10 Best
Pex Connections
-
Product Highlights- No pex tube liner: with no pex pipe tube liner required, sharkbite max plumbing fittings eliminate flow restriction when used on copper/cpvc
- Lead free: flex female adapter is made of high-quality forged dzr brass with reinforced stainless steel that is lead free; all sharkbite pipe fittings meet the same standards for commercial and residential plumbing applications
- Fast and easy install: sharkbite max push-to-connect brass push female adapters are perfect for making easy transitions between cts pipe to an mnpt threaded connections and quick connections to a pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe in any combination. no need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- Strong and durable: the reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- Certified: pushfit female adapters are rated to 200 degrees f and 250 psi with 2k maximum burst
SHOWview product -
Product Highlights
- ✔️【extra long service life】 : resists corrosion and mineral buildup, rust, and freeze damage.
- ✔️【easy installation】 : pex a manifold work with pro-pex ring connection methods with help of expansion tool. compatible with all types and brands of pex a tubing
- ✔️【lead free non-pollution ppsu polyphenylsulfone material】: easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. pex manifolds 6 ports are suitable for domestic water or radiant heating system, also used retrofit construction and for hot or cold water distribution.
- ✔️【applications】 : this multi-port tee pex a expansion fittings can be used in plumbing jobs and connects pex pipe in water distribution and hydronic heating systems.
- ✔️【warning before making purchase】 : package of 2 includes only 2 pieces of plastic pex manifold 6 ports. note: expansion tool & pex ring/sleeve not included in package. also, pex manifold diameter is 3/4" inch trunk ports - two sides open and diameter 1/2" inch for rest 6 service ports must be considered.
SHOWview product -
Product Highlights
- Meet the standard f1960; certified to ansi/nsf-61 and asse 1061 product standard
- Pack of 4. only for pex a pipe/tubing fitting connection
- This efield product is compatible with all types of brands of pex a pipe/tubing
- This efield product is compatible with expanding fitting system, not compatible with stainless steel clamp & copper crimp ring systems
- Need to order expander tool + pex sleeves / ring separately
SHOWview product -
Product Highlights
- Versatile compatibility: this washing machine outlet box is designed to work seamlessly with most washing machines and dryers. the washer hookup box features a 1/2-inch crimp pex inlet connection and a 3/4-inch male hose thread (mht) outlet. it can be inverted for an alternate drain position (center or right)
- Durable construction: laundry valve box and support brackets made from high-impact polystyrene (hips) for long-lasting reliability, and a raised drip guard that prevents potential leaks.
- Certification: 1/2" pex x 3/4" mht valves washing machine outlet box meets cupc requirements.
- Easy installation: the laundry outlet box with valves is designed for recessed residential applications. the washer hookup box and frame can be separated for a flexible layout and fast and strong mounting. it comes with clear and comprehensive instructions; no special tools are needed.
- Includes: washer hook-up box set includes faceplate and mounting brackets.
SHOWview product -
Product Highlights
- 👍︎【high quality pex crimping tool】made of high quality steel with forging process that will not break or deform. pex crimp tool is easy to switch between tightening and removal functions. the ratchet design and automatic release mechanism make it easy to tighten. note: the pex clamp tool is adjusted at the factory, no need to calibrate the tool.
- 👍︎【high cutting accuracy】pex pipe clamp tool usually has a precise cutting function, which can achieve precise pipe cutting when installing pex pipes. this is very important to ensure the quality and reliability of the pipe connection. pex crimping tool kit are equipped with sharp pex cutters that can maintain a high degree of cutting accuracy during the cutting process...
- 👍︎【rust-free】pipe clamps are made of 100% austenitic 304 stainless steel material, which is rust-free, anti-oxidation and wear-resistant. the edges of all lug clamps are polished smooth and will not cause damage to the hose. there are 50 crimping clamps, including 30pcs 1/2inch hose clamps, 20pcs 3/4inch hose clamps and 1 pex crimping tool (pex pipe clamp with crimp siz...
- 👍︎【360° seal】stainless steel single-ear hose clamp has a special ear design that reinforces and provides strong thermal expansion compensation. achieves uniform force on the surface of the hose, compensates for dimensional changes caused by temperature changes, ensures a 360-degree seal, and always remains tight.
- 👍︎【widely used】pex crimping tool set are usually used for many kinds of pex piping systems, including different types of piping systems such as cold water, hot water, heating and floor heating, etc. they are perfectly used in various fields, such as household, automotive, chemical, electrical.
SHOWview product -
-
Product Highlights
- Compatible with all kinds of pex tubing and ss clamp & copper crimp ring connection
- Max working pressure: 250 psi, temperature range: 33 f to 180 f.
- 2 pack1/2-inch pex crimp f1807 connection with copper water hammer arrestor
- Reduce the unstable water pressure and noise, protect your pipe control system.
- Lead free brass and copper, cupc and nsf certified
SHOWview product -
-
Product Highlights
- 「innovative」new design makes it be a multi-function tool which can cinch clmaps and remove the clamps from pipe to re-install
- 「easy」it’s easy to switch cinch and remove function.andthhe ratchet design and self-release mechanism makes the cinch easy.the tool is factory-adjusted with no requirement for calibration tool
- 「universal」this cinch&remove tool meets astm 2098 standard works with stainless steel clamps from any manufacturer to make pex connections from 3/8" to 1"
- 「durable」the cinch&remove tool is constructedof durable high-quality steel with forging process to ensure integrated mechanical property and long service life
- 「convenient」this is a all-in-one kit for pex pipe installation,includes 1pc of cinch&remove tool,1pc of pex cutter,20pcs of 1/2” clamps and 10pcs of 3/4” clamps
SHOWview product -
Product Highlights
- Meet the standard f1960; certified to ansi/nsf-61 and asse 1061 product standard; 400 psi
- Pack of 10. only for pex a pipe/tubing fitting connection.
- This efield product is compatible with all types of brands of pex a pipe/tubing
- This efield product is compatible with expanding fitting system, not compatible with stainless steel clamp & copper crimp ring systems
- Need to order expander tool + pex sleeves / ring separately
SHOWview product
![1/2" PEX Fittings Combo with 1/2" inch Tees "T" [10 PCS], 1/2" Elbows](https://m.media-amazon.com/images/I/51wUp6W07aL._SL500_.jpg)
Coupon copied
