8 Best
Ceiling Fan Mounting Kits
-
-
Product Highlights
- Attic access ideal - mounting bracket for use in new constructions or remodels. fits all ceiling fans. fan support of up to 70 lb.
- Fixture support for 16" centers is 150 lbs. fixture support for 24" centers is 90 lbs.
- The electrical box can be positioned anywhere desired along the brace.
- Each end of the brace screws into the joists securely and includes two teeth for added stability. application is intended for 1/2" sheetrock.
- The sealproof bar hanger mount box provides simple and safe installation of a ceiling fan or light fixture with secure attachment to a ceiling joist. can be used with engineered truss.
- Fits 16" to 24" ceiling joists. the mounting bracket can be installed in finished ceilings through a hole large enough to fit the box.
SHOWview product -
-
-
Product Highlights
- 【compact size & maximum loads 】the product size detail of this fan/fixture mounting box is 6.364 inch x 8.000 inch x 8 inch, 14.5 cubic-inch. perfect for installing a fan in a vaulted ceiling. this ceiling fan mounting box can support mounting ceiling fans up to 70 lbs and fixtures up to 200 lbs.
- 【premium quality】this fan mounting box is made of solid and sturdy plastic material with textured and paintable white surface. you may also paint the fixture to finish with your desired colors to match the color with your fan and light fixture or just fine left with its natural color.
- 【fb900 fan/light mounting box】this fb900 fan and light fixture mounting box fits for mounting fans and light fixtures on a cathedral ceiling angles to 80° & up. perfect and secure centered installation to your home.
- 【easy to install】perfect way to mount a fan or light fixture on an open cathedral ceiling. it's easy to install in an unfinished ceiling, and a simple 2x4 frame is needed to work with an open ceiling. (a 2x4 frame not included) attach the box to the ceiling angled rafters, keeping the short sides of the box touching the angled rafters. push the cable through the cable c...
- 【package included】the package of the fb900 fan or light fixture mounting box includes two short center screws, a installed nm cable connector and two 3.5inch long screws for bracket installation. note:two long screws help to hold in place your fixture until removed by installer.
SHOWview product -
-
Product Highlights
- Advantages: carbon steel material with zinc plating on the surface, the zinc coating provides good rust resistance, durable to use. there are screws and nuts included in the package, which can save you time and effort.
- Application: this ceiling light plate usually mounting on the ceiling floor and it is used for hanging a chandelier or pendant light. extremely suitable to use at places like home, office, bookstore, or other places.
- Color: silver; material: galvanized carbon steel; inner dia.: 47mm / 1.85 inch; overall size: 115x15.5mm / 4.53x0.61 inch (d*h); package content: 2 x ceiling light plate (screws, wiring nuts, ground screws included)
- Instruction: convenient to install, screw this plate into your round ceiling light base.
- Note: you might need to check the length of this plate if it can be installed in your round ceiling light base.
SHOWview product -
Product Highlights
- For all ceiling fans that utilize a 1/2-inch or 3/4-inch diameter extension down rod
- Features 1/2-inch i.d. canopy ball to help stabilize ceiling fan
- Unique patent-pending design allows you to install your ceiling fan on ceilings angled up to 45 degrees and is remote control adaptable
- Brushed nickel finish
- Includes mounting hardware
SHOWview product
Coupon copied
