10 Best
Portable Plasma Cutters
-
Product Highlights- [digital screen display]: the screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. if plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
- [cutting thickness]: adopting advanced igbt inverter technology, 50/60hz high-frequency pilot arc plasma, dual voltage 110/220v, 60% duty cycle. current display at 110v is 15-35a, under 220v current display is 15-50a, the maximum cutting thickness is recommended to be 12mm @ 35a 110v, 50psi; 16mm@50a 220v, 60 psi.
- [pilot arc function]: btc500dp 7th plasma cutter has the pilot arc function. it is a high frequency non-touch arc starting mode. the torch head does not need to touch the metal plate. added pa adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
- [sensor of air pressure & air compressor]: inside of machine have sensor of air pressure, user can adjust the air pressure through the regulator. the air filter is installed at the rear of the machine with a quick air connector 1/4 npt, which can be used after opening the box. users can use it after connecting to the air compressor. recommended air compressor air pressu...
- [pt/2t/4t/pa function]: post time function, with an adjustment range of 3-15 seconds. adjust the cooling time of the torch head to extend the service life of consumables. generally speaking, we recommend a cooling time of 4-8 seconds. 2t/4t automatic cutting release your finger. 2t is semi-automatic cutting control, and 4t is automatic cutting control. pa adjust the tim...
SHOWview product -
Product Highlights
- Compact & portable: the inverter plasma cutter has a handle and a thoughtful torch design that can provide a sure, comfortable grip, making the whole machine easy to take.
- Dual voltage: the ability of the dual voltage allows the plasma cutter to operate at 110v or 220v, with a power of 60hz. the plasma cutter has the function to supply gas ahead and turn off gas delayed. high cutting speed and cutting smoothly.
- Powerful air plasma cutter: the cut-50f plasma cutter can easily cut up to 1/2’’(12.7 mm) metal under maximum output with ultimate portability weighing only 22.7lbs.
- High efficiency & energy saving: the cutting machine adopts the inverter technical of switch power, greatly reducing the dimensions and weight of the main transformer. the energy-saving can reach up to 50% as well as efficiency is increased by 30%.
- Wide application: this plasma cutter can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc. we will provide quality assurance for every product. in the event of product damage or missing parts, please feel free to contact us and we will solve it for you within 24 hours.
SHOWview product -
Product Highlights
- Easy to use/safety:portable plasma cutter equipment only takes about 2 mins and you can start your cutting working.great for beginners and diy user.dual voltage capability allows for automatic adaptation to switch input power without the need for an external conversion plug,passed variety of professional tests.
- Advanced igbt technology:cutting smoothly,you can adjust the post-flow time from 5-15 seconds to have a clean cut. when you stop cutting,air runs on for a minute to cool the consumable of the plasma cutter torch. this will extend consumable life.
- Powerful performance:automatic dual-voltage 110/220v. with advanced igbt inverter technology kp-cut50d cutting thickness of 1-16mm.on 220v carbon steel max rated clean cut thickness: 1/2"(10mm),max severance thickness: 3/4"(16mm) .under 110v clean cut chickness : 3/8 "(9mm) output current 30a,60% duty cycle.
- High performance:touch arc plasma cutter suitable cut for alloy steel, stainless steel, mild steel, copper, aluminum, etc. high-quality components and advanced technology increase product life and work efficiency above 35% compared to ordinary machines,and more affordable
- Lightweight/portable move:kp-cut50d plasma cutter machine tiny and light enough to move with your workplace,only weighs 17 pounds, easy to carry to anywhere.buy with confidence,provide 30-day money back guarantee and 1-year warranty for you.
SHOWview product -
-
Product Highlights
- 【powerful cutting performance】automatic dual-voltage 120/240v. with advanced igbt inverter technology, 10-60a dc output, 5/8” ideal clean cut and 3/4” maximum severance cut under 220/240v. 10-35a dc output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120v. suitable cutting for stainless steel, alloy steel, mild steel, copper, aluminum, etc. uses non-ha...
- 【buy with confidence from reboot】reboot offer a 30 day money-back guarantee and 1-year new replacement warranty covered by our us based lifetime technical support. to avail the warranty, please contact us to activate the warranty when you receive the goods.
- 【package includes】 rbc6000dl plasma cutter, plasma cutting torch ag60, ground clamp, air filter regulator, consumables, instruction manual etc.
- 【60a non-touch pilot arc plasma cutter】effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. the pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
- 【voltage conversion】 the power cord plug installed on the machine is a 110v us standard plug. a conversion cord is included to easily convert 110v to 220v or 120v to 240v for use in your home, shop, or factory. 30a circuit breakers are recommended for 220v and 60a circuit breakers are recommended for 110v.
- 【upgraded for portability and lightweight, easy to assemble】this plasma cutter machine only weighs 9 pounds, easy to carry. the pre-installed quick air coupling, only takes 30 seconds and you can start cutting. significantly save your preparation time.
SHOWview product -
Product Highlights
- Cutting meterial - cutting machine suitable for cut metal plates in various routes, especially suitable for cutting carbon steel, stainless steel, aluminum and copper. less cleaning, maintenance, noxious gases, and less fire hazard. designed for both demanding industrial and construction work, or home and hobby use.
