10 Best
Operating System For Raspberry Pi Zero Ws
-
Product Highlights- Usb-hub-box overview: pogo pin design for the hat, compatible with zero / zero 2 w. 4x extended usb ports, usb 2.0 / 1.1 compliant. quality abs material, dull polish surface, anti-fingerprint; angle rounded design, smooth hand feeling, "simple snap" case lid. comes with two different lids, changing as you like
- Mini hdmi port and micro usb on-the-go (otg) port. microsd card slot.csi-2 camera connector. hat-compatible 40-pin header footprint (unpopulated). micro usb power; composite video and reset pins via solder test points. h.264, mpeg-4 decode (1080p30); h.264 encode (1080p30). opengl es 1.1, 2.0 graphics
- This is a usb hub kit for raspberry pi zero 2 w, extending 4x usb ports, the pogo pin design allows the hub hat to be direct connected with zero, and the combination can be stuffed into the dedicated red/white case to build a mini computer, keeping the dust away from your lovely zero.
- Broadcom bcm2710a1, 1ghz quad-core 64-bit arm cortex-a53 cpu. 512mb lpddr2 sdram. 2.4ghz 802.11 b/g/n wireless lan. bluetooth 4.2, bluetooth low energy (ble), onboard antenna
- Please try "zero 2 w series board" with the latest raspberry pi os. (if the system is compatible with "zero w", but not with rpi 3b+, zero 2 w series board will also probably doesn't work.)
SHOWview product -
Product Highlights
- 1.3inch ips lcd overview: standard raspberry pi 40pin gpio extension header, direct connect with zero via soldered pinheader. 1.3″ ips display, 240 × 240 pixels, 65k colorful, spi communication. 1x joystick, 3x pushbuttons, handy and useful
- Broadcom bcm2710a1, 1ghz quad-core 64-bit arm cortex-a53 cpu. 512mb lpddr2 sdram. 2.4ghz 802.11 b/g/n wireless lan. bluetooth 4.2, bluetooth low energy (ble), onboard antenna. mini hdmi port and micro usb on-the-go (otg) port
- Package g consists of a ups hat and an lcd display, it is a solution that allows the raspberry pi zero to work with portable projects. recharge the battery, and take it anywhere you go. surely you can recharge it and run the raspberry pi at the same time, there're multi battery protection circuits on the ups hat to ensure stable and safe operation. recharge it anytime y...
- Ups hat overview:incorporates 1000mah 3.7v 803040 li-po battery, with voltage boost chip, providing regulated 5v power output. spring pogo pin connection design, no more messy wiring. li-po battery recharge chip, with dynamic path management, more stable power supply. i2c bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
- Microsd card slot. csi-2 camera connector. hat-compatible 40-pin header footprint (unpopulated). micro usb power. composite video and reset pins via solder test points. h.264, mpeg-4 decode (1080p30); h.264 encode (1080p30). opengl es 1.1, 2.0 graphics;please try "zero 2 w series board" with the latest raspberry pi os. (if the system is compatible with "zero w", but not...
SHOWview product -
Product Highlights
- Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- Standard raspberry pi 40pin gpio extension header, supports raspberry pi series boards, jetson nano. spi interface, for connecting with other controller boards like /nucleo, etc. onboard voltage translator, compatible with 3.3v/5v mcus.
- This is an e-ink display hat for raspberry pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via spi interface, supports partial refresh.
- No backlight, keeps displaying last content for a long time even when power down. ultra low power consumption, basically power is only required for refreshing.
- Comes with development resources and manual (examples for raspberry pi/jetson nano//stm32).
SHOWview product -
Product Highlights
- 2. in terms of still images, the camera is capable of 2592 × 1944 pixel static images.
- 4. the board itself is tiny, at around 25mm x 24mm x 9mm and weighing in at just over 3g, making it perfect for mobile.
- 1. the sensor has a native resolution of 5 megapixel, and has a fixed focus lens on board.
- 3. it is the latest version 1.3. this is the plug-and-play-compatible latest version of the raspbian operating system.
- 5. connect the included ribbon cable to the csi (camera serial interface) port on your raspberry pi. connect this camera module to raspberry pi 4 3 2 model b b+ a+ and raspberry pi zero v1.3. working fine with raspberry pi and octoprint.
SHOWview product -
Raspberry Pi Zero WRaspberry Pi Zero WRaspberry PiCloseMore Info
-
Product Highlights
- 802.11 b/g/n wireless lan; bluetooth 4.1;1ghz, single-core cpu;512mb ram
- The heatsink is for better heat dissipation and gpio header makes it easy to connect the gpio ports.
- Raspberry pi zero w included --- raspberry pi zero w board is a tiny sbc with bluetooth and wireless connectivity.
- Raspberry pi zero w metal case --- made of aluminum alloy, and access to all ports of raspberry pi zero w.
- Package includes raspberry pi zero w board, a black aluminum case, copper heatsink, switch cable, otg cable, hdmi adapter, gpio header.
SHOWview product -
Product Highlights
- Onboard external usb-c 5v dc power port, ensures more stable power supply
- Driver-free, plug and play, compatible with os including windows, mac os, linux and android
- 4x usb 3.2 gen1 ports, compatible with usb 3.0 / 2.0 /1.1 comes with development resources and manual.
- 1x power indicator and 4x usb port indicators, easy to check the operating status
- Purpose-made for raspberry pi 4, compatible with other raspberry pi version as well
SHOWview product -
Product Highlights
- Sony exmor imx219 sensor capable of 4k30 1080p60 720p180 8mp still
- Maximum of 1080p30 and 8mp stills in raspberry pi board
- Second generation raspberry pi camera module with fixed focus lens
- 3280 (h) x 2464 (v) active pixel count
- 2a power supply highly recommended
SHOWview product -
Product Highlights
- No backlight, keeps displaying last content for a long time even when power down. ultra low power consumption, basically power is only required for refreshing.
- Version notice: the driver board is rev2.1 (version 2.1), which is independent of the screen version. currently, there is only rev2.1 (version 2.1) for the driver board and qc label v4 is for the screen version, qc label v4 is currently being shipped.
- This is 2.13inch e-ink display hat with raspberry pi 40pin gpio extension header, compatible with raspberry pi series boards, jetson nano. 250x122 resolution, black and white two display colors, with embedded controller, communicating via spi interface, supports partial refresh.
- Spi interface, for connecting with controller boards likearduino/stm32, etc. onboard voltage translator, compatible with 3.3v / 5v mcus.
- Comes with online development resources and manual (driver board circuit diagram, examples for raspberry pi/jetson nano/arduino/stm32). please read the online information carefully before using it.
SHOWview product
Coupon copied
