10 Best
Boost Converters
-
Product Highlights- Input: dc 3 v to 30 v, optimum operating voltage range: 5v to 30v; output: dc 5 v to 35 v voltage is continuously adjustable, maximum output current is 4 a
- Dsn6009 is a good-performance 400khz 4a switch currency step-up boost module; this module xl6009e1 is coming with the 3rd generation high-frequency switch technology as the core chip, the performance is much higher than lm2577
- Xl6009 dc-dc adjustable step-up power converter module, the step-up circuit board is a good efficiency non-isolated boost module
- Step-up boost converter module: they can fix on the emergency lamp or other electronic devices between the corresponding voltage range, diy an output adjustable mobile power, boost charger, etc.
- Warning: this is only for the increasing output voltage; the input voltage should not be over 30 v to avoid any possible damage
SHOWview product -
Product Highlights
- High power and stable output, it converts 10-32vdc to 12-60vdc. operating temperature: -40 to 85(if temperature is too high, please enhance heat dissipation) frequency: 150khz conversion efficiency: 95% (efficiency is related to input/output voltage, current and voltage difference) short circuit protection: yes (input 15a fuse) reverse input protection: no, usually can ...
- Designed with large heat sinks for better heat dissipation. output current: 8a (related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be. please enhance heat dissipation when current is over 4a) constant current output range: 0.3~8a turn lights adjusting range: 0.3~8a output power: cooling 90wmax; enhanced...
- Output indicator light: with charging indication; it shows red when charging, green when fully charged output flow back protection: yes installation method: four 3mm screws (not included) wiring method: terminal blocks
- This is a non-isolated dc power converter module with long service life. type: non-isolated step up module (boost) input voltage: 10~32vdc input current: 16a (max.); if more than 8a, please enhance heat dissipation quiescent current: 15ma(tested when converting 12v to 20v; it will increase when output voltage is higher) output voltage: 10~60vdc continuously adjustable (...
- Widely use for solar power voltage stabilization charging, battery pack charging, large power led driving, etc.high quality components ensures high conversion efficiency, up to 95%.
SHOWview product -
Product Highlights
- 【precision components】the module has components such as inductor coil, copper heat sink, high-precision potentiometer (boost clockwise, counterclockwise), digital tube voltage display (display voltage is more intuitive), input indicator and output indicator.
- 【practical tool】the power supply of electronic equipment can be set according to the system voltage.large capacity 12v battery high power notebook mobile power can be used at will. the single battery high current notebook mobile power supply with usb interface and identification resistance, and with 2.5a high current output.
- 【boost module】this is a powerful dc-dc boost power supply module, suitable for electronic equipment, digital products, etc. it can diy regulated power supply, input voltage 3v-35v, output voltage 5v-45v adjustable for monolithic integration circuit, digital programming, precise control, reliable and durable.
- 【good performance】 0.9wh power sensor adopts new original ic input and output switch display. input and output terminals are designed with screw terminals for easy connection and disconnection.usb and 2.5a high current output design can identify resistance and the phone at the same time.
- 【note】after inputting the power (3-35v), the input indicator lights up and the module works normally, adjust the blue potentiometer knob (usually rotate clockwise to increase counterclockwise rotation and fall), and use a multimeter to detect the output voltage until needed. if the module output voltage cannot be adjusted, it is always equal to the input voltage.
SHOWview product -
-
Product Highlights
- Smart fan: this boost converter is designed with smart temperature control fan, which will automatically work when temperature reaches about 60℃, and stop when temperature drops below 60℃
- Under voltage adjustable range: dc10v‑50v. firstly adjust under‑voltage to the minimum, then adjust input voltage to required under‑voltage protection value, slowly adjust under‑voltage value clockwise to increase; when the under‑voltage light is on, adjust counterclockwise of one circle, then power on again
- High performance: this is a non‑isolated dc power converter module that converts 10‑60vdc to 12‑97vdc, high power and stable output. high quality components ensures high conversion efficiency, up to 97%
- Wide appplication: the step up module is widely used for high power solar street lamp driving, various led lighting cv driving, vehicle‑mounted and mobile device power supply, diy adjustable cv cc power supply, solar power charging, and various batteries charging
- Notice: module output should not short circuit or measure current directly with multimeter short circuit, short circuit will burn out module
SHOWview product -
Product Highlights
- Adjustable voltage -- this is a non-isolated dc power converter module with long service life. high power and stable output, it converts 10-60vdc to 12-97vdc.
- Widely application -- this boost power module is widely used for high power solar street lamp driving, various led lighting cv driving, vehicle-mounted and mobile device power, diy adjustable cv cc power, solar power charging, and various batteries charging.
- 97% high conversion efficiency -- high quality components ensures high conversion efficiency, up to 97%.
- Designed with smart temperature control fan -- which will automatically work when temperature reaches about 60, and stop when temperature drops below 60.
- Intelligent design for optimal performance: this non-isolated step-up module features advanced technology that ensures stable output voltage and current. the input low voltage protection and reverse input protection will safeguard your device against potential damage, while the short circuit protection guarantees safe operation.
SHOWview product -
-
Product Highlights
- 【dc to dc boost converter】specifications: radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly.
- 【dc to dc boost converter】please power on the module first, then connect the load, which is especially important in high-power loads; the input voltage should be stable, especially when some low-voltage (12v) input power supply is connected to the load voltage, it will fall below 10v, and it is easy to break down the power tube at this time.
- 【dc to dc boost converter】600w high power booster module, wide voltage input: 10v ~ 60v, 12v ~ 80v adjustable wide voltage output; output current can be adjusted; ultra-low input and output pressure difference.
- 【dc to dc boost converter】the module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load.
- 【dc to dc boost converter】two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
SHOWview product -
Product Highlights
- 【science experiment equippment】dc 3v-6v high voltage transformer can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science.
- 【high efficiency】according to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency. input current: 2a- 5a; input voltage: dc 3v to 6v;
- 【3-6v high voltage generator】high temperature arc igniter, with 3-6v high power, instant ignite cigarette & paper, can work for 20 seconds continuously, and high frequency, good quality, easy to use.
- 【stable performance】it can generate high temperature and high frequency arc, can easily ignite combustible. the peripheral circuit is simple (simply connect the switch, install the battery), the discharge intensity is violent.
- 【100% promision】we promise to take the repsonsibility for our dear consumer, if you have any question about the product, welcome to contact with us at any time.
SHOWview product -
Product Highlights
- 【high power current】1500w 30a dc-dc boost converter step-up power supply module, 100v/210a low resistance mos with big power and current input, suitable for big power led, motors.
- 【multi-layer protection】the power supply module uses double sendust magnets winded with 1.2mm copper wires.low voltage protection will protect module and battery against damage from over-discharge.
- 【diy step-up module】the diy replacement module is suitable for storage battery, thickened heatsink and intelligent temperature control cooling fan dissipate heat better.
- 【reverse protection】support reverse input protection with 150a mos so there is no worry about wrong input wire and burn out power supply.
- 【conversion efficiency】92% to 97% (efficiency is related to input/output voltage, current and voltage difference. the smaller difference is, the higher efficiency will be).
SHOWview product
Coupon copied
