10 Best
Lutron Z Waves
-
Product Highlights- Multi-functional dimmer: smooth brightness control for incandescent and led bulbs (up to 75 watts of leds). smart bulb ready! double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). no direct 3-way, only virtual 3-way available. contact support for details.
- Easy installation: pigtail wires for convenient connections. no side tabs and just 1.1" deep to fit shallow and crowded switch boxes. neutral wire required (check before buying). the device is etl certified and conforms with north american safety standards.
- Smart double switch: control 2 loads independently with just one double switch. dim the lights using the paddles and turn the connected fan on or off using the relay button (no speed control for the fan). control each load remotely from your z-wave hub (required, sold separately). alexa is not a z-wave hub. does not work with z-wave alarm panels like adt, ring, vivint, ...
- Powerful relay: connect any load up to 15a, including ceiling and exhaust fans for reliable on/off control from the relay button and via z-wave. or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).
- Hub compatibility: this is an advanced z-wave device and it requires an open z-wave hub to display correctly. it was tested to work well with hubitat, vera, wink, openhab, and on smartthings with a custom device handler (please go to zooz support page for details). not supported by vivint, adt pulse, ring, or alarm.com
SHOWview product -
Product Highlights
- 4 remote buttons: program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. use the buttons to enter "away" mode on your way out or to turn off all of the lights before you go to bed with a single click.
- Z-wave hub compatibility: most basic z-wave systems aren't advanced enough to allow scene control programming. the zen32 scene controller is supported by: smartthings (with a custom handler, instructions included with the product), hubitat, home assistant, and homeseer. please do not buy this device if your hub isn't listed here, it will not be recognized correctly by y...
- Easy installation: clear diagrams and 7-day a week support included. no side tabs and just 1.1" deep to fit shallow and crowded switch boxes. neutral wire required (check before buying). the device is etl certified and conforms with north american safety standards. backed by a 5-year warranty.
- Main button: connect a 120 v light fixture (up to 150 w for led's) to control it via z-wave or use the main button for wireless control only with up to 7 button triggers available. z-wave hub required, sold separately. note: your smart speaker is not a z-wave hub.
- Direct 3-way solution: no add-on switch needed! works with regular 3-way switches as long as neutral is present. wire it just like the zen21/zen71 models. please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. works great as a single pole switch too!
- New 700 series: this product is built on the latest 700 series z-wave chip for better signal coverage than ever, faster communication, with s2 authenticated security and smartstart for effortless pairing.
SHOWview product -
Product Highlights
- Single location dimming: can be used in single-pole applications only, where lights are controlled from 1 location. 3-way version is stcl-153mw-wh
- Light bar: light bar glows softly to help you find the switch in the dark; touch anywhere on the light bar to access any level
- Personalization: mylevel personalization gives you the ability to customize your sunnata touch dimmer switch you can adjust the brightness of the light bar as well as set a favorite light level
- Led+ advanced technology: tested on 1,000s of bulbs and dozens of brands for superior dimming of led, incandescent and halogen bulbs (for list of recommended bulbs, see compatibility chart)
- Technical specs: works with up to 150-watt of dimmable leds or up to 600-watt of incandescent and halogen bulbs, not rated for low voltage applications (i.e. track or landscape lighting). installs in 3 steps in as little as 15 minutes.
- Includes: (1) sunnata led+ single location dimmer switch and (1) screwless claro wallplate
SHOWview product -
Product Highlights
- Quickfit - improved components reduced the housing depth by up to 20% compared to previous z-wave models and eliminated the need for heat tabs. quickfit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
- Voice control - enjoy the convenience of voice control with google assistant or amazon alexa when connected through a compatible z-wave hub.
- Revolutionary design - quickfit and simplewire technologies offer groundbreaking home automation features. unique advancements make the smart controls easier to install and more reliable than ever.
- Simplewire - patented auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- Switch upgrade - easily replace any standard in-wall switch equipped with a neutral wire to remotely turn on/off and create schedules for a wide range of fixtures.
SHOWview product -
Product Highlights
- Quickfit – improved components reduced the housing depth by up to 20% compared to previous z-wave models and eliminated the need for heat tabs. quickfit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
- Voice control – enjoy the convenience of voice control with google assistant or amazon alexa when connected through a compatible z-wave hub.
- Revolutionary, patent-pending design – quickfit and simplewire technologies offer groundbreaking home automation features. unique advancements make the smart controls easier to install and more reliable than ever.
- Simplewire – auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- Switch upgrade – easily replace any standard in-wall switch equipped with a neutral wire to remotely turn on/off and create schedules for a wide range of fixtures.
