10 Best
Car Multichannel Amplifiers
-
Product Highlights- The ts 400x4 is 400 watts rms rated at 2 ohms, with 4 channels of 100 watts rms each and is a full range amplifier.
- Crossover: hpf 90hz (-12db/8ª) fixed / lpf 90hz (-12db/8ª) fixed and level control.
- The ts line is full range amplifiers so it can be wired with subwoofers, woofers, drivers and tweeters, in addition to being 4-channel amplifiers with rca input and high level input.
- The positive/negative power supply cable is 11 awg. the output cables wire gauge is 15 awg and the remote cable is 18 awg. 20a circuit breaker or a fuse is recommended
- Dimensions (w x h x l): 5.43" x 1.93" x 4.76" / weigth: 1.32lb
SHOWview product -
Product Highlights
- Level: it sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of head units found in the market.
- Power (power supply connector):the connector terminal (+) must be connected to the battery's positive pole with a 10mm² (minimum) wire gauge. the connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge. the remote terminal must be connected to the head unit remote output with a 0.75mm² wire.
- Input: inputs of signals to be amplified. connect these signals to rca outputs of head unit, using good quality shielded cables to avoid noise interference
- Wire high level input: input for high level / low impedance signals (from the speaker output of the players or multimedia center).
- Short-circuit protection: shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output.
SHOWview product -
-
-
Product Highlights
- Universal compatibility: tailored for extensive use within car audio systems, this car audio amplifier is compatible with a wide range of car speakers, offering superior sound quality that brings convenience and an enhanced listening experience wherever you go.
- Easy installation: designed with user-friendliness in mind, the car radio amplifier is easy to install without requiring complicated setup procedures. it saves both time and effort, allowing for a hassle-free integration into your car's existing audio system.
- High power and efficiency: the car dsp amplifier delivers an impressive maximum output power of 60w rms (4ω) and 80w rms (2ω) per channel, with a powerful bridged mode of 160w rms (4ω). this high-performance amplifier utilizes advanced dsp technology to minimize power loss, ensuring high efficiency and stable operation, all while providing multiple layers of protection ...
- Robust metal construction: crafted from high-quality metal material, the car stereo amplifier is built to be sturdy and durable, resisting damage and ensuring a long service life. its rugged design is not only aesthetically pleasing but also functional, providing reliable performance even under harsh conditions.
- Advanced audio performance: with a total harmonic distortion of <0.15%, a frequency response of (±2db) 10hz-30khz, and a signal-to-noise ratio of >90db, the amplifier ensures crystal clear sound output. additionally, its sensitivity range of 200mv-8v and recommended fuse type of 25a x 2 cater to a universal application for car audio systems, making it a perfect fit for ...
SHOWview product -
Product Highlights
- The positive/negative power supply cable is 7 awg. the output cables wire gauge is 15 awg and the remote cable is 18 awg. for protection fuse or circuit breaker please use 60a.
- The connector terminal (+) must be connected to the battery's positive pole with a 7 awg wire gauge. the connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge
- The ds 800x2 is a multi-channel amplifier and has 2 channels of 400 watts rms each, or 1 channel connected in bridge with 800 watts at 4 ohms
- Short-circuit protection: shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output
- The frequency response (full range) is 10hz ~ 22khz (-3db). the crossover 80hz ~ 2.2khz (-6db/8ª) variable; low pass 80hz (-12db/8ª) fixed.
SHOWview product -
Product Highlights
- Class a/b topology - class ‘a’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. class ‘b’ amplifiers have no current flowing through its outputs with no audio signal. efficiency!
- Variable gain control - the gain control is not for adjusting volume. it simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Bridgeable - dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Warranty - planet audio provides a powerful 6 year platinum online dealer warranty so long as the purchase is made through amazon.com. we strongly encourage professional installation of this product to ensure proper and safe functionality
- Power - 200 max x 4 @2-ohms, 100 max x 4 @4-ohms, 400 max x 2 bridged @4 ohms
- Full range - with a full range amplifier you not only have the option to run your speakers, but also your subwoofers
SHOWview product -
Product Highlights
- Class a/b – this orion cobalt multichannel subwoofer amplifier exhibits a class a/b topology. in the presence of no audio signal, class a amplifier has a high amount of current flowing in its output while class b amplifier has no current flowing.
- Power – this class a/b 1500 watt amplifier has a power rating distribution as followed 750 x 2 max @ 2 ohms, 375 x 2 max @ 4 ohms. the multichannel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
- Features – the 2 channel bass boost amplifier has features like - frequency response: 10hz-30khz, bass boost, remote bass knob, gain control, 2-way protection, hi/low level inputs, thermal protection, mosfet power supply, led power and protection indicator and 2 ohm stable
- Quality - this class a/b 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others
- Low/high level inputs – the multichannel subwoofer amplifier for car stereo speakers come with low/high level inputs. a low level (rca) input is measured in voltages. a high level (+/- wire) input is measured in wattages. both essentially carry signal from your receiver to your amplifier to your speakers
SHOWview product
Coupon copied
