8 Best
Power Milling Machines
-
Product Highlights- 【vertical & horizontal design】- our precise rotary table can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience.
- 【convenient to adjust】- the dial is marked with an accurate scale. just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently.
- 【remarkable quality】- ht200 casting is mainly used to cast parts subjected to pressure and vibration on mechanical equipment. using it as the material, our products are durable, shock-absorbing and heat-resistant.
- 【excellent precision】- the indexing plate can be graduated 360 degrees. resetting dial and hand wheel can be graduated in seconds. the minimum scale is calibrated to 10 seconds with high precision.
- 【multiple application】- designed to be widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. practical design can meet a variety of workshop work needs.
SHOWview product -
Product Highlights
- 【portable and easy to install】this power feed for milling machine is compact and portable.weight: 3.75kg/8.27lbs, size: 7*3.5*12.8 inch. and whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.after-sales:you will get worry-free 18-month warranty and lifelong technical ...
- 【automatic and manual control】you can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.and this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs.
- 【basic parameters】gpoas x-axis power feed is made of aluminuml;power parameter:90watt,110v input voltage,50/60hz,single phase;rotate speed:0-200 rpm.max torque:450in-lb;max feed rate: 650mm/min; max return speed: 850mm/min.this power feed fits some milling machines like bridgeport, precision matthews, enco, jet, sharp, acer, webb, etc.
- 【stable and efficient】this power feed adopts gleason spiral bevel gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.and when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic p...
- 【wide application】this milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end,but it will not fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical bridgeport type as mentioned above.note...
SHOWview product -
Product Highlights
- 【high performance】this power feed for milling machine is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics.the two gears fed by this power table are designed to not mesh and wear at the same position, which not only increases durability and service life, but also reduces noise over time.
- 【excellent speed control】the speed can be adjusted manually or automatically in the entire range according to the requirements of the operator.
- 【basic parameters】z-axis power feed material:made of aluminum material;voltage: 110v,50/60hz;rotate speed:0-200 rpm.max torque:450in-lb;max feed rate: 650mm/min; max return speed: 850mm/min
- 【easy to use】small volume and easy installation,noiseless direction changes. fit almost any horizontal knee type milling machine and other small machinery.
- 【wide application & customer service】the power table feed is suitable for most vertical knee mills machine, such as bridgeport, precision matthews, grizzly, enco, jet, sharp, acer, webb, gmc, kent, clark, supermax, etc.note:we are very sorry for a few product damages caused by the long-distance transportation, so no matter the product you received is damaged or encounte...
SHOWview product -
Product Highlights
- Main parts: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. all of the parts are made of metal.
- Maximum motor power is 144w by using more powerful motor.
- With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining.
- Main parts: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. all of the parts are made of metal.
- Main parts: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. all of the parts are made of metal.
- Motor case and headstock are jointed.
SHOWview product -
Product Highlights
- 【stable performance, precision and durable bearings】when fast escorting, if the tool collides with the workpiece, or turn left or right instantly, it is equipped with a special safety device to transmit plastic gears and electronic parts without damage. small use sound, no noise, high speed, effectively improve the working efficiency.
- 【safe and stable】the knife walker adopts 110v safety voltage, safe and stable operation, the gear ratio of the transmission plastic gear and the motor core shaft is infinitesimal, the two gears will not return to the origin, the plastic gear has a long service life, and the more you use the gear, the smaller the sound.
- 【feature-2】enhanced torque to boost low-speed torque for low-speed heavy-duty cutting capability. 0.2-second extreme brake design allows for quick forward and reverse operation to save machining time.
- 【parameter】model: jn400s handle model; power: 90w; voltage: 110v; weight: 6kg; current: 2.8amp; speed range: 2-200rmp; torque: 650in-lb.
- 【simple operation, convenient processing】good efficiency in speed adjustment, when the tool is cutting, the change of escorting speed is small, then the cutting surface precision is good; when escorting at low speed, the machine will not shake.
- 【feature-1】mainly used for milling machine table in the x-coordinate direction when the work movement, to achieve forward and reverse rotation and infinitely artificial speed regulation, instead of the traditional gear box speed change mechanism.
SHOWview product -
Product Highlights
- Milling machine power feed features noiseless direction changes and direction control knob for easy and rapid operation
- Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics
- Model: al-310s; type: x-axis; motor: 110v, 50/60hz; torque: 450lbs; rpm: 0-200 rpm
- The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time
- This small volume and easy installation x-axis power feed is designed to automate the feeding process on bridgeport type milling machines
SHOWview product -
Product Highlights
- Milling machine power feed features noiseless direction changes and direction control knob for easy and rapid operation
- Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics
- Model: al-310s; type: x-axis; motor: 110v, 50/60hz; torque: 450lbs; rpm: 0-200 rpm
- The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time
- This small volume and easy installation x-axis power feed is designed to automate the feeding process on bridgeport type milling machines
SHOWview product
Coupon copied
