10 Best
Infrared Repeater For Cable Boxes
-
-
Product Highlights
- Easy to use - plug the usb into your tv, set top box or a 5v wall adapter(adapter not included) for supply power, then paste the ir emitter(small end) using it's own adhesive over on the device with an ir sensor you wish to control(up to 10cm/3.9inch).lastly, place the ir receiver(big end) end in the line of sight of your remote control (up to 10m/ 32ft).
- Excellent signal range - 180 degree ir receiving angle provides enough space for your remote control to get the right angle. the remote control signal receives a real-time response and moves forward quickly without delay.
- Ir remote control - simplify your entertainment center by hiding your cable box, receiver, amp, roku & other ir controlled devices hidden behind cabinet doors and a wall. no more boxes placing on the shelf or leaving cabinet doors open when your watching tv just so you can use your remote control!this was a very economical and effective way to make it happen.
- Wide band technology - 20-60khz,works on most infrared control devices(not rf)! suitable for infrared remote control, infrared extender, dvd player, stb box,cisco,directv,roku, sony, yamaha,etc.
- Hidden devices - devices that require remote control must be placed where you cannot directly control your remote control. otherwise, the signal from the remote control and the forwarded remote control signal will be sent to the set-top box at the same time. signals out of sync can interfere with each other and cause them to stop working.
SHOWview product -
Product Highlights
- 50 ft range from remote control to ir receiver. high immunity to ambient light and noise
- Please check your device to be sure you have a 3.5 mini input port labeled ir.
- 6 ft shielded cable, 3.5 mini plated stereo plug. tip-vcc 5v, center-data, lower-ground
- Highly reliable with high sensitivity for wide range. works great with our int422 remote
- Works with all 38khz & rc6 remotes and most boxes with an ir port.
SHOWview product -
Product Highlights
- Remote control transponder : the receiving end line is 1.4 meters long, and the transmitting end line is 2 meters long. note : the transmitting end is a two-core line. wide frequency reception 20-60khz. comes with stickers.
- Operation instructions : insert the "usb plug" into the set-top box, tv, mobile phone charger, etc. (this product uses 5v power supply). point the "transmitter" at the receiving window of the set-top box, receiver, dvd, etc. to be controlled by remote control (some devices will be marked with characters such as r, ir, and irf). place the "receiving end" in a suitable po...
- It is suitable for hidden set-top boxes or shared use of set-top boxes in homes and hotels, other network set-top boxes, satellite pan set-top boxes, satellite receivers, dvds, hard disk players, iptv, karaoke remote song orderers, hard disk video recorders for monitoring, hotels/hotels/bathing centers or home set-top box hidden installation, air conditioner and other e...
- Warm reminder : the set-top box (or other devices that require remote control) must be placed where your remote control cannot directly control it, otherwise the signal sent by the remote control and the forwarded remote control signal will be sent to the set-top box at the same time. the signals are asynchronous and will interfere with each other and cause normal use!
- Installation method : stick the transmitting end near the remote control receiving window of the home appliance; stick the receiving end to a position where it is easy to receive the remote control signal (the receiver should face the transmitting direction of the remote control, the direction is too biased to affect the receiving effect); finally, insert the it can be ...
SHOWview product -
Product Highlights
- Function:ir receiver can receive wide frequency, which allows users no longer because of remote control receiving frequency mismatch caused by remote control is not sensitive or can not control.
- Standard specification:ir receiver extender is manufactured according to the professional production specifications, in line with strict quality standards, and are reliable in use.
- Application:this usb ir receiver is suitable for home, hotel and other set-top boxes hidden or shared use of set-top boxes.
- Need different need:the receiving end has a length of 1.4 meters and the transmitting end has a length of 2 meters.the user can cut it off and lengthen to the required length.
- Strict quality test:all the products are tested based on high quality standard before into the market. we are confident with our product, please buy with confident.
SHOWview product -
Product Highlights
- ▲★◆it can receive wide frequency, which allows users no longer because of remote control receiving frequency mismatch caused by remote control is not sensitive or can not control
- ▲★◆the receiving end has a length of 1.4 meters and the transmitting end has a length of 2 meters. the user can cut it off and lengthen to the required length
- ▲★◆this usb ir receiver is suitable for home, hotel and other set-top boxes hidden or shared use of set-top boxes. install the ir transmitter end in a concealed equipment closet to hide a catv box and control it remotely
- ▲★◆great compatibility with a wide range of equipment, devices, stb set top boxes. 180 degree ir receiver angle provides plenty of leeway to get the right angle with your remote. remote control signal receiving real-time response to fast forward without delay
- ▲★◆we've been working in electronics for years and accumulated rich experience, and now we want to share our products'preferences and ingenuity for you to bring you a more fashionable and artisticlife experience
SHOWview product -
Product Highlights
- [wide frequency] this ir receiver can receive wide frequency, which allows users no longer because of remote control receiving frequency mismatch caused by remote control is not sensitive or can not control.
- [wide compatibility] this usb ir receiver is suitable for home, hotel and other set-top boxes hidden or shared use of set-top boxes.
- [improve sensitivity] with this ir receiver, the remote control signal could be easier received by the tv or set-top box.
- [usb] support tv, set-top box with usb interface, please note that the usb port has only power function, it doesn't have data function.
- [service guarantee] if you have any questions about this infrared remote control range extend cable, please feel free to contact us.
SHOWview product -
Product Highlights
- ★ universal compatibility – suitable for a broad range of 38-56khzinfrared devices with an ir input port and remote control such as av equipment and cable stb boxes.
- ★ clean look:our ir repeater system is ideal for those who want to conceal their a/v component equipment inside a closet or cabinet for a clean, stylish look.
- ★ plug and play–our ir extender cable is easy to install and use. just plug the 3.5mm jack into an ir input port of the device.
- ★ 10ft cable – 10 feet longcable with 3.5mm plug allows you to extend the signal receiver to a suitable position.
- ★ flexible+ risk-free purchase–you can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. if for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money! don’t check the next listing! just order now!!!
SHOWview product -
Product Highlights
- ★ universal compatibility – suitable for frequency of 38-56khz infrared devices with an ir input port and remote control, such as cable boxes, set-top box, car-mounted dvd, car audio system, hard disk player, dvr, pvr, satellite receiver, etc.
- ★ clean look – our ir repeater system cable is ideal for those who want to conceal their a/v component equipment inside a closet or cabinet for a clean, stylish look. epoxy resin packaging type and shell can filter visual interference.
- ★ plug and play – our ir extender cable is easy to install and use. just plug the 3.5mm jack into an ir input port of your device, realize the reception and amplification of infrared remote control signals immediately, no extra power required.
- ★ 10ft cable – 10 feet long cable with 3.5mm plug allows you to extend the infrared signal into 49.21ft, horizontal half angle 45 degrees, self-adhesive backing let you paste on wall and remote control all devices with a ir range of 38-56khz.
- ★ flexible+ risk-free purchase – you can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. if for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money!
SHOWview product -
Product Highlights
- Cable length from usb to receiver: approx. 137cm53.94 ". cable length from receiver to transmitter: approx. 198cm 77.95 "
- Install: 1. use the double-sided tape to keep the receiver in a convenient location. 2.stay the infrared emission head on the device you want to control
- Suitable for all remote controls
- The way to power: household appliance or usb 5v power supply. power supply via 5v usb cable
- Your complete satisfaction is our ultimate goal. if you have any questions, please feel free to contact us.
SHOWview product
Coupon copied
