10 Best
Countersink For Bit And Braces
-
Product Highlights- Versatility – comes in 5 most popular sizes bits 1/4, 3/8, 1/2, 5/8, 3/4 inch counter sink drill bits.
- Efficient- five-flute design reduces vibration and removes chip better, provides smoother drilling experience and extended bit life.
- Precision - 82-degree tip drills countersink holes into most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel, don't work on stainless.
- Compatibility – 1/4” round shank fits all handheld and stationary drills. made from high-speed steel with golden oxide finish for corrosion resistance.
- Reliability - this countersink drill bit set come in a sleek storage case, with dkibbith brand on the case and box. if the product you receive is without dkibbith on the box, please do not hesitate to contact and request for a full refund.
SHOWview product -
Product Highlights
- Meet all your needs–5 packs of countersink drill bits assortment in size #6 (3/32"), #8 (7/64"), #10 (1/8"), #12 (9/64"), and #16 (3/16") for perfect centered screws holes in both soft and hard wood
- Drilling depth adjustable– working length of the pilot drill bit is adjustable for precise depth control; hex wrenches included for changing or tightening the pilot drill bits
- 3in1 countersink drill bit set – enable you to drill, countersink and counterbore in one step, ideal woodworking tools for setting screws flush with or below the surface of a material
- Easy to use–3 sharp edged 82-degree chamfer design counter sink bits built with 1/4" hex shanks with groove for quick size changes without bit slipping, compatible with most electric drills and tools
- Compatible with more materials – pilot bits are made of high quality m2 steel, countersink bits make of high carbon steel, able to drill in hard wood, soft wood, plywood, plastic; please use a drill bit one size smaller in soft wood
SHOWview product -
Product Highlights
- 82 degrees countersink 3/8” countersink drill bits - you can either have the head of the screw fit flush with the surface, or below the surface then conceal it with matching wood plugs; ideal tool for dowel buttons or plugs.
- Multi purposes - the drill bits perform well in softwood or hardwood and serve the needs of most woodworkers; for softwood, we highly recommend to use a drill bit one size smaller than the screw size
- 3 in 1 combination – our units combine drill bit / countersink / counterbore in one tool, with which you can get perfect hole for #4 #6 #8 #10 #12 #14 or #16 screws in one step
- Adjustable cutting depth – the sharp m2 pilot hole drill bit is detachable, so you can adjust the drill depth according to the length of your screw; then tighten it with the hex key (included) to the countersink / counterbore sleeve
- Wide range – built with 1/4" hex shank to fit most quick-change chuck machines or power drills; package includes 7 pieces of m2 screw drill/countersink/counterbore bits in sizes 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32” and 3/16”
SHOWview product -
Product Highlights
- [function]: countersink drills can be used to drill holes in most workable metals, plywood, softwoods, hardwoods, fiberglass plastics and mild steel.
- [advantage]: the five-edged design with 82-degree counter sink removes chips faster and dills hole smoother and the special design can ensure that 82-degree counter sink can extend service life.
- [specifications and packaging]: countersink drill bit set includes 5 pcs countersink bits and 1 pc aluminum carrying case.include size:1/4"", 3/8"", 1/2"", 5/8"", and 3/4"".
- [material]: metal countersink bits are made of industrial grade high speed steel for durability and each countersink is coated with a black oxide coating to prevent corrosion.
- [special 82-degree tip drills]: 82 degree counter sink can drill holes in almost any material because of its unique design and high efficiency.it is very convenient for you to use it.
SHOWview product -
Product Highlights
- 7pcs countersink bit for wood – made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). with 1pc hex l-wrench, you could easily remove and adjust counter sleeve depth and drill depth.
- 3 pcs 1/4" hex shank hss step drill bit set – great heat/ corrosion/ rust resistance with titanium coating. specification: 4-12mm / 4-20mm / 4-32mm. suitable for drilling holes in iron plate, copper plate, aluminum plate, wood, pvc sheet, insulation boards. not recommend for hard and brittle materials such as glass, tile floor, wall etc.
- 32 pack woodworking chamfer drilling tool set – nice set of specialized bits useful in creating a nice finished effect for woodworking. ideal for wood, particle board, fiberboard, logs, plastic boards, pvc pipes used on hand drill, bench drill and electric drill.
- 8pcs 3/8" shank wood plug cutter drill bit set – made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. can cut the plug 22mm/23mm/25mm/26mm in depth as well.
- 6pcs 1/4" hex shank 5 flute countersink drill bit – made of high speed steel, they are pectect for sinking 90° hole in wood and pvc board for ountersunk screw. diameter- 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"). 6pcs cutting twist drill bits - made of hss material with titanium coated, the drill bits edge sharp, faster with less effort. 135° ...
SHOWview product -
Product Highlights
- Different sizes: countersink drill bit set included 5 kinds of sizes:2.8 x 8mm, 3.0 x 8mm, 3.2 x 8mm, 3.5 x 8mm, 4.0 x 8mm, very suitable for using to multi size wood hole drilling. one tool for multi uses, improve your working efficiency.
- Adjustable cutting height: 2.5-10.5mm
- High speed heat treated steel: countersink drill bits are made of high speed steel, quenching treatment, so they are high hardness, wear-resisting and durable.
- Three pointed design: quickly and accurately drill a smooth hole. better in centering and no skid.five-edged chamfer design will fast discharge chips from the hole on both sides automatically.it can effectively prevent the accumulation of debris retention, improve the drilling efficiency.
