10 Best
Car Radio Antenna For 2013 Sienna Vans
-
Product Highlights- Direct replacement for old parts. keep in mind that this is not an antenna, but the rubber piece tightens up your antenna to prevent wobbling around.
- Installation tip use some soapy water or lubricant to place the new rubber on the side.
- High-quality materialradio antenna base bezel is made of flexible rubber, renewing the antenna adapter without melting or hardening in extreme climates.
- Fits 2007-2013 toyota tundra replacement abty-tndr-0713 86392-0c040 manual radio base inlay strips
- Included in the package: 1 piece x antenna trim piece.if you have any question,please feel free to contact us.
SHOWview product -
-
Product Highlights
- Easy to install: the installation is simple,no tools or adhesives required, just remove the old one, push the decoration on the antenna into the antenna,and tighten it to complete the installation.
- Note:perfect replacement for the original,this is not the antenna, but the rubber sheet around the area where it connects to the antenna is attached to the vehicle, please confirm before buying.
- High quality: radio antenna base bezel make of flexible rubber, perfect fit, low cost, and can be used for a long time,update antenna adapter will not melt or harden in extreme climate.
- Oem part number:86392-ae010, compatible with 2004 2005 2006 2007 2008 2009 2010 toyota sienna. (please confirm before purchasing).
- Service --- if you have any questions about the product, you can contact us by email, we will solve you as soon as possible.
SHOWview product -
Product Highlights
- 📼 waterproof and dustproof: the material of the car antenna booster casing is abs resin, which has various advantages such as dust prevention, waterproof, and durability. on the fuse base, it is also equipped with premium waterproof inserts and waterproof covers. strictly eliminate the problem of fm radio antenna amplifier caused by poor contact for a long time. i belie...
- 📼 concealed installation: the installation of the car amplifier does not require too much effort from you. you only need to: 1.install the antenna amplifier behind the car audio system. 2.connect the female socket of the amplifier to the male socket of the original car radio antenna; connect the male connector of the amplifier to the radio hole of the car cd or dvd. 3.f...
- 📼 amplify signal & reduce noise: our car antenna amplifier is made of premium copper wire, which can enhance signal sensitivity and increase reception distance. at the same time, it has a built-in shielding metal cover, which effectively blocks the interference of the outside world to the signal intensifier and reduces the noise. make the sound quality of the car radio ...
- 📼 common to all car models: this car radio antenna booster has a voltage of 12v and a copper wire length of approximately 13 inches. compatible with 99% of vehicle models on the market, such as cars, vans, trucks, rvs, suvs, boats, etc. if you are unsure whether your car model is compatible with this product, you can also consult us at any time.
- 📼 you will receive: car signal booster*1+strong adhesive*1+quick connector*1+cable clamp*2. after receiving the product, you can first verify whether the quantity of components in the packaging is correct. if you have any questions about the use and installation of the product, you can refer to the instructions provided with the product. i hope this car amplifier can br...
SHOWview product -
Product Highlights
- Oe number: 86392-ae010
- Quick installation - easy to install and replace the broken radio antenna base, no special tools needed.
- Fit for toyota sienna 2004-2010
- Function - size: 11x4cm / 4.33"x1.57"(l*w); hole diameter: 7mm / 0.28".
- Package includes: 1 pc radio antenna base
SHOWview product -
Product Highlights
- Perfet fit: perfect replacement for oem accessories, original oem part number: 86392-08020;
- Durable: utilizing high quality material and a superb design, this ornament is incredibly resistant to breaks, cracks, and fading.
- Packing list: 1 x car antenna base (note: do not include antenna)
- Easy to install: just push the antenna base into the installation position.
- Function: waterproof rubber sleeve is used for the protection of fender antenna base
- Advantage: you’ll get a longer life out of the replacement, then you did from the original piece.
SHOWview product -
Product Highlights
- 😶【sturdy and durable】 this car antenna adopts aluminum alloy and rubber, which means it has excellent impact resistance and flexibility to resist sunlight and aging, one-piece design is not afraid of high-pressure water gun rinsing, no longer worry about the antenna will be damaged when washing the car, sturdy and durable, longer service life.
