10 Best
Lcr Meters
-
Product Highlights- 🔨[built-in with a 5v for power supply, which combines the convenience of a handheld instrument and good performance of a table-type one.
- 🔨[its automatic range can display the results in the fast, medium, or slow mode.
- 🔨[a portable handheld lcr meter for measuring the parameters of inductors, capacitors, resistors and other components.
- 🔨[up to 100khz of frequency measurement, and 0.6vrms, 0.3vrms switchable of level measurement, and the measurement accuracy can reach 0.3%.
- 🔨[automatically select the appropriate measurement parameters according to the characteristics of the component.
SHOWview product -
Product Highlights
- 5 frequency tests selectable (100hz/120hz/1khz/10khz/100khz)
- Loss factor (d), quality factor (q), phase angle (θ), equivalent series resistance (esr), equivalent parallel resistance (epr) and dcr dc resistance measurements.
- Lcr meter is more advanced meters used to measure inductance, capacitance and resistance.
- Advanced features include series/parallel measurement modes, quality factor/loss/phase angle measurements, equivalent/dc resistance measurement
SHOWview product -
Product Highlights
- Size specification --- esr capacitance meter is a series resistor inside capacitor, using 100khz to remove the impedance 1/(2*pi*f*c).
- Condition --- using this theory, we can measure the capacitor is bad/ damaged or good in condition. dual terminal, for fast and easy inspect general capacitor or resistor, a printed esr table for fast check.
- Suitable for --- during repairing tv, lcd, audio board, etc. we can in circuit testing the capacitor is good or not.
- Size specification --- esr capacitance meter is a series resistor inside capacitor, using 100khz to remove the impedance 1/(2*pi*f*c).
- Accurate measurement --- the impedance become small, and we can then measure the true series resistor value.
- Wide application --- our esr meter only applies less than 15mv dc or peak to peak on a good capacitor, as a result we can use mesr-100 meter as in circuit test.
SHOWview product -
-
Product Highlights
- Wide range of selectable test frequencies: 100 hz / 120 hz / 1 khz / 10 khz / 100 khz
- Measure: resistance, capacitance, inductance, d,q & phase
- Replaced by the more accurate de-6000
- Allows for 4-wire kelvin measurement to factor out impedance of test leads
- Backlit 20,000/2,000 count display
SHOWview product -
Product Highlights
- Line iso 9001 auto l.c.r. check 100 / 120 / 1k / 10k / 100k hz test frequency 20,000 / 2,000 counts
- Mode series / parallel modes components sorting function
- This set includes de-5000 itself tl-21 alligator test lead case tl-22 smd
- Counts display backlit ls / lp / cs / cp / rs / rp / dcr with d / q / θ / esr measurement relative
- Selectable tolerance ±0.25%, ±0.5%, ±1%, ±2%, ±5%, ±10%, ±20%, -20% +80%
SHOWview product
Coupon copied