- Applies: drilling machinery with chuck or joints,the best adjustable wood countersunk bit set ideal for woodworking.
SHOWview product -
Product Highlights
- 【high-quality material】the drill bit is made of high-speed steel and the chamfering device is high-carbon steel. high hardness, offers superior cutting power and is durable.
- 【82°angle】these pilot screw countersinks bits are designed to match the most commonly used woodworking 82°screws. drill bits are precisely fit into the countersink sleeves and the two chamfered flutes enable faster operation and self-clearing drilling on the swarf, making perfectly sized and shaped holes.
- 【different sizes】the countersink drill bit set includes 6 kinds of sizes: 5/64”, 3/32”, 7/64”, 1/8” (x2), 9/64” (x2), 5/32” for #4 #6 #8 #10 #12 #14 screws holes in both soft and hard wood, very suitable for using to multi size wood hole drilling. one tool for multiple uses, improve your working efficiency.
- 【drilling depth adjustable】you may need holes for long or short screws; these counterbore drill bits with adjustable depth stop to fit the length of your screws; just tighten the pilot drill bit with the hex key (included) to the countersink / counterbore sleeve.
- 【easy to use】the countersink drill bit is equipped with a quick-change 1/4” hex shank, compatible with most electric drills and tools with chucks accepting 1/4” hex shank.countersink drill bits are suitable for bench drills, hand drills, and conventional electric drills.
SHOWview product -
Product Highlights
- 3/8" shank 8pcs wood plug cutter drill bit set made of reliable carbon steel material,used for tapered 1/4", 3/8", 1/2" ,5/8" wood plugs to cover recessed screw holes or hide blemishes,able to cut plugs to 22mm/23mm/25mm/26mm in length.
- 7pcs three pointed countersink drill bits made of high speed steel with good abrasion resistance and reliable, includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm for drilling pilot holes,the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.
- Package included 23pcs woodworking chamfer drilling tool, 6pcs 1/4" hex shank hss 5 flute 90 degree countersink drill bits, 7pcs three pointed high speed steel countersink drill bit with one l-wrench for wood drilling or woodworking chamfer, 8pcs wood plug cutters drill bit set and 1pcs automatic center punch for marks workpiece with a dimple, creating a starting point ...
- 1/4" hex shank 5 flute countersink drill bit made of high speed steels and with 6 different diameter sizes 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"),used for sinking 90 degree 6 different sizes holes into wood and pvc boards countersunk screws and fixings.
SHOWview product -
Product Highlights
- 7pcs three pointed countersink drill bit with l-wrench are made of high speed steel with good abrasion resistance and durable,includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm for drilling pilot holes,the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.
- 1/4" hex shank 3pcs hss step drill bit set, perfect step drill bits suitable for drill holes in various material： within 3mm/0.12 inch (iron plate, copper plate, aluminum plate); within 5mm/0.2 inch (wood, pvc sheet, insulation boards). not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.
- 6pcs 1/4" hex 5 flute 90 degree countersink drill bits: all have a 90° angle on the point for sharp and precise countersinking. the cutting edge is hardened and honed for sharpness. a chatter-free,five-flute designed with staggered cutting teeth aranged to insure free chip flow and rapid chatter free cutting.
- 3/8" shank 8pcs wood plug cutter drill bit set made of durable carbon steel material,used for tapered 1/4", 3/8", 1/2" ,5/8" wood plugs to cover recessed screw holes or hide blemishes,able to cut plugs to 22mm/23mm/25mm/26mm in length.
- Refund or resend guarantee--no questions asked! if you are not 100% satisfied with your wood working chamfer drilling tool, a refund or a new package will be issued. click “buy it now” and enjoy quality of our tools.
SHOWview product -
Product Highlights
- 【longer life】the countersink drill bit for wood is made of industrial grade high-speed steel with nitrided surface, which has better toughness and wear resistance. our cr-v alloy steel chamfering edge has 2x longer life than carbon steel chamfering edges on the market.
- 【adjustable countersink】woodworking countersink bits set feature stop collars for adjusting depth. quality built depth adjustable counter bore attaches to flats on shank with 2 hex screws for a secure fit and can be adjusted for controlled pilot hole depth.
- 【ideal combo set】the countersink drill bit set includes widely used sizes in woodworking projects: #4 (7/64"), #6 (9/64")，#8 (11/64"), #10 (3/16"), #12 (7/32"). 2 wood plugs cutter size 3/8" and 1/2", a 1/8" free hex key wrench, 2 stop collars size 3/8" and 1/2".
- 【multiple appliaction】ezarc hex shank countersink bits are perfect for most woodworking like soft wood, hard wood, fiberboard, plywood, plastic and pvc. not recommended for metals or steel board. this counter sinker drill bit set is suitable for hand drill, bench drill and electric drill. universal 1/4 inch hex shank prevents slipping in standard chucks and is compatibl...
- 【superior speed & ideal finish】four ultra-sharp cutter countersink and counter bore chamfer angle 82 degree provide smooth and fast drilling in hard and soft wood. tapered pilot drill bits for drilling fast, clean pilot hole, ensure tight fit for screws. counter sink bit can drill, countersink, and counterbore in one step to maximize work efficiency. note: using the woo...
SHOWview product
Coupon copied
