10 Best
Marine Bilges
-
Product Highlights- 【durable construction】the water-cooled motor of the livewell pump prevents overheating during use, ensuring long, steady operation. the robust stainless steel shaft and sturdy thermoplastic body stand up to harsh saltwater and freshwater environments. the anti-air lock design and moisture-proof seals add durability.
- 【easy maintenance】with clear instructions, this pump is easy to clean and maintain. the snap-lock filter base can be installed and removed easily. the boat bilge pump operates without noise or vibration. following the guidance ensures maximum efficiency and long product life.
- 【high efficiency】with a 12v voltage, 1100 gallons per hour flow rate, and the ability to pump 22-234l/min (1.32-14.04 cubic meters/hour), this small-size bilge pump realizes a perfect combination of low current consumption and high flow rate. the bilge pumps for boats should be matched with a 1-1/8 inch pipe when using.
- 【safe operation】the corrosion-resistant abs housing is fully submergible and ignition-protected, meeting current safety standards. the unique auto-discharge feature of the 12v water pump allows continuous operation without burnout, even under nearly clogged conditions.
- 【wide applications】the manual bilge pump is perfect for a wide range of scenarios. whether it's on fishing boats, speedboats, yachts, rvs, tubs, or solar hot water systems. it can also deliver reliable performance in aquariums, small swimming pools, fountains, and other places where drainage is needed.
SHOWview product -
Product Highlights
- All-in-one pump & switch - no float switch required.pump turns on when water level rises & shuts off when water is removed. snap-off strainer for easy cleaning.
- Totally submersible and ignition protected.compact pump for smaller vessels. tough plastic body.limited one year warranty.
- Connections: for 19mm (3/4") bore hose for 600gph &750gph, 29mm hore hose for 1100gph. output: up to 1100 gallons/hour. max. recommended discharge head 2.5m.
- Water cooled motors for long life, with anti airlock design and moisture tight seals.heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
- Can be used with switch panel for manual override.includes comprehensive user manual with installation instructions and wiring diagram.
SHOWview product -
Product Highlights
- 【high flow】: 1500 gallons per hour, 12 volts dc
- 【advantages】built for the harsh marine environment, good for both saltwater and freshwater. the water-cooled engine ensures a long service life.heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge. ignition protection water/moisture tight seals;
- 【1500gph with float switch】the submersible bilge pump with a alone float switch are tough enough for any bilge. use together with a 1-1/8 inch hose.
- 【small but efficient】small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow.
- 【package include】1 x 1500gph pump ; 1 x float switch. (pump and switch are stand alone products)
SHOWview product -
Product Highlights
- Typical uses: suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
- Maximum delivery head: 3. 8 meters (height of vertical water flow up pipe); current draw: 3 amp
- Voltage: 12v dc; flow capacity: 750 gallons per hour (2850 liters per hour) - 47. 5 liters per minute
- Ideal for fishing boats, cruisers, runabouts, yachts, etc
- Built for the harsh marine environment, are suitable to withstand the most adverse condition. the water-cooled engine ensures a long service life
SHOWview product -
Product Highlights
- Wire lead(m): 1m; outlet diameter: 29 mm/(1-1/8)inch; width: approx. 81mm
- No power use until pump is activated by internal float switch (when water level rises)
- Flow rate (gph): 1100gph; volt: 12v; current(a): 3.8a; head(m): 3.0m
- Built-in float switch! (no separate float switch is needed)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
SHOWview product -
-
Product Highlights
- ✔built-in float switch:compact, automatic, fully submersible electric pump,built-in float switch! (no separate float switch is needed)
- ✔durable: all (auto) bilge pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic abs plastic housing.
- ✔specification: flow rate: 1200gph; voltage: 12v; current: 3.5a; head: 2.5m, wire lead: 1m, outlet dia: 28.5mm(1-1/8"), dimension: 155*90*115mm
- ✔long life motor :water cooled motors for long life, with anti airlock design and moisture tight seals.heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
- ✔no power use until pump is activated by internal float switch (when water level rises).pump turns on when water level rises & shuts off when water is removed. snap-off strainer for easy cleaning
SHOWview product -
-
Product Highlights
- 【easy to install】 - mounting hole size of the bilge pump switch is 1.46" (37.2 mm) x 0.83" (21.2 mm), suit for most vehicles boat install or replace. it controls any pump equipped with an automatic float switch.
- 【package includes】 - 1*3 way 20a bilge pump rocker switch and 4*insulated wire electrical connectors, easy to install and use.
- 【3 way bilge pump rocker switch】 - this bilge pump switch features auto/off/manual 3 way 3 position and 4 pins spdt design. it comes with red led light indicator and waterproof board, more convenient for you to use at night.
- 【high quality】 - 3 way 20a bilge pump rocker switch is made of strengthened abs and anti-retardant materials, which makes it more waterproof, shockproof and durable.
- 【wide application】 - universal for all cars, rvs, suv, atv, utv, cans, motorcycles, buses, marine boats, yachts, trailers, jeeps, prerunners, camper, caravans, engineering vehicles, special vehicle etc.
SHOWview product
Coupon copied
