10 Best
Display Case For Dolls
-
Product Highlights- Material: made from a flexible, clear plastic that will arrive flattened. assembly will take about 5 minutes. see instruction photo.
- Cap assembly: once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. the cap inserts into the dollsafe sleeve. snap the locking tab into place on each side. turn your sleeve over and insert the other cap the same way.
- Size: 4 x 2.25 x 13 inches (width x depth x height)
- Sleeve assembly: to assemble, lay out the plastic sleeve and identify the 4 corners of the case. two corners are creased, and two corners are flattened. open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. find the flattened corners and gently crease them from the outs...
- Uses: this dollsafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12.5 inches tall and 4 inches wide. does not include pictured doll or action figure.
SHOWview product -
Product Highlights
- Storage container-- suitable for dolls, toys, books, dirty clothes and other household items to keep the house clean and tidy.
- Toys storage box-- perfect and helpful daily life assistant for your housework to organize your babys dolls and toys neatly.
- Plush toy storage box-- made of premium material and good texture, which is, and reliable for use.
- Toys box-- great and multi-functional storage container for you to storage the dolls, toys, clothes and so on.
- Home toy organizer-- with simply but practical design, the storage case is portable and lightweight to carry, also easy to use.
SHOWview product -
Product Highlights
- External size: (lxwxh): 11x11x31cm/4.3x4.3x12.2 inch; internal size(lxwxh): 10x10x30cm/4x4x11.8 inch; board thickness: 2mm/0.08 inch
- Card slot assembly, tear off the protective film of the acrylic board before use. assemble from the white bottom without any tools.
- The transparent acrylic display box with assembled structure can be used to display various collectibles, figures, dolls, building blocks, handicrafts, etc., to give your countertop a new look.
- The display box is made of high transparency acrylic material with a white base. card slot assembly, the bottom plate is stable, 2mm thickness board, strong and durable. clear showcase, the transmittance reaches 98%.
- Simulate assembly before tearing the film, check the wear status of each component and then tear the film for assembly after confirming that there is no problem.
SHOWview product -
Product Highlights
- 💎【easy assemble】:please tear off the protective films with the gloves to avoid finger prints, smudges and stratching. then connecting the acrylic panels at the perforated position, you will get a display box which is dust free and easy to see.
- 💎【widely used】:this memoribilia display case is stackable and can make great use of your countertop space. it's perfect for displaying collectibles, figures, toys, trophy, dolls, model, building set, statues and all kinds keepsakes, football, basketball, helmet, etc.
- 💎【material】:this acrylic display case is made of clear and high quality plexiglass, which is sturdy and durable. it's a crystal and delicate showcase box for dustproof protection in home,room and office.
- 💎【warm led lid light】:the upper board of this delicate case is installed with a lid light, which is warmer-looking and can light up entire display case. it will be great for display and organize collectibles, creating a beautiful stage effect and make a big impression when displayed in any room or office.
- 💎【tips】: 1. we will prepare tools to help you install this display case, please confirm what you have received and let us know if there has any damage or omission. 2. please note the dimensions which is marked at the picture before buying, the dimensional error less than 0.5 inch is normal.
SHOWview product -
Product Highlights
- 【material & size】thickened premium acrylic + wood-plastic composites. the outer dimensions will be 0.8in (2cm) longer than the inner dimensions.
- 【design】keep the collection dust-free, reduce sunlight and ultraviolet radiation, and delay plastic aging.
- 【take attention】⭐⭐⭐tear off the protective film on both sides of each acrylic board by fingernail or key before install.
- 【clear view】the acrylic box is high transparency, we selected 3mm thickness acrylic sheet with 95% transmittance.
- 【versatile】perfect for stores to display art materials, collectibles, figures, dolls, diecast car and so on. it makes your treasured item go from plain on the shelf to being highlighted beautifully.
SHOWview product -
Product Highlights
- Stacking can be placed, can be multi-layer stacking, built-in two partitions, three layers of hand; large size handwork can also be stored, remove the partition can be placed large collection.
