10 Best
Cnc Controller Boards
-
Product Highlights- ♞【applications】 the control board can be used with the 1310,1610-pro, 3018,3018-pro and 3018-pro max etc engraving machines.
- ♞【support motor】support xyz three-axis control, spindle.support stepper motor: 12v, maximum current of 2a or less is recommended within 1.5a and additional heat. (any stepper motor nema17,nema23);support spindle: support 24vdc spindle pwm speed (0%-100%),also support 3-pin pwm/ttl signal control module
- ♞【model】upgraded 3 axis grbl 1.1f usb port grbl control board; input voltage: 24vdc
- ♞【new functions】add 2-pin emergency stop button port,probe port,xyz limit port and add the power button switch.maximum support for 2000rpm spindle;support 0.5w-20w pwm module;support grbl offline controller. equipped with silent fan, good cooling effect.
- ♞【support software】grbl contol/candle(3 axis)/universal gcode sender; support system:windows xp / win 7 / win 8 / win 10 (32/64 )/ linux
SHOWview product -
Product Highlights
- Compatibility: support 12v/24v laser, ttl/pwm modulation signal, 3p interface and 2p+2p interface; support 775 motor, 200w/300w/500w spindle; support dual y-axis use, three-axis and two-axis switching use; support x/y/z limit switch, z-axis probe, emergency stop switch
- Support software：lasergrbl/lightburn/candle(3 axis)/universal gcode sender;support system: windows xp/7/8/10.
- Model:3 axis grbl 1.1f usb port grbl control board;32-bit arm architecture;input voltage: 12-24vdc .cnc router machine controller board
- Support stepper motor: 12v, within 2a maximum current, within 1.5a recommended. (stepper motor 42, 57).⚠️please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard.
- Tip: before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. customer service 24h online, to provide you with help.
SHOWview product -
Product Highlights
- Dual y-axis drive board: the included dual y-axis usb drive board allows for independent control of two y-axis stepper motors. this feature enables synchronized and coordinated movements, reducing the chances of misalignment and ensuring precise and symmetrical engraving or cutting.
- Offline support: the stepper motor drive control-board supports offline operation, eliminating the need for a constant connection to a computer. this feature allows for standalone operation, making it easier to use the machine in different locations or without the need for a dedicated computer setup.
- Advanced 32-bit controller: the 3 axis grbl v1.1f 32-bit controller features a powerful 32-bit controller, providing enhanced processing capabilities for precise and efficient stepper motor control. this advanced controller ensures smooth and accurate movements, resulting in high-quality woodworking, cnc routing, and laser engraving.
- Versatile compatibility: the controller is compatible with various software applications that support grbl firmware, such as grblcontrol (candle) and la-ser grbl. this compatibility allows users to choose their preferred software for controlling the machine, providing flexibility and convenience.
- Wide range of applications: this controller is suitable for woodworking engraving machines, cnc routers, and laser engraving machines. its versatility makes it a valuable tool for hobbyists, diy enthusiasts, and professionals alike, enabling them to create intricate designs, precise cuts, and detailed engravings on various materials.
SHOWview product -
Product Highlights
- Compatibility: support 12v/24v laser, ttl/pwm modulation signal, 3p interface and 2p+2p interface; support 775 motor, 200w/300w/500w spindle; supportx/y/z/a four-axis drive, y-axis dual drive. support for rotary axis limit switch, z-axis probe, emergency stop switch;5v/12v/24v constant voltage pin.
- Support software：lasergrbl/lightburn/candle(3 axis)/universal gcode sender;support external driver, external driver reserved interface with the market high-power driver consistent, convenient wiring.
- ⚠️ if you're using a computer with versions higher than win8, you not need to install the driver files from the usb drive when connecting your control board. simply ensure that your computer is connected to the internet when you connect the board, and the driver should automatically load. note: this only applies to versions higher than win8. if you're using an earlier v...
- Model:4 axis grbl 1.1f usb port grbl control board;arm 32-bit;input voltage: 12-24v dc 5a.equipped with 5 a4988 drive independent driver module, support upgrade to drv8825.cnc router engraver milling machine controller board.
- Support stepper motor: within 2a maximum current, within 1.5a recommended[nema17、nema23（max. 57 stepper motors)].⚠️please check phase sequence when connecting the stepper motor, the phase sequence may be different for different motors, wrong connection may burn the motor a/nd the motherboard.
- ⚠️tip: before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. customer service 24h online, to provide you with help.
SHOWview product -
Product Highlights
- Compatibility: support 12v/24v laser, ttl/pwm modulation signal, 3p interface and 2p+2p interface; support 775 motor, 200w/300w/500w spindle; support dual y-axis use, three-axis and two-axis switching use; support x/y/z limit switch, z-axis probe, emergency stop switch
- Support stepper motor: 12v, within 2a maximum current, within 1.5a recommended. (stepper motor 42, 57).⚠️please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard.
- Model:3 axis grbl 1.1f usb port grbl control board;arm 32-bit;input voltage: 12-24vdc .cnc router engraver milling machine controller board
- Support software：lasergrbl/lightburn/candle(3 axis)/universal gcode sender; support system: windows xp/7/8/10.
- Tip: before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. customer service 24h online, to provide you with help.
SHOWview product -
-
-
Product Highlights
- Software: grbl controller, universalgcodesender
- Support xyz three-axis control, spindle, laser module. support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")
- This controller board is designed for genmitsu cnc router 1810-pro, 3018, and 3018-pro. it can perfectly compatible with sainsmart blue laser module
- Stepper motor drive: drv8825; spindle power: 150w; input voltage: 24v (12-24v)
- Support stepper motor: 12v, the maximum current within 2a, recommended within 1.5a and additional heat. (any stepper motor 42, 57)
SHOWview product -
-
Product Highlights
- With step motor: the motherboard adopts a dedicated power chip that supports 12v‑24v and multiple stepper drives of 4988, 8825, tmc2208, tmc2100, suitable for lcd2004, lcd12864, for mks tft24, 28, 32, 35, 70.
- Easy control: the for makerbase laser cnc engraving machine motherboard also has a mobile app function, which can connect to for mks dlc32, control motion, edit images, upload files, and more.
- Excellent design: adopting premium 4 layer pcb, integrating 2560 and the control board onto one pcb, making wiring simpler and more stable.
- Ultra high speed computing capability: due to the high speed io flipping speed and powerful timer of the main control module, the for mks dlc32 is suitable for beginners to upgrade the main board of the for makerbase wood laser cnc carving machine. the laser speed of the tool accessories can get to 8000 millimeters per minute, which can achieve a very high carving speed.
- Wide compatibility: the dlc32 offline controller supports for grbllaser and for lightburn software, which is very easy to use for all laser engraving machine users.
SHOWview product
Coupon copied
