10 Best
Iphone 6 Plus Window Mounts
-
-
Product Highlights
- 👍 auto lock, no more fall :this gravity slide-in car phone holder creatively features the auto-lock arm-slots that stretch on the side can auto adjust to hold phone more firmly without fears of bumps, special curve of arms fit phone better. the phone was all-round protected by silicone rubber on the inside clamps. note:maximum thickness of device is 14mm (0.5in).
- 👍 universal compatibility: this universal car cell phone holder will firmly hold all the smart phones (4-7in) even with thicker case (≤14mm) compatible with iphone 15 14 13 12 pro max/ 11 pro max/xr/x/8/7/6/5, note 20 10/ galaxy s10+/ s9/ s8 /s7 /s6 and more. note:we recommend using the smaller phone(＜4.7inch) with phone case
- ❤️we care for you❤️: this item comes with friendly customer service. please 💌email the ainope-authorized store first for a solution, we will be sure to provide a satisfying solution for you.
- 👍 the easiest operation & just slide in and go: just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation and a strong stable hold without button to press. easy to drop phone in and pick phone up with two fingers.
- 👍 2024 upgraded air vent hook: this car vent phone holder mount is designed as "hook shape" and form "three grasp points" which can firmly hook around the a/c vent for no slippage or movement. it solving the market's common problem of falling forward and off the air vent constantly when going over bumps or turns. note: the length of clamp between 0.41-0.98in. this phone...
- 👍 no block vent & safer driving: this car vent phone mount with folding back structure is very neat and keep it small when not in use, only 1/2 card size and 3 inches away from the vent to still allow air flow. you can have a wider sight and adjust this gravity car phone holder up/down or left/right. note: the horizontal mode is not supported.
SHOWview product -
Product Highlights
- 【flexible long arm&anti-shake stabilizer】the 13 inches ultra-long arm of this ipad car dashboard mount is made of thick rubberized aluminum, which is not only sturdy and flexible, but also can be bent into any shape as you wish to suit the position you place it. and this long arm is equipped with a mini smart stabilizer, which can effectively reduce vibration during dri...
- 【360° rotation clamp & telescopic arm】thanks to the rotating swivel ball can this suction cup tablet mount gooseneck holder 360 degrees rotated, the bendable sturdy arm can be adjusted to 180 degrees, which not only brings you closer to your tablet but also meets your perfect viewing angle(horizontal and vertical) without blocking your sight. whether you are navigating,...
- 【solid construction & lifetime warranty】the high temperature resistant tpu and pvc materials make ipad dash windshield mount sturdier than other pure abs mounts. we strive for excellence with our products and our customer service. if there is any quality problem with our window dashboard arm tablet holder or you are not happy with your purchase in our store, please feel...
- 【broad compatibility】the adjustable side clamps (0.9" thickness) of this 2 in 1 car windshield tablet mount holder can be extended from 4.7" to 9.2", compatible with all 4.7 - 12.9 inch smartphones and tablets, such as ipad pro 9.7/10.5/11/12.9, ipad air 2/3/4/5, ipad mini 1/2/3/4/5/6, iphone 14/14 pro/14 pro max, iphone 13/13 pro/13 pro max, iphone se, iphone 12/11/xs/...
- 【reusable suction cup & adhesive dashboard pad】super strong vacuum suction cup features a layer of sticky gel and one-step locking system can maximize the stability and secure the tablet arm mount in place. the suction cup is reusable and washable, if it gets dirty or loses its grip, simply rinse in water and let air dry to restore the stickiness. come with an optional ...
- 【full protection & hassle-free charging】due to the soft sponge pad on the clip can this universal tablet holder for car dashboard not only protect your tablet or phone from scratch and collision, but also prevent your devices slipping from ipad tablet holder when driving on the bumpy road. the middle hollow design of the clip makes a hassle free charging. with a quick-r...
