7 Best
Camera Stabilizer For Sony A7s
-
Product Highlights- [mount accessories] via nato rail, arri compatible rosette, cold shoe receivers, 3/8"-16 and 1/4"-20 threads with locating pins
- [slotted screwdriver] secures under the cage for convenient assembly
- [protective armor] for sony a7 iv, a1, s3, r4, 73, r3, a9 minimizes wear over time
- [compatible] with type iv/vi side handles & type iv baseplates
- [lightweight & durable] aluminum & stainless steel construction
SHOWview product -
Product Highlights
- For sony a7r v/a7 iv/a7s iii/a1/a7r iv: smallrig cage 3667 is designed for sony a7r v, a7 iv, a7s iii, a1, a7r iv to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. note: the hdmi cable clamp 3000 is not compatible with alpha 1 and alpha 7r iv because it will block the synchro terminal interface when used on the alpha 7...
- Three-point locking: a positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left m2.5 screw form a three-point locking to make the camera stable. adjust the direction of the left locking slider to adapt to different models, [a7 iv] side is suitable for alpha 7 iv and alpha 7r v, [a7s iii/a1] side is suitable for alpha 7s iii / alpha 1 / alph...
- Built-in quick release plate: the bottom quick release plate for arca has added 1/4"-20 holes with a spacing of 18mm, which is compatible for dji rs 2 / rsc 2 / rs 3 / rs 3 pro, and can also be adapted to dji rs 2 / rsc 2 stabilizer mounting board (riser plate) and smallrig quick release plate for arca 3154.
- Improved design: 1. a cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as microphone 3468 and led video light 3286; 2. two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with smallrig quick release plate for arca 3154. a qd hole is added at the bottom, which is compati...
- Multiple mounting points: the cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for arri, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903b. there are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the qd hole at the bottom is compatible with qd shou...
- All-round protection: built-in all-round rubber gasket to prevent scratches. with the cage installed, the camera interface, dials, buttons and changing batteries are not affected. the opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhan...
SHOWview product -
Product Highlights
- Wireless remote commander - aodelan shooting grip with wireless remote commander can remote controls for still and movie shooting without having to touch the camera. any function assigned to the camera's c1 button can also be recalled via the remote grip c1 button.
- Flexible tilt function - a flexible angle tilt function makes it easy to set the ideal camera angle (whether shooting selfies or a subject). 90° lock positions also make it possible to shoot in vertical orientation with optimum stability and the three hundred and sixty degree turning capabilities make for very quick resets.
- Aodelan shooting grip is just compatible with sony zv-1, a9, a7c, a7riv, a7r iii, a7r iv, a9 ii, a6600, a6400, a6100, a7 iii, rx0 ii, rx100 vii cameras. pls notices that maximum load is 1kg / 35.3 oz, don't up to overweight.
- As a tripod - spread the grip's cleverly integrated legs it can become a stable tripod for the camera leaving both hands free for vlogging and other applications.
- No cable required - eliminates the wires and makes turning the camera that’s mounted on the shooting grip easier.simply aim and shoot to get in the way.
SHOWview product -
Product Highlights
- Developed camera cage kit: cámera vídeo jaula película making kit, the kit contains a camera cage, a top handle and a wooden side grinder that is well suited for the camera and replaces the sony a7r iii / a7 ii / a7iii.
- 【no blocking of the original parts of the camera】form-fitting cage, the cage has been specially adapted for the camera body and does not block the battery compartment and the original functional parts. this is extremely practical.
- 【universal mounting】the camera can be attached via a 1/4 inch screw on the bottom of the cage with 1/4 inch and 3/8 inch threads for quick charging of the tripod.
- Many accessory holders: estabilizador de movil with plenty of 1/4 inch threaded holes, two cold shoe holders for microphone, fill light, monitor and articulated arm attachment.
- Solid aluminium alloy structure: cage made of aluminium alloy, which is robust enough for long-term use and is perfect for protecting the camera and mounting on extensions.
SHOWview product -
Product Highlights
- Plenty accessories mounts: with abundant 1/4-inch threaded holes, dual cold shoe mounts for microphone, fill light, monitor, articulating arm mounting.
- Universal mounting: the camera can be fixed via 1/4-inch screw at the bottom of cage, with 1/4-inch and 3/8-inch threads for quick tripod loading.
- Designed camera cage kit: the kit includes camera cage, top handle and wooden side girp, well designed to fit the camera, replacement for sony a7r iii/ a7 ii/ a7iii.
- No blocking on camera original parts: customized to camera body, the cage does not block the battery compartment and original functional parts, extremely convenient.
- Solid aluminum alloy structure: the cage is made of aluminum alloy, tough enough for ultra-long term use, perfect for camera protection and extension mounting.
SHOWview product -
Product Highlights
- Add 1/4”-20 mounting points as well as two cold shoe mounting points for expansion
- Aluminum alloy, stainless steel construction. available in tilta gray and black
- Protective armor compatible with the sony a7, a7 ii, a7 iii, a7s, a7s ii, a7r, a7r ii, a7r iii, and a9 cameras, suitable for use by video professionals
- Made to work with other accessories in the "tiltaing" series of products
- A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations
SHOWview product -
Product Highlights
- 【multiple mounting points】the kit has several built-in cold shoes can attach microphone 3468, led video light 3286b, and monitor mount 2905b; multiple built-in 1/4"-20 threaded holes support the remote control side handle 3323; built-in 3/8"-16 locating holes for arri fits monitor mount 2903b. it also comes with a nato rail on the left for side handle 3260. in addition,...
- 【clamp for hdmi cable】the cable clamp for hdmi mounted onto the left side of the cage via two 1/4"-20 screws, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stable signal transmission.
- 【for sony alpha 7 iii / alpha 7r iii】smallrig cage kit for sony a7 iii / a7r iii 4198 is designed for handheld shooting and attaching other accessories. the cage locks the camera via one bottom 1/4"-20 screw and two side lock adapters, and the built-in rubber pads could protect your camera. built-in quick-release plate for arca at the bottom is convenient to switch betw...
- 【top handle for arri】the top handle with 3/8"-16 locating holes for arri connects to the cage. the ergonomic design enhances the experience of grip for the fuselage. the top handle makes the cage kit easier to carry and facilitates low-angle shooting.
- 【safe installation】the cage adopts three-point locking, which is stable and does not deflect. it comes with a built-in magnetic flat-head screwdriver & hex spanner for easy disassembly and assembly. note: please remove the side lock adapters before installing this cage.
SHOWview product
Coupon copied