- 😶【easy to install】 it only takes 1 minute to install the antenna, and kids can do it too. first remove the old antenna from your car, then choose the right screws for your car antenna base from our car antenna parts kit, and finally install the antenna, no other extra tools are needed.
- 😶【perfect design】 this truck antenna spiral has a unique minimalist styles that complements the bodywork of off-road vehicles and trucks to show off your personality. ditch the old-fashioned and long traditional car antenna, the simple stubby antenna will get you thousands of compliments on your car!
- 😶【stable signal】 our products use copper wire and have new wiring technology, can perfectly receive am/fm radio signal and does not affect the use of gps and other devices. even in rainy days, the signal will not be affected by bad weather in order to give you a quiet and clear driving environment, not disturbed by noisy noise, focus on driving and safe travel.
- 😶【what you will receive】 in addition to a premium rubber spiral radio antenna, our package contains the needed car antenna screw adapter set, which includes 9 different antenna screws, m6 m6 adapter, m6 m7 adapter (h=25mm, od=12mm) and 2 rubber washers.
SHOWview product -
Product Highlights
- Premium build & all-weather durability - crafted from high-quality, rust-free aluminum, our antenna is built to withstand harsh weather conditions. the threaded section is constructed from highly conductive copper, providing the best connection.
- Unmatched quality & standards - we are dedicated to delivering top-notch automotive accessories that serve our customers' diverse needs. our commitment to quality includes using only non-toxic materials and adhering to the highest gmp manufacturing standards.
- Exclusive for toyota sienna - our antenna mast is meticulously designed for toyota sienna 2004-2015, ensuring a precise fit. our bullet antenna is thoughtfully designed to avoid interference with tree branches or garage roofs.
- Quick and tool-free installation - upgrading your antenna is a breeze! you can easily replace your old antenna with the bullet-style version in under a minute, no tools required.
- Am station considerations - it's essential to note that am radio reception in rural areas may be affected. if you frequently listen to am stations, we recommend keeping your factory 9 -inch antenna.
SHOWview product -
Product Highlights
- Easy to install: unscrew the old antenna, pick correct size adapter, screw the new antenna right into the existing roof mount or antenna base with the adapter
- Flexible mast: the external part is made of flexible rubber for preventing the antenna from being broken off easily
- Note: the antenna is compatible with most cars, but does not fit jeep grand cherokee / renegade / wrangler jl, mazda mx-5 and ford fusion
- Car antenna replacement: come with 3 different size adapters, it fits most vehicles and is a good choice to replace old or broken roof mounted antennas on cars, trucks, hatchbacks, suv, camper,motorcycle
- Improve radio reception: by utilizing high quality internal stainless steel, the antenna will enhance am fm signal reception, which enables you get more clear stations with no static
- Package includes: 1pc car antenna 17.5cm + 3pcs mounting screw adapters (m4, m5, m6)
SHOWview product -
Product Highlights
- 【easy to install】: 1. remove the antenna of the original car and wipe clean the side position; 2. take out the antenna and sticker, and stick the tape on the bottom of the antenna; 3. tighten the screw of the antenna with a tool; 4. align the position directly and press firmly. note: before pasting, please keep the installation location clean and dry!
- 【stylish decorations】: the streamlined shark fin shape design can replace the original long antenna, more beautiful and fashionable, immediately enhance the class of your car. it is a great decoration. cooler and sportier than the original car!
- 【widely applicable】: this universal shark fin antenna measures 6.7x2.4x2.8inch and is suitable for most cars on the market. it is only suitable for flat roofs and not for curved roofs. (to ensure proper installation and use after purchase, please check the size of your car's antenna base before placing your order).
- 【durable material & stable signal】: we use sturdy abs material, professional grade baking paint treatment, shark fin antenna is strong and durable, built-in pure copper antenna and chip, which can better accept am/fm signal and make the signal stable and powerful.
- 【purchase hassle free】: 100% satisfaction guarantee! we ensure that every product you receive from us is made with high quality raw materials and is free from defects. if you have any questions, please feel free to contact us, we will reply as soon as possible.
SHOWview product
Coupon copied