SHOWview product -
Product Highlights
- The easiest operation and just slide in and go: this car phone holder air vent clamps the phone automatically by gravity. no need to be distracted by the complicated-handed locking steps anymore, it takes seconds to place and take! ugreen phone holder for cars realizes true hands-free for switching music and setting navigation routes during the driving journey
- Important note: not work for the 2022 toyota camry. this car vent phone mount supports 4.7" to 7.2" cell phones. for phones with thin cases, the total maximum thickness is 0.55-inch. it's compatible with iphone 15, 15 pro, 15 pro max, 15 plus, iphone 14 pro 14 plus 14 13 12 11 pro max, iphone se, iphone xs xr x 8, galaxy note20 s23 s22 s20 ultra s10 plus s9 note 9 8, lg...
- 360° swing arm, enjoy the comfort of the a/c: gravity iphone car holder with a folding back structure that never blocks the vent and stays small when not in use. with the unique extension arm and 360° free angle adjustment, this car mount can make your phone avoid the influence of a/c airflow (no damage to the life of the phone), and can also help you get the comfort br...
- Vent holder expert, hook the vent stably: 2023 upgraded metal-embedded hook can firmly hook the vent blades, which forms a three-point mechanical support with the baffle to provide double protection for your mount. even on bumpy roads, sharp turns, speed bumps, emergency brakes, and other steep road conditions, it won't slip or fall off, protecting your travel safely. c...
- Scratch-free: premium silicone pads on the phone cradle ensure you more sturdy and safer phone clamping, without falling off for long-term use and effectively protect your cellphone from scratches
SHOWview product -
Product Highlights
- Flexible aluminum gooseneck: this car phone holder mount is aluminum, up to 15cm, can bend, strong flexibility, suitable for most irregular dashboard, the gooseneck is attached to the surface of the dashboard, breaking the form of the car phone mount standing on the dashboard without blocking the view
- Sponge pad protects the phone from scratches: sponge pads are attached to the inside of the car phone mount, which can effectively protect the phone and prevent scratches
- 【 kindly note】1.it is recommended to install the dashboard/windshield car phone mount on a smooth, flat and clean surface;2.peel the protective film from the suction cup and dashboard pad before use;3. for stronger viscosity,allow the dashboard pad to sit for 24 hours after installation;4. not recommended to install the car phone mount on too rough or curved dashboard s...
- Washable sticky gel powerful suction cup：the super vacuum suction cup of this car phone holder mount with a sticky layer of gel, can maximize the stability of the suction cup, keep the lock button on the suction cup in the raised state before installation, and press the lock button after installation, if the suction cup is dirty or loses stickiness, just wash it with wa...
- Compatible with 4.7 to 6.9-inch mobile phone: by pressing the button of the side, this car phone holder mounr's clarm arm can be extended to 93mm / 3.7in, compatible with a mobile phone with 4.7 to 6.9, including almost all models on the market, for example iphone series, samsung series, lg series, google series, etc.
- 360 degree rotation: this car phone holder mount adopts a ball joint design, which can be rotated 360 degrees to find a comfortable viewing angle to ensure safe driving
SHOWview product -
Product Highlights
- 【wide scenarios application】can be adsorbed to any smooth surface like car windshield or window, outdoor street glass, tile place, desktop, white wall (not concrete wall) and more
- 【humanized design】 fully consider storage and carrying, foldable and portable. when not in use, please do not engage the buckle to prevent damage to the performance of the action camera suction cup; note: static load should not exceed 600g
- 【360° adjustment】double ball structure, 360° angle adjustment; can adjust the angle according to different usage scenarios and shooting needs
- 【strong suction and stable】using elastic resin, large(93mm/3.66in) suction force, all-in-one design main body, makes it stable and reliable, press the button can makes the pressure difference, stay stable even at speed up to 120km/h with go pro mounted
- 【with phone clip wide compatibility】works with dji osmo pocket 2, osmo action 2, osmo pocket, go pro hero 12/11/10/9/8/7/6/5, go pro max, insta360 one x2, insta360 g02, one r, 1 i inch and other action cameras, iphone cellphone, mobile phone, microphone, photography camera video lights, sony nikon canon slr mirrorless cameras etc.
