 305 / 350 / 377 / 454 / 502 electronic fuel injection engines. fits mpi and efi engines only. not correct for carburated engines.
- This pump looks the same externally as fuel pumps from carburated engines, but the small end is not threaded (carburated fuel pumps are threaded on the small end). this fuel pump is from fuel injected engines and will not interchange with fuel pumps for carbureted engines.
- Oem part numbers: 861156a1 ; 807949a1 ; 861156a03 ; 861156a2 ; 126511216 ; ph500m014 ; 305350454502 ; 935433 ; 18-35433 ; 861156-1 ; e11004
- Boat fuel pumps carry fuel from the gas tank directly to individual engine cylinders. to ensure great combustion and quick starts, this operation is performed under high pressure. over time, your fuel pump may wear out and require replacement.
- Please carefully compare the pictures or oe numbers to match your original parts before purchasing the product. if you are not sure if this product is suitable for your model, please feel free to contact us and we will get back to you as soon as possible.
SHOWview product -
Product Highlights
- Replacement for mercury marine 861156a1, mallory 935433, 9-35433, 9 35433, sierra 18-35433, 1835433, 18 35433, 861156-1, 8611561, 861156 1, airtex e11004.if you are not sure, please send us an email with your year make and model or a picture of your unit and we will get you going in the right direction!
- Easy to install, but still recommended to be operated by professionals.
- Fitment: for mercruiser v6 and v8 305 350 377 454 502 electronic fuel injection engines. fits mpi and efi engines only.
- Note: this item is a replacement part. please make sure the images are the same with what you want. if not, please do not purchase it even your model is in the described list!
- Every product has quality inspection before leaving the factory.
SHOWview product -
Product Highlights
- Flow rate of 35 gph; fuel pressure is 4-7 psi;
- Perfectly suitable for toyota, ford, honda, mazda, and any other suitable car.
- Works well as a fuel transfer pump
- Universal fit - most domestic 4,6 & 8 cylinder carburetor applications
- Great for gasoline engines; not for fuel injected engines
SHOWview product -
Product Highlights
- High pressure for fuel injected engines only
- Meets or exceeds oem quality
- Replaces oem part number 861156a1
- Small outlet end is not threaded. small outlet end is not threaded. small outlet end is not threaded. small outlet end is not threaded.
- This is the fuel pump that is used in the 'cool fuel' assembly. the small outlet is not threaded since it is only used in the 'cool fuel' assembly. the low pressure pumps looks like this but the small outlet is threaded and goes in-line. the hi and low pressure pumps look the same except for the threaded or non-threaded small end.
SHOWview product -
Product Highlights
- Low pressure application for carburated engines comes with tight seal npt fitting and o rings.
- This is a low pressure pump that fits carburated engines with a single fuel pump or some fuel injected engines that use a low pressure and a high pressure pump system. this is the low pressure pump that is threaded on the small outlet end. the high pressure pump looks similar but is not threaded on the small outlet end. the high pressure pump is enclosed in the 'cool fu...
- Advanced polymers, brushes, and commutators to ensure long life and durability in multiple fuel blends.
- Does not fit fuel injected engines both inlet & outlet are threaded - low pressure pump for carbureted engine only / low pressure pump. operation pressure: 9psi - 10 psi.
- Replaces: mercruiser 861155a3 / mallory 935432 / sierra 18-8868
SHOWview product -
Product Highlights
- 5/16 inch inlet & outlet; 5/16" i.d. hose; must be mounted within 12 inch fuel tank
- Avoids vapor lock and flooding, works well as a fuel transfer pump or booster pump .
- New super 12d fuel pump. fuel pressure: 5-9 psi; flow rates: 35gph;
- 12v electric diesel pump universal fits for most 4,6 & 8 cylinder carburetor applications
- Not for fuel injected engines. perfect use with diesel applications, but not for e85, ethanol, methanol, etc.
SHOWview product -
Coupon copied
