10 Best
Hot Air Stations
-
Product Highlights- 【quick heating】:temp (max):500℃/932°f, (temperature range: 100 ℃/212 to 500 ℃/932°f) noises:<45db, temperature range:±1℃/±2 °f.it has temperature memory function( if turn off the station at 400°f, it will auto heat up to the 400°f when turning on again). very convenient and simple to use, reducing trouble and improving work efficiency.
- 【airflow adjustable】: big lcd digital displays to show precision temperature for a hot air gun, airflow (f1- - f8) is adjustable, and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. air output is stable for different work, moderate volume, no excessive noise. the handle placement rack can be installed according to persona...
- 【safer hot air gun】: made by upgrading the ceramic heating core, the handle housing is made of flame-retardant material. the heat gun handle will enter the overheat protection and automatically cut off the power to prevent the handle temperature from being too high.
- 【air-gun stand-by function】: the air gun automatic function is a safety measure that ensures the heat is automatically cut off when the air gun is in its holder. when you pick up again, the temperature rapidly rises, and it can reach the set temperature only within 3-5 seconds.
- 【what you get】:package included - 1x 858d soldering station unit 1x hot air gun 3x air nozzles 1x solder sucker 1x mini screwdriver 2x tweezers 1x knife 1x ic extractor 1x manual. offer 3 years brand after-sales service support.newacalox 858d desoldering station has a fuse and uses an insulated triangular plug(we have used the correct ground power cord. if you receive t...
SHOWview product -
-
Product Highlights
- The products adopt closed loop of transducer. mcu intelligent drive. digital led display. high-power. the temperature turn up is very fast.
- This product is 110v 60hz, please make sure your address is using 110v voltage ,please make sure that the power cord is tightly connected to the machine.
- 2 in 1 smd hot air rework station and soldering iron.
- Designed for soldering or de-soldering soic, chip, qfp, plcc, bga and other temperature sensitive components, essential tool for cell phone repair, laptop repair, or circuit boards soldering.
- The packing include: 1 * 2 in 1 solder station, 12 * solder tips, 1 * 6in1 bga tools, 1 * desoldering pump, 2 * tweezers, 1 * soldering iron heater, 1 * hot air gun heater, 1 * ic puller, 1 * 100g solder wire.
SHOWview product -
Product Highlights
- 3 preset channels – save your regularly used settings into three preset channels and jump between channels with just one press. you no longer have to adjust the temperature over and over just for components and solders with different temperature parameters.
- Advanced functions & safety features– an in-holder standby function to help cool the hot air gun when it is not in use, preserving your hot air gun in mint condition for longer. equipped with yihua’s exclusive hot air gun fail-safe function to make your work safer, and effectively prevent the risk of any fire hazards.
- Quick heating & well-built – the hot air gun heats up rapidly when picked up from the holder thanks to the improved heating element and heating system design. plus, the control panel is made with solid & brushed aluminum to prevent leaving burnt marks by accident.
- High performance – want a bit more 'oomph'? we got just what you're looking for. our rework station is capable of putting out 120l of hot air at a maximum stabilized temperature of 932°f. with this station, you can conduct rework operations on a broad range of components.
- Choose yihua with confidence- this product includes quality accessories and tools to provide an optimal experience for your work. 12-month usa warranty (exclusive). plus, our team is providing professional assistance 24/7 right on amazon. questions and suggestions are welcome. note: spare parts are readily available in this store. this model works on 110-127v with its u...
SHOWview product -
Product Highlights
- Adjustable airflow: this hot air soldering station can deliver air flow up to 120l/min when when it reaches the max. temperature of 480°c. you can also tailor the airflow to your specific needs with 8 adjustable levels, ensuring precision and efficiency.
- Auto-sleep hot air gun with removable holder: it incorporates an in-holder standby function that cools the soldering heat gun when not in use, prolonging the life of the rework station and heat gun, and effectively prevent the risk of fire hazards. you can also install the soldering heat gun holder on the left or right side that suits you best.
- Hot air rework station with fast heating: has-d hot air station features a quick heating process once you remove the gun from its holder, and can keep a stable temperature for high-quality work with the enhanced heating element and heating system design.
- Low-noise design: the hot air gun soldering station features a brushless motor, ensuring it runs with minimal noise while still providing a strong yet smooth airflow.
- Versatile application: with this station, you can perform rework operations on a wide range of components, including soic, qfp, chip, plcc, bga, and more.
SHOWview product -
Product Highlights
- 【anti-static safety &fail-safe protection design】the esd safe design can help prevent static or leakage damage to components. the soldering station is upgraded and exclusive safety design. if the hot air gun stops blowing abnormally during use, the program will automatically alarm and cut off the power supply of the heating element to ensure safety.
- 【3-in-1 design space saving】the product combines with soldering iron station, soldering iron stand and smd hot air rework station in it. it is provider greater space saving.
- 【a dual system designs】this soldering station combines 60w soldering iron station and 600w hot air rework station for versatile use when it provides dual display system and dual power switch and other advance function including temperature readout, hot air volume adjust, °c/°f conversion, temperature correction and sleep mode, etc.
