3 Best
Pioneer Aftermarket Radios
-
Product Highlights- Reverse and e-brake signals are provided from the pioneer connector. +12v switched (red) and ground (black) connections are also provided for a steering wheel control interface or other +12v device.
- These cables are compatible with pioneer headunit radios newer than 2010. high quality speaker wire will result in a clean audio signal. perfect for adding a car stereo with bluetooth.
- Plug and play installation of a pioneer double din car stereo (or single din radio) using the factory wiring. only fits a pioneer radio. (scosche ha10b type connector wired to the pioneer connector)
- Compatible with: 2008- 2013 rdx non-nav, 2013 rdx ; 2006 -2011 civic, 2007 - 2011 crv, 2007 - 2008 fit, 2008 - 2010 odyssey radio non-nav. works great bundled with ha1700b or ha1561dgb dash kit
- This stereo installation kit is perfect for a honda civic car stereo if you are installing a pioneer double din stereo radio or navigation system. antenna adapter is sold separately.
SHOWview product -
Product Highlights
- Steering wheel control wire is provided to the chrysler connector (this signal is unique - the signal is not provided on most aftermarket install harnesses) this can be connected to the axxess aswc-1. reverse and vehicle speed signals are provided from the pioneer connector. +12v (red) and ground (black) connections are provided for connection of a steering wheel contro...
- Does not work with the infinity system - connects speaker signals and power wiring. has a connector for the autoharnesshouse parking brake bypass module. plug and play install for the pioneer e-brake bypass! perfect for dodge dart or dakota car stereo if you are installing an aftermarket pioneer radio or navigation system. jeep stereo install kit.
- Plug and play installation of a pioneer double din car stereo (or single din radio) using the factory wiring. only fits a pioneer radio. (scosche cr02b type connector wired to the pioneer connector)
- Used for ram 1500 radio or jeep stereo upgrade to install a double din pioneer headunit or to add an aftermarket pioneer touchscreen with carplay to a dodge caravan or jeep liberty vehicle. see compatibility below.
- Compatible with 2006-2007 commander, 2007-2008 compass or patriot, 2002-2007 grand cherokee or liberty, 2003-2006 wrangler, 2002-2007 dodge caravan, durango, intrepid, neon, 2006-2007 charger, 2007-2008 caliber, 2002-2010 dodge ram 1500 radio, also fits 2003-2007 300 2007 aspen 2004 concorde 2003-2007 pacifica 2002-2010 pt cruiser 2002-2006 sebring 2003-2007 town & country
SHOWview product -
Product Highlights
- This wire harness allow to install a pioneer stereo radio on truck. also fit hyundai 2006-2008 sonata. lincoln 2003-2005 aviator, 2006-2010 town car. mazda 2008-2010 tribute. mercury 2005-2007 montego, 2004-2007 monterey, 2008-2009 sable.
- Amp turn-on/trigger signal is provided for use with an e-brake bypass or fusing an aftermarket amplifier. reverse and e-brake signals are provided from the pioneer connector since they will need to be connected in some model.
- Fit ford 2009-2013 econoline, 2008-2011 escape, 2004-2014 expedition, 2004-2010 explorer, 2005-2012 flex, 2004-2010 f-150, 2005-2010 f-250/350 super duty, 2006-2007 five hundred, 2005-2011 focus, 2004-2007 freestar, 2005-2007 freestyle, 2006-2012 fusion
- The vehicle speed signal has been connected (this must be cut for pioneer units that don't require a vehicle speed input). steering wheel control wires is included.
- Easy install. one end goes to ford factory plug and other end going to pioneer radio.
SHOWview product
Coupon copied
