10 Best
Oxygen Sensor Removers
-
Product Highlights- 3 different types of sockets cover various situations of oxygen sensor locations
- Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires
- Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines
- Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- Set includes: 1-pc 3/8” dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” dr. offset crowfoot socket wrench (1-15/16” long), 1-pc m18 x 1.5mm and 1-pc m12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
SHOWview product -
Product Highlights
- Use with your tools: features 3/8-inch or 1/2-inch square drive to fit your o2 sensor wrench drives; for use with ratchet, breaker bar, or hand wrench (driver tools not included); not compatible with impact tools; use this tool in conjunction with the o2 sensor thread chasers to install new sensors easily (thread chaser and sensors not included)
- Contents: this specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6pt x 110mm, 1/2 inch dr x 29mm x 6pt x 90mm, 1/2 inch dr x 22mm x 12pt x 78mm, 1/2 inch dr x 27mm x 12pt x 78mm, 1/2 inch dr x 28mm x 12pt x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6pt x 80mm, 3/8 inch dr x 7/8” x 6pt x 90mm, 3/8 inch dr x 7/8” x 30mm, and 3/8 inch dr x 1” and 1-1...
- Remove oxygen sensors from your vehicle: this 10 piece specialty sockets o2 sensor tool set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches; some o2 socket pieces feature cutout sides to prevent damage to wires and tubes; remove and install parts on most domestic and some international vehicles
- Built to last: constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity; each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion
- Convenient storage: the plastic blow-molded case is included to provide safe storage, fast organization, and easy transportation; case measures at 11.8 x 9.8 x 2.5 inches (29.9 x 24.9 x 6.3 cm) and features locking latches and a comfortable handle
SHOWview product -
Product Highlights
- Wide applications: for removing and installing oxygen sensors and hex vacuum switches on vehicles with computer-controlled engines
- Unique design: special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires
- Package included: 1pc 3/8 inch drive 7/8 inch (22 mm) deep, 1pc 3/8 inch drive 7/8 inch (22 mm) crowfoot, and 1pc 1/2 inch drive 7/8 inch (22 mm) deep crowfoot sockets, 1pc plastic carrying case
- Professional grade: 3/8 & 1/2-inch drive o2 oxygen sensor wrench socket tool. professional grade removal tool for cars & automotive
- Durable & dependable: chrome molybdenum construction and black oxide finish for easy cleanup & rust prevention; comes in sturdy plastic carrying case
SHOWview product -
Product Highlights
- 10 pieces removers and sockets with blue case.
- Remove oxygen sensors; oil pressure sending units and vacuum switches;injectors.
- This oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum swithces and fuel injections. these tools can be used most vehicles.
- Oxygen sensor removers and oil pressure sending units are constructed with heat-treated chrome vanadium steel.it is rust and corrostion resistant.
- 100% customer satisfaction. if any problems, please feel free to contact us.
SHOWview product -
Product Highlights
- ◇ material --- made of high performance chromium-molybdenum and solid cast steel construction for strength and durability - treated with black oxide to prevent rusting
- ◇ package --- 1-pc 3/8” dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” dr. offset crowfoot socket wrench (1-15/16” long), 1-pc m18 x 1.5mm and 1-pc m12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- ◇ design --- the oxygen sensor set, low profile and slotted design allows you to keep the harness connected while removing the oxygen sensor, and the socket is offset and compact for extra leverage even in hard-to-reach places
- ◇ how to use --- designed for use with ratchet and breaker bar, you can remove and install oxygen sensor and hex vacuum switch on your vehicle even if you don't have extensive experience in auto repair
- ◇ prokomon --- we pursue excellent quality and professional technical support. if you are not satisfied with this product or have any questions, please feel free to let us know
SHOWview product -
Product Highlights
- Function: o2 sensor socket tool set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
- Specification: the specification for these oxygen sensor socket set is: 1pc 3/8 inch drive 7/8 inch (22 mm) deep, 1pc 3/8 inch drive 7/8 inch (22 mm) crowfoot, and 1pc 1/2 inch drive 7/8 inch (22 mm) deep crowfoot sockets, 1pc plastic red or blue carrying case.
- Extra durable: constructed of heat-treated chrome vanadium steel, this oxygen sensor remover tool set is built for strength, durability, and longevity.
- Features: 3/8-inch or 1/2-inch square drive to fit your o2 sensor wrench drives, the o2 sensor socket set is designed for use with ratchet, breaker bar, or hand wrench (driver tools not included), not compatible with impact tools.
- Wide application: atpeam oxygen sensor wrench remover tool is a perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
SHOWview product -
Product Highlights
- Chrome vanadium steel construction
- Designed for the removal and installation of oxygen sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes
- 7 pc sensor and sending unit socket set
- Oil rubbed black oxide coating for corrosion resistance
- Blow mold case for storage
SHOWview product -
Product Highlights
- Purpose: the remover set includes sockets and wrenches, oxygen sensors are often located in tight spaces, making it hard to access them, these set can fit over the sensor and provide a secure grip, allowing for easy removal and installation
- Sensor compatibility: this oxygen sensor remover sets come with 3 different size tubes: 3/8 inch drive 7/8 inch (22 mm) deep, 3/8 inch drive 7/8 inch (22 mm) deep, and 1/2 inch drive 7/8 inch (22 mm) deep
- Material: the oxygen sensor remover sets are made of 65# manganese steel materials with black oxide finish that are designed to withstand the torque and pressure required for removing and installing oxygen sensors
- Socket design: the sockets included in an oxygen sensor remover set are typically deep and have a cutout or slot to accommodate the sensor's wiring harness. this design allows the socket to fit over the sensor while still providing clearance for the wires
- Wide application: during routine vehicle maintenance or repair work, an oxygen sensor remover set allows for the easy removal of sensors for inspection, cleaning or testing purposes, helping diagnose and resolve problems
SHOWview product -
Product Highlights
- 3 types of universal socket wrenchs cover various situations of oxygen sensor location
- Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
- 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- Set including: 1-pc 3/8” dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” dr. offset crowfoot socket wrench (1-15/16” long), 1-pc m18 x 1.5mm and 1-pc m12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
SHOWview product -
Product Highlights
- The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots. this quality tool can save your knuckles and time！
- Even if you don't have a lot of experience working with cars, you can replace your o2 sensor with this tool to help with your car's emissions and gas mileage. the sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- 1 pcs 3/8” dr. extra deep broach socket (3-1/8” long), 1 pcs 3/8” dr. low-profile crowfoot socket wrench (1-1/4” long), 1 pcs 1/2” dr. offset crowfoot socket wrench (1-15/16” long), 1 pcs m18 x 1.5mm and 1 pcs m12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- This socket made from premium chrome molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
- If you have any questions, contact with us, we will reply you in 24 hours and offer the solve way for you.
SHOWview product
Coupon copied
