5 Best
Plasma Cutter For Cnc Tables
-
Product Highlights- 【non-touch pilot arc】the pilot arc ipt40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
- 【digital control】cut-55ds pro adopts international leading mcu intelligent digital control technology, and all its major parts are performed through software. the air regulator is mounted on the back machine and used to adjust the outlet pressure.
- 【non-hf start】the ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
- 【powerful cut】clean cut: 1/3''@110v 1/2''@220v // max cut: 2/3''@110v 4/5''@220v.
- 【note】the plasma cutting torch is ipt40, for consumables, you may search b09sks98h6. please note that ag60 consumables does not suit this torch.
SHOWview product -
Product Highlights
- Upgraded compact controller box: the control board is upgraded to a compact controller box. emergency stop button and home button are more easily and convenient to access. the control box is also dust-proof for easy maintenance.
- Assembly upgrade: main parts are pre-assembled, and the part of the wires are pre-wired to the controller box. it takes only 10-15 minutes to fully assemble.
- Additional working light: a small working light is added to the z-axis. it helps you to monitor the carving details and process more clearly. each stepper motor has a knob for easy adjusting by hand.
- Structure upgrade: masuter pro is an all-aluminum cnc router, which makes the machine sturdier than the last version. the z-axis uses linear rail instead of rods and t8 lead screw, this greatly improves the stability and accuracy.
- Compatibility upgrade: masuter pro includes 2 spindle clamps: 52mm & 65mm. the 52mm clamp can accommodate the 60w spindle, 300w spindle and the foxalien laser modules. the 65mm clamp is for customized upgrade, such as 65mm trimmer router, 1.5kw spindle, etc. masuter pro also supports the 69mm spindle clamp, please buy separately.
- Large engraving area: the active working area is 15.75” x 15.75” x 2.36” (400 x 400 x 60mm). it is large enough for daily woodworking. it supports extension kit to enlarge the working area; and the extension kit is available (b0bhh3y8x2)!
SHOWview product -
Product Highlights
- Led digital display: the led screen of the cutting machine with the effect of breathing lamp provides you with accurate and comprehensive data information, 110/220v dual voltage automatic recognition of input current and voltage, making reading easier and clearer without removing your helmet.
- Safe and portable: built-in overload protection and fan cooling system. when the output current and machine temperature exceed the set standard, the plasma cutting machine will automatically power off. the cutting machine can be connected to the cnc workbench, with 2 and 5 pins connectors, in the workshop or work site carry use.
- Non-hf start: 50amp plasma cutter machine blow back start technology allows you to cut without touching the metal tip, effectively cutting rough, painted and rusted surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm.
- Easy to use: plasma cutter machine adopts igbt inverter technology. plasma cutter equipped with npt 1/4 "air regular, duty cycle is 60%. built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables.
- Package content: 1×plasma cutter machine, 1×ipt53 cutting torch, 1×earth clamp with cable, 2×tip (nozzle), 2×electrode, 1×air hose, 1×air regulator, 2× cnc port connector ( 1pc 5 pins, 1pc 2 pins), 1 × wire adapter.
SHOWview product -
Product Highlights
- Plasma cutter cutting thickness: max cutting thickness 25mm@55a 220v 70psi, clean cutting thickness 20mm@55a 220v 70psi, 12mm clean cutting thickness under 110v 60psi. 63a power break, 45l/min air compressor is suggested
- Cnc plasma cutting machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for the arc voltage output ratio 1:1, 4 pins connector for signal control.easy works with cnc cutting table.the plasma cutter with non-hf pilot arc function (not hf pilot arc) under this function, pilot arc will not interference to machine( hf pilot arc will interfer...
- Dual voltage plasma cutter :this is a 110/220v non-hf blow back pilot arc plasma cutter, input power ac110/220v±15%,ac110/220v 55a cutting current with 60% duty cycle, 220v 55amps 110v 35amps cutting current.the working power range from 100v to 250v, under 220v pilot arc will not reliable if the voltage lower than 190v. under 110v, the pilot arc will not reliable if the...
- 2t/4t function :plasma cutting machine cut60dn with 2t/4t function, also with air/cut function, 2t 4t easy let the user operate machine and it is great help for the cnc cutting table. thc torch height control enabled. machine with function for torch protection, the led light up if the torch connecting is not well, it will also lighting up while replacing the torch consu...
- Suitable material:this plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm alloy steel, 4mm copper, 8mm aluminum. all the cutting thickness under the rate 220v 55amps 60-75psi, the cutting result may different depend on different voltage current and air pressure
SHOWview product -
Product Highlights
- Compatibility: drop-in replacement for use with a genmitsu proverxl 4030 v1 (note: it is not compatible with proverxl 4030 v2). the 6060 aluminum board & mdf board are also available to order.
- Simple assembly: we will take you through the assembly process every step of the way. you could find the installation guide located in our at the resource center.
- Level up your cnc: this kit will extend all of your xy-axis, easily convert your proverxl 4030 v1 to a 6060 (24”x 24”) with pre-installed axis carriages. evolve with your cnc, upgrade as you go, start big and get to making more.
- Flexible extension: you could extend to 6060, 6040, or 6030 with this kit, just built to suit your needs.
- Cost-effective: save money by putting your current cnc to better use. you don’t need to spend more on complicated assembly.
SHOWview product
Coupon copied
