10 Best
Flashforge 3d Printer Filament Plas
-
-
-
Product Highlights
- Better extruding performance to avoid clogging, wrinkling, blobs, rough and uneven surface. easier stick to hotbed to solve first layer issue. advanced spooling technique to avoid filament tangling.
- Diameter: 1.75mm; length: 325m; net weight: 1kg (2.2lbs); tolerance +- 0.03mm; spool size: diameter 195mm + inner hub 55mm height 60mm. printing temperature: 190-220 deg c (374-428 deg f), depending on printer model. recommended bed temperature: 40-55 deg c (104-131 deg f).
- 100% virgin material without cheap plastic fillers or regrind. specific plasticizer is added to increase the toughness. vacuum sealed with desiccant.
- Glossy type finish. long-term keeping the natural color and luster; excellent toughness, more wearable and weathering proof.
- Mech solutions ltd filament is compatible with creality, makerbot, up, afinia, ultimaker,builder, felix, flashforge, monoprice, xyzprinting, alunar and other desktop and industrial fdm 3d printers.
SHOWview product -
Product Highlights
- [clog-free, bubble-free & easy-to-use]- complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag; recommended pla filament extrusion/nozzle temperature 190-220 degree, no need heating raft, low demand to printers
- [wide compatibility]-works and harmonizes perfectly with all common 1.75mm fdm 3d printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm
- [performance]-flashforge pla 1.75 mm filament is a high-performance pla material with much great strength and toughness, and its environmental friendliness, no smoke and no odor;low material shrinkage, stable printing size
- [less -tangle and easy to use]- full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; larger spool inner diameter design makes feeding smoother
SHOWview product -
-
Product Highlights
- ?less-tangle and easy to use?full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; larger spool inner diameter design makes feeding smoother
- ?cost-effective and wide compatibility?with over 8 years'3d filaments r & d experience, thousands tons of filaments output every month, overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to overture filament cost-effective and reliable for most common 3d printers, such as mk3, ender 3, monoprice flashforge a...
- ?clog-free & bubble-free?-- designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these pla refills. complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag
- ?dimensional accuracy & consistency?advanced ccd diameter measuring and self-adaptive control system in the manufacturing guarantee these pla filaments of 1.75 mm diameter, accuracy +/- 0.05 mm; 1 kg spool (2.2lbs)
- ?life-time guarantee?no matter when or why you need to replace or refund we will help! no risk to give us a chance to prove us, overture, are your reliable 3d filaments /accessories/3d printer/3d pen supplier
SHOWview product -
Product Highlights
- 【upgraded cardboard spool】duramic 3d pinter pla plus (pla+) filament 1.75mm has gradually upgraded to cardboard spool along with dual stickers, which allows convenient sorting and full recycling. the filaments remain the same formula and quality.
- 【wide options for color &color combination】 duramic 3d pla plus filament 1.75mm offers not only more than 20 different colors but also nearly 30 color combinations of 2 pack which are more cost-effective.
- 【accurate &consistent diameter】diameter: 1.75mm, tolerance 100% ±0.05mm, 99.9% ±0.04mm, 99% ±0.03mm and 97% ±0.02mm.
- 【user friendly】the length scale and weight scale make it easy for you to monitor the remaining length and weight roughly. empty spool weight: 140±15g, you can get the exact weight of remaining filament if you need to.
- 【risk-free service】one-month free trial, lifetime quality promise and technical printing support and money-back service if you’re not 100% satisfied.
- 【premium & tough pla plus】 known as the flagship product of duramic 3d, pla plus filaments (pla+) 1.75mm are made of usa high-purity raw material from natureworks. duramic 3d pla pro filaments feature 8 times impact strength, which is perfect for printing functional models with higher toughness need.
SHOWview product -
Product Highlights
- 【dimensional accuracy & consistency】 strict tolerances guarantee these pla filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm; 1 kg spool (2.2lbs).
- 【clog-free & bubble-free】designed and manufactured with clog-free, superb layer bonding and great fluidity for smooth and stable extrusion. complete dried for 24 hours and vacuum sealed before packaging to protect the filament from moisture, no clogging and bubbling problems.
- 【high-quality pla filaments】made of high-quality pla, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish.
- 【less-tangle and easy to use】full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. a larger spool inner diameter design for easy feeding.
- 【wide compatibility】universal compatibility with most of the common 1.75mm fdm 3d printers on the market due to the high-quality standards in terms of manufacturing accuracy and a small dimensional tolerance of +/- 0.02mm.
SHOWview product -
-
Product Highlights
- 2. [wide compatibility] compatible with most fdm 3d printers, such as: ankermake m5, bambu lab p1p, bambu lab x1 series, prusa, creality k2, snapmaker etc.
- 4.vacuumed sealed packaging: sealed vacuum bag to keep it dry and keep out dust;
- 1. [high-speed pla+ 1.75mm] eryone premium high-speed filament pla+ easy to use, which can better meet the high performance requirements of high-speed 3d printers. printing speed 30-401mm/s
- 3.print temperature range: 190¡æ-230¡æ; bed: 60-70¡æ, speed 30-401mm/s.
- 5.weight and spool diameter: net weight 1kg, shipping weight 1.35kg; spool inner diameter 57mm, spool outer diameter 200mm, height 65mm.
SHOWview product
Coupon copied