- 【fast heating & intelligent temp. control】this soldering station heats up fast and has a wider temperature range (356℉~932℉) to choose. with the high-end precision pid program, the soldering iron can stay at the set temperature consistently.the hot air rework station temperature is adjustable between (212℉~932°f), the air volume is also adjustable (max 120l/min); it com...
- 【package content】this soldering iron kit includes the ilibilib hx36 soldering station(contain soldering iron, soldering iron stand and hot air gun), 5 soldering tips, a roll of lead-free solder wire (50g), solder sucker, esd safe tweezers, cleaning sponge.
SHOWview product -
Product Highlights
- Rapid heating with pid----- the hot air gun can heat up to 480℃ in just 5 seconds while the soldering iron warms up to 200℃ in 7 seconds and they are able to hold their temperature steadily thanks to the pid technology, ultimate results guaranteed. this highly efficient heat gun blows at 120l/min while built-in fuse protection guarantees 100% safe operation.
- Auto sleep function ----- heat gun would automatically decrease the temperature when placed on the stand, the temperature would rise once picked up. the ergonomic handle guarantees comfort.
- 2-in-1 design ----- this 700w 2-in-1 smd soldering hot iron station features a soldering iron, a hot air gun, 8 tips, 3 nozzles, 1 iron holder and 1 air gun holder. this machine will save you space and keep your work desk well-organized, separately controlled for efficiency and convenience.
- Enhanced temperature stability ----- a high-performance microcomputer and pid technology provide quick-warming capabilities with improved temperature stability. digital led display to show real-time temperature, easily adjusted temperature with the up and down buttons.
- One year warranty ----- the handle uses high power capacity tips that make it easy to solder large joints, thick terminals, and tough jobs. we are committed to manufacturing products of high quality, offering the best value in the market.
SHOWview product -
Product Highlights
- ★【soldering iron sleep function】the soldering iron enters sleep mode after not using it for 10 minutes; （wakes up from sleep. pick up the handle of the soldering iron, the soldering iron will directly heat to the set temperature)
- ★【scope of application】high-power hot air handle , rapid heating, soft air output, large air volume, suitable for have lead and lead-free operations 【kindly tip】before turning on the power, make sure that the handles of the welding pen and the hot air gun are placed on the tray, and then turn on the two switches on the front of the welding station.
- ★【display and temperature】adopt dazzliang blue 0.7 inch trinity digital tube display, the temperature increases and decreases by ±1℃; the temperature range is 100 to 480℃, and the temperature error becomes linear, all within ±2℃;
- ★【hot air handle sleep function】put the heat handle on the holder, the temperature drops to 100 degrees, enter the sleep mode; （wake up from sleep, pick up the handle and enter the working state)
- ★【material and advantages】it has a temperature memory function.extremely low noise, fast heating ,anti-static design, accurate temperature control.automatic cooling function for effectively prolonging the heater's life and protecting the hot air heater. the product uses the best abs material shell, it will not cause harm to the environment and the human body, it can be ...
SHOWview product -
Product Highlights
- ★★★★【digital led display】 the product adopt microcomputer control,the hot air is lcd dual digital display the temperature.
- ★★★★【widely used】 designed for soldering or de-soldering soic, chip, qfp, plcc, bga and other temperature sensitive components, essential tool for cell phone repair, laptop repair, or circuit boards soldering.
- ★★★★【cautions & warnings】for your own safety, please read the manual carefully before using and strictly comply with the rules of "precautions".
- ★★★★【rework & soldering】 8586 upgrade 2 in 1 smd hot air rework station and soldering iron.
- ★★★★【solder station features】 high power,quick warming-up,temperature stabilization and is impervious to air,,and long life and low noise. it have inductance in the hadle,it will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will automatic stopage
- ★★★★【precautions 】this product is 110v 60hz，before using, please make sure your address is using 110-120v voltage ,please make sure that the power cord is tightly connected to the machine. before turning on the power, make sure that the handles of the welding pen and the hot air gun are placed on the tray, and then turn on the two switches on the front of the welding st...
SHOWview product -
Product Highlights
- 【solder station features】 high power,quick warming-up,temperature stabilization and is impervious to air,,and long life and low noise. it have inductance in the hadle,it will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will automatic stopage.
- 【solder station specifications】 operating volatge:ac110v, output power:700w, noise: less than 45db, temperature range: 100 ℃ to 450 ℃.
- 【digital led display】 the product adopt microcomputer control,the hot air is digital led display the temperature.
- 【product note】 refer to the instructions included with three kinds of nozzles (big,medium and small) replacement part. try to set up the temperature as lower as possible and the airflow as much as possible as to keep heating element working longer and protect ic chips.
- 【7-in-1 full kit】 the packing include: 1 * 858d solder station, 1 * ic puller, 1 * hot air gun heater, 2 * tweezers, 1 * desoldering pump, 1 * 6in1 bga tools.
SHOWview product
Coupon copied