SHOWview product -
Product Highlights
- 3-way compatible: unlike many other smart relays, you can use this device to automate 3-way switches as well. keep your favorite wall control style even if it's a multiway set-up. always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.
- Smart bulb mode and more: bring back the switch function to your old switches even when using smart bulbs. the smart bulb mode allows you to control smart bulbs via z-wave without cutting power to them when off. enjoy the 700 series z-wave with powerful features like smartstart and s2 authenticated security.
- Smart double relay: control 2 loads independently with just one double relay. it's perfect for double gang boxes - simply install the relay behind your existing wall switches to make your lights smart. connect to simple on/off or momentary mechanical switches only, not to dimmers or other electronic / smart switches. z-wave hub required, scroll down for details.
- Easy installation: pigtail wires for convenient connections. the relay is small enough to fit in the most crowded box, just 1.5'' x 1.4'' and 0.7'' deep. neutral wire required (check before buying). the device is etl certified and conforms with north american safety standards.
- Hub compatibility: this is an advanced z-wave device and it requires an updated z-wave hub to display correctly. it was tested to work well with hubitat, home assistant (z-wave js), and is compatible with smartthings. this product is backed by us based support from zooz, 7 days a week and a 5-year once registered.
SHOWview product -
Product Highlights
- Advanced design 2nd generation model – improved components reduced the housing depth by up to 20% compared to previous z-wave models and eliminated the need for heat tabs. quick fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. auto line-load sensing terminals support fast a...
- Full-home coverage – z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network. the dimmer is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your z-wave signal from your hub or other devices to extend your range by up to 150ft. extended signal range increases your home aut...
- Voice control – alexa and google assistant compatible (requires a z-wave certified hub). works with the following z-wave certified hubs: smartthings, ring alarm, wink, adt pulse, adt command, trane, vivint, nexia, honeywell, homeseer, harmony home hub extender, vera and more.
- Versatile applications – control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual on:off operation and brightness adjustment from the dimmer. home automation is simple through custom scenes, personalized scheduling and convenient alerts. the smart device operates perfectly on its own or seamlessly integrates ...
- Easy installation – requires indoor in-wall installation with hardwired connections. neutral wire required. wallplate not included. full-range dimmability for use with dimmable leds and cfls as well as incandescent and halogen bulbs. supported wattage – 600w incandescent; 300w led, cfl. supported voltage – 120vac. operating temperature range 32-104 degrees fahrenheit.
SHOWview product -
-
Product Highlights
- New 700 series z-wave: boost your network with the latest z-wave technology that offers more range and faster communication speed than ever before. each dimmer will act as a signal extender making your smart home mesh reliable. and if you need to troubleshoot connectivity issues, access the built-in range test tool straight from your switch!
- Better fit: the new model is just 1.16" deep so it's easier to install it in a shallow or crowded box! there are no heat sink tabs either, just place it next to the other switches in a multi-gang box. and if you need a different color paddle, just ask zooz for light almond, brown, or black options (not included, sold separately) - the white paddles can be replaced.
- Latest security: equipped with the new s2 authenticated security protocol and smartstart for instant and safe pairing. z-wave plus and etl certified for communication and safety standards compliance. lifetime tech support.
- Z-wave dimmer: turn your lights on or off and dim them from the switch or in your hub's app. please use quality dimmable bulbs for best results (avoid big-box store brands). hub required (sold separately), scroll down for compatibility. voice control with z-wave hub only (will not work directly with your smart speaker).
- Direct 3-way: wire it just like the zooz zen22 model. use it with existing on/off switches (no dimmers) in a 3-way set-up, no need for add-on switches. please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. works great as a single pole dimmer too! neutral wire required (check your boxes before buying).
- More features: double tap to go from off to full brightness (single tap to last brightness level - now fully programmable if your hub supports advanced settings). disable the relay and use the dimmer as a remote control for your smart bulbs, multi-tap triggers (aka scene control) available for if you have access to advanced features from your hub.
SHOWview product -
Product Highlights
- Uses advanced xct sensing technology, offering the most reliable on/off performance with up to 900 square feet coverage.ambient operating temperature: 32 °f to 104 °f
- Works with all bulb types
- Automatically turn lights on and off based on room occupancy
- Up to 250 w incandescent, halogen, electronic low voltage; 200 w magnetic low voltage; 150 w cfl/led; or 2 amp ballasts
- Package includes (3) maestro sensors. coordinating claro wallplates sold separately
SHOWview product
Coupon copied
