9 Best
Hot Water Boiler Furnaces
-
-
-
Product Highlights
- Meets or exceeds all boiler manufacturer nitrite warranty requirements.
- Each one gallon bottle treats 300 gallons at 1500 ppm
- Protect your wood boiler from rust, corrosion, and scale! offers -3 levels of protection
- Balance ph and alkalinity confidently
- Works with stainless steel, mild steel and boiler plate
SHOWview product -
Product Highlights
- 2.【wide application】: it is designed special for heating system and it can be used to supply water and add pressure for mansions of city, villa of suburb, house, to match with insdustrial equipment, to supply water in cycle for cooling air-condition, boiler and solar energy, supply hot water and keep warm in cycle, etc.
- 4.【material】: the pump is equipped with a cast iron head, aluminum housing, pp impeller, ceramic shaft, ceramic bearings
- 1.【specific】: voltage: 110v/60hz; max flow: 14.5/11.3/8.4gpm;max head: 19.6/16.4/9.8ft;inlet/outlet: 1’’
- 3.【features】: the pump is treated with special anti-rust treatment, high temperature resistance, corrosion resistance, anti-fraying,long life,no rust. no leakage, low noise, environmental protection, beautiful appearance, convenient installation, run responsible and so on.
- 5.【forbidden fluid】: dangerous liquid which contains solid particles, fibre or oil stains is not allowed. explosive, mucous or corrosive liquid is forbidden. fluid temperature range: 0-100℃(0-212℉);ambient temperature: permissible up to 40℃(104℉)
SHOWview product -
Product Highlights
- The bearings are lubricated by the pumped liquid
- Cast iron pump housing.
- The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing
- Hp: 1/25, the pump has 3-step speed selector
- The motor is a 1-phase motor. no additional motor protection is required.
SHOWview product -
Product Highlights
- Simple installation: the product is equipped with installation fittings, no need to purchase separately - standard 3/4" npt flange, matching 2 gaskets and 4 nuts and 4 bolts. simple operation, a wrench can connect the pump to the pipe, saving additional labor costs.
- Durable materials: heavy-duty cast iron pump head and pump casing, pes impeller, ceramic bearing,which provide excellent defense against to rust, corrosion, abrasion and high temperatures- maximum pressure :145psi (10bar)& maximum temperature : 230°f; our pump motor is equipped with a full copper coil, ensuring powerful and consistent performance.
- Adjustable three gears : manual adjustment design-55/90/130 w three-speed control (max.flow rate: 13 gpm). head range: 9.8/18/24 ft.efficient and quiet operation, water comfort while keeping noise away from your family.
- Economical and energy saving: our circulation pump (max head : 24 ft) features high efficiency and low consumption.the powerful water pump provides stable and continuous pressurization of the tank pressure, so you can enjoy hot water in a few seconds, less cold water waste and less waiting time for hot water.maintenance free - no mechanical seals and couplers to replace.
- Wide application: circulation water pump suitable for residential, commercial hydronic radiant heating and plumbing, air conditioning, boilers, solar circulating water, snow melting, circulating heating, floor heating, forced air heating, domestic heating, radiant heating, hot water circulating warm and so on.
SHOWview product -
Product Highlights
- 【premium material】our heat exchangers are supported by steel shells, and the edges and contact points are base brazed, which is very solid and not easily affected by high pressure and temperature. copper and aluminum are highly conductive materials, which make the heat exchanger have good performance and economy in heat transfer and cooling.the fins are coated with epox...
- 【convenient installation】this new type of heat exchanger is easy to install, with a variety of options available. it can be directly connected to the pipeline and fixed with clamps; it also can be directly welded to the pipeline and adapters or be connected with rivets to meet meet a multitude of installation needs.
- 【excepetional performance】the heat exchanger has a capacity of 80,000 btu. depending on the application, the heat exchanger can produce up to 360kbtu of heat per hour, with 12 aluminum fins and 3 rows of 3/8" seamless copper tubes per inch. the combination of wavy fins and seamless copper tubes, which enhanced contact areas both inside and outside the tubes, results in ...
- 【energy-efficient and affordable】our water-air heat exchangers allow for water-air heat exchange movement through a variety of sources - boilers, solar panels, etc.this means you can utilize a variety of renewable energy sources and save energy.
- 【multiple applications】water-to-air heat exchanger offers a high level of thermal efficiency and durability in a compact & lightweight unit, which maximizes space saving, suitable for outdoor wood furnaces, residential and commercial heating and cooling, hybrid systems, air conditioning, inverter cooling, and so on.
SHOWview product -
Product Highlights
- Simple installation: the product is equipped with installation fittings, no need to purchase separately - standard 1" npt flange, matching 2 gaskets and 4 nuts and 4 bolts. simple operation, a wrench can connect the pump to the pipe, saving additional labor costs.
- Durable materials: heavy-duty cast iron pump head and pump casing, pes impeller, ceramic bearing,which provide excellent defense against to rust, corrosion, abrasion and high temperatures- maximum pressure :145psi (10bar)& maximum temperature : 230°f; our pump motor is equipped with a full copper coil, ensuring powerful and consistent performance.
- Adjustable three gears : manual adjustment design-55/90/130 w three-speed control (max.flow rate: 13 gpm). head range: 9.8/18/24 ft.efficient and quiet operation, water comfort while keeping noise away from your family.
- Economical and energy saving: our circulation pump (max head : 24 ft) features high efficiency and low consumption.the powerful water pump provides stable and continuous pressurization of the tank pressure, so you can enjoy hot water in a few seconds, less cold water waste and less waiting time for hot water.maintenance free - no mechanical seals and couplers to replace.
- Wide application: circulation water pump suitable for residential, commercial hydronic radiant heating and plumbing, air conditioning, boilers, solar circulating water, snow melting, circulating heating, floor heating, forced air heating, domestic heating, radiant heating, hot water circulating warm and so on.
SHOWview product -
Product Highlights
- 【high quality materials】the hot water circulation pump is made of heavy duty cast iron,which features high efficiency with low consumption. high temperature resistance, anti-fraying, high flow and leak-tightness. super silent, environmental friendly, saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as...
- 【easy to install】just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction).
- 【product specification】voltage/frequency: 115v, 60hz. rated power: 93/67/46 w. max pressure: 145 psi (10 bar),maximum temperature: 230f.the hot water circulation pump with three-speed control. flow: 5.3/11/15 gpm. max head range: 9.8/18/24 ft. inlet/outlet: npt 1inch.
- 【considerate design】the water circulation pump directly used in hot water recirculating.it can prevent pipes from freezing in winter, especially for cold winter areas. in addition, if your pipes pass through the floor, the floor will also become warm.
- 【widely application】the 3-speed recirculation pump is suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm,ect.
SHOWview product
Coupon copied