- 55amp plasma cutter - plc55x max output current 55a; dual voltage 110v / 220v±15%%; dual frequency 50/60hz; max 1/2 "(12mm) clean cut; when the air pressure is between 60psi - 70psi, better cutting results are achieved.
- Upgrade igbt plasma cutter - igbt inverter plasma cutter, stable and mature, energy saving 30%. compared with oxyacetylene cutting, the plasma cutter cutting speed is increased by 1.8 times.
- Safety & protection - with protection of electric circuit against over current, over voltage and low-voltage. using air pressure adjusting equipment. able to operate when the external air pressure is too high.the cutting current is continuously adjustable, direct and precise.
- Quality assurance - we are a factory. buy with confidence as we offer 100% satisfaction or money back guarantee and 1 year limited warranty. we have friendly customer service. if any questions, please contact us any time.
SHOWview product -
Product Highlights
- 【dual voltage】 automatic dual-voltage 120/240v. it allows the machine to run directly on 240 v 50/60 hz power or on 120 v 50/60 hz with the use of a power adapter, without removing the covers to relink the power source. suitable home diy and industrial projects.
- 【portable & lightweight】portable in the shop or at the job site, this plasma cutter machine only weighs 8.8 pounds, easy to carry. package weighs 16.5 pounds. it allows the end user to easily move from location to location.
- 【warranty from reboot】we provide 30-day money back guarantee and 1-year warranty for you. 7 day per week support in usa.
- 【powerful performance】with advanced igbt inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (12mm) ideal clean cut, 60% duty cycle. the recommended current is 60a, the recommended psi is between 30-50psi (0.21-0.35mpa) when connecting 120v, the recommended psi is between 30-70psi (0.21-0.49mpa) when connecting 220v.
- 【wide cutting ability】this 60 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. it is very friendly to both diy, beginner cutter, and professional workers.
- 【stable and durable】rbc6000d provides maximum customer convenience by automatically controlling the arc when cutting expanded metal or multiple pieces of metal. when cutting expanded metal, the ignition arc quickly switches as needed and provides maximum power for cutting thicker metal - all automatically no manual re-triggering is required, reducing user hand fatigue.
SHOWview product -
Product Highlights
- 【high quality】cut-50 50amp plasma cutter is made of high quality components, by adopting the most advanced inverter technical of switch power, as well as the product life and work efficiency are increased by 30% than ordinary machines, smooth cutting surface,permanent supply of high quality consumables
- 【application】 this is a professional plasma cutter, which is widely used for cutting stainless steel, alloy steel, mild steel, copper and other color metal materials, cutting thickness is 1-20mm, effective cutting thickness 10mm
- 【portable design】global sale：usa, canada, japan, mexico (with american plug), europe (with european plug), compact plasma cutting machine with lcd digital display and equipped with a portable handle，it is very convenient to operate and carry.long term supply of consumables.
- 【dual voltage】this plasma cutter can automatically adapt to switch input power of 90v-260v(110v/220v), plug and play in different environments, no external conversion plug required
- 【quality assurance】 we are a factory! we have 12 years professional production experience of plasma cutter, 2-year warranty, please be assured to buy
SHOWview product -
Product Highlights
- 【easy to assemble】with a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. only takes 30 seconds and you can start cutting.
- 【advanced digital technology】you can adjust the post-flow time from 5-15 seconds to have a clean cut. also could select 2t/4t to have a comfortable working experience. the exclusive large led design provides you with an accurate data display and helps you read all data easier and more clearly without taking off your helmet.
- 【easy to cut, powerful performance】automatic dual-voltage 110/220v. with advanced igbt inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. the recommended current is 50a, the recommended psi is between 20-40psi when connecti...
- 【portable & lightweight】this plasma cutter machine only weighs 13 pounds, easy to carry. it's also tiny and light enough to move with strap in any workplace(strap included).
- 【safety & durable】 arccaptain welder machine have passed a variety of professional tests and certifications including tüv and ansi standards before leaving our factory. we provide 30-day money back guarantee and 2-years warranty for you.
SHOWview product -
Product Highlights
- 💪igbt inverter cutting ability: 10-50a dc output,1/2” ideal clean cut and 3/5'' maximum severance cut on 220v. 10-35a dc output,1/3" ideal clean cut and 2/5" maximum severance cut on 110v. work with the non-hazardous compressed air to cut stainless steel,alloy steel,mild steel,copper,cast iron and chrome,air pressure 60-70psi recommended
- 💪package includes:power supply, plasma cutting torch, ground clamp,converter power cord, pre-installed npt 1/4” industry type d plug and air filter regulator, consumables, instruction manual, etc.(as picture)( stainless steel,gas tube, hoop,plasma tips nozzle extended, electrode- extended,shroud ceramic cup ,gas ring)
- 💪non-touch pilot arc plasma cutter: pilot arc technology allows you to cut without touching the tip to the metal.efficiently cuts though rough, painted, and rusty surfaces,and produces minimal slag, better cutting quality and longer consumable life
- 💪safe design：built-in over-heat,over-voltage protection,it is under-voltage protection.it is not only can be suitable for businesses and diy users but also fully accommodating the demands of professional operators
SHOWview product
![ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage](https://m.media-amazon.com/images/I/51Q-n+rDzVL._SL500_.jpg)
Coupon copied