SHOWview product -
Product Highlights
- Adjustable clamp can hold devices up to max 3.54 inches (90mm) for width, fits most types of phone .red rubbers on clamp can well protect your phone not damaged. you can use this phone mount if you have a pop socket on the back of your phone.you don't need to remove pop sockets and the clamp will avoid to damage it.
- No glue suction cup windshield holder, can last in hot summer. note: it can't be used to car dashboard. the non-sticky suction cup can suck to windshield/glass sturdily as sticky one does. what’s more, it will work in hot weather, because its suction will last in high temperature while the sticky suction cup may lost stickiness and stop working.
- Extremely strong suction with switch for quick use, well adhere to your windshield. easy to install and no tools requires.
- Adjustable durable arm:withthe vacuum suction cup uses stronger better spring lock inside which won't break. it will stick tighter to the windshield or dashboard.full 360 degree rotation with a adjustable clamp head, you can adjust your phone for good viewing.
- Ivoler update version 6 inches long arm/neck car mount with strong suction of three layers and x clamp, provide you perfect viewing angle while driving your vehicle. compatible with iphone x 8 8 plus 7 7 plus 6 6plus 5 se , galaxy s5 s6 s7 s8, google, lg, huawei and almost all for any device's diagonal screen between 3.2--6.0 inches.
SHOWview product -
-
Product Highlights
- 【unique two grips design】this vent phone mount has two vent clips on the back, which ensures that it will not suddenly come loose while driving. more tightly than only one grip type.
- 【no scratches】the phone car clip is padded with rubber cushions that protect your phone as well as air vent from scratches.
- 【wide compatibility】this car phone holder fits 4.7-6.5 inches smartphones, like iphone 12 mini 11 pro xs max xs xr x 8 plus 8 7 plus 7 6s plus 6s 6 se, galaxy s10e s10+ s10 s9+ s9 s8+ s8 note 9 8, lg, moto, google pixel, moto.
- 【secure & easy to use】the retractable phone clamp will hold the phone securely and prevents it from falling off while driving, even on bumpy roads. easy to insert and remove your phone with one hand.
- 【lifetime guaratee】 one lamicall car mount, as well as our lifetime warranty service. offering you a full refund or a brand new replacement if you are not satisfied with it
SHOWview product -
Product Highlights
- One-handed operation: a quick-release button on the back of the car phone holder's clamp allows you to operate your cell phone by a single hand.
- Broad compatibility: the clamp of 1zero phone car holder can be open to 4 inches, compatible with iphone 15promax 15pro 15lus 15 14promax 14pro 14plus 14 13promax 13 pro 13 13mini 12promax 12pro 12 12mini 11promax 11pro 11 xs xr x se 10 8 plus 7, cellphone car holder mount for samsung galaxy s23 ultra s23+ s22 ultra s22+ s22 s21+ s21 s20 fe s20+ s10 s10+ s10e s9 s9+ a91...
- Upgraded universal car truck phone holder: 1zero car truck phone mount has a 14 inches durable aluminum pipe that will work perfectly for most vehicles trucks suvs and cars, and will hold your mobile phone securely and close to your finger in your line of sight.
- Flexible phone holder for your safe driving: not just rotatable and tiltable like other car phone mount, it can also be bent to any angle or shape for your easy operation and optimal viewing. hands-free car phone holder either in landscape or portrait mode for easy navigating, calling, and music in the vehicle.
- Built to last bff for you: it is a multi-purpose gooseneck phone holder stand, will mount securely on most flat surfaces such as window, desk, nightstand, cabinet, and table, that will free your hands for watching movies, shooting live, browsing recipes, or making a video call, etc. packages included: 1 x car phone holder, 1 x suction cup base, 1 x anti-shake stabilizer...
SHOWview product
Coupon copied