- Display case size - the internal size of the product, 11.8x9.2x6.7inch , very suitable for displaying figures, models, toys, mineral, etc.
- Magnetic opening and closing mode; easy to take, easy to open and close, you can put it on your desk, all kinds of your favorite collection.
- The installation process is very simple and can be independently installed quickly.
- About our service:high quality guaranteed.any questions or requirements,feel free to contact us,we are glad to to serve you.
SHOWview product -
Product Highlights
- 【size and material】11.8x11.8x3.1in, made of high-quality abs material, reinforced thick panel, more durable, protect your doll from damage.
- 【tilt is not easy to fall】gift of cellophane paper, stick on the doll's foot, strong adhesion, tilt box is not easy to fall.
- 【wall-hanging】equipped with trackless stickers, no punching, can be directly stuck on the wall, can also be placed on the table, strong bearing capacity, so that your doll in a more conspicuous position.
- 【magnetic suction door design】install rotary hanging, can open the double door, the magnetic suction door to provide suction when the door is closed, protect the doll is not easy to fall.
- 【clear and transparent】made of smooth translucent material, easy to clean, better display your doll.
SHOWview product -
Product Highlights
- 【size and material】11.8x11.8x3.1in, made of high-quality abs material, reinforced thick panel, more durable, protect your doll from damage.
- 【tilt is not easy to fall】gift of cellophane paper, stick on the doll's foot, strong adhesion, tilt box is not easy to fall.
- 【wall-hanging】equipped with trackless stickers, no punching, can be directly stuck on the wall, can also be placed on the table, strong bearing capacity, so that your doll in a more conspicuous position.
- 【magnetic suction door design】install rotary hanging, can open the double door, the magnetic suction door to provide suction when the door is closed, protect the doll is not easy to fall.
- 【clear and transparent】made of smooth translucent material, easy to clean, better display your doll.
SHOWview product -
Product Highlights
- The 6 panels are assembled by you. it is easy to remove and store for display. easy to assemble without glue or screws.
- Acrylic display cabinets not only protect precious or delicate items from dust and fingerprints, but also protect your collections and autographed sports memorabilia from uv rays. our acrylic resin will block most of the uv rays.
- Material: acrylic / crystal clear polystyrene. multiple sizes to choose. bottom and back are mirrors.
- The package is fitted with gloves, a clean cloth and a little circle plate. please wear gloves and use a circle plate to remove the protective coating. each acrylic sheet has a double-sided protective film. please peel off the protective film before use.
- The acrylic display case is fragile. if the product you received is damaged during transportation, please contact us and we will provide you with a satisfactory solution.
SHOWview product -
Product Highlights
- 【internal dimensions】：size ：6×4.7×12.6inch,15×12×32cm ,suitable for 400% bearbrick. if you want to display other figurine, you only need to measure the height/length and depth/width of your figurine , then you can order the suitable display cases for your collectibles.the acrylic display cases has sliding doors, which are easy to open to keep the collection dust-free, r...
- 【easy to assemble】clear display case for figures is easy to assemble, you just connect the sides, top and head. the edges are smooth and the acrylic case fitting perfectly against the base. it can be moved at will, not easily knocked over.
- 【premium material】our display cabinets are made of high-quality acrylic and the top is equipped with a remote control light, which makes your bearbrick collectibles go from plain on the shelf to being highlighted beautifully. it is suitable for desk, office table, dresser, bedside table to display and organize figurines, dolls,collectibles, glassware and and any other k...
- 【remote control light and two kinds of led light strip】the top of the acrylic display case is equiped with a remote control light .you can control the top light to stay on or for 30 minutes, and you can turn it up or down.two kind of light strips for you to better display your collectibles.
- 【note】we provide disposable gloves and clean cloth to prevent fingerprints and dust . you need to tear the layers protective film on the acrylic surface before you start to the assemble.
SHOWview product
Coupon copied
