10
Best
Bilge Pumps
of
January 2021
-
Product Highlights- Flow: 1100 gallons per hour or 5000 l / hour, head: 13 ft (4mts), outlet dia. 1-1/8" (29mm)
- Ideal for fishing boats, cruisers, runabouts, yachts, etc
- Flow rate: 1100 gph; voltage: 12 vdc
- Typical uses: suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
- Built for the harsh marine environment, are suitable to withstand the most adverse condition. the water-cooled engine ensures a long service life
SHOWview product -
-
-
-
Product Highlights
- Typical uses: suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure typically used in boat hulls / bilges
- Electrical characteristics : runs continuously submarine pond with cabling 6" (1.8m) standard body pumps high strength nylon snap-mounting of the pump on the swivel base protected against overheating and comply with the requirements flameproof.
- Gph500 technical date : volt : 12v , flow: 32 l/m, amp max: 1.8a , outlet orifice: ⌀ 19 mm -3/4" , dimension : 114x95 (4.5x3.75)
- Pumps reliable high quality. built for the harsh marine environment, are suitable to withstand the most adverse condition. the water-cooled engine ensures a long service life.
- Attention : can not be used to pump oil - otherwise the pump will not work. removal and transfer of water: ---feel it ---pumps ---dishes showers ---spare time ---industries ---all the little use and decanting
SHOWview product -
Product Highlights
- Heavy duty motors, offer high capacity output.
- Water/moisture tight seals; stainless steel shafts; rustproof and corrosion resistant.
- This product is 100% brand new and comes in original packing box.
- Water cooled long-life motors ; ignition protection.
- Snap lock strainer base for easy installation and removal; silent and vibrationless operation.
SHOWview product -
Product Highlights
- High flow: for use from 22-234l / min (1.32-14.04 cubic meters / hour)
- Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition impact resistant abs housing.
- The amarine-made submersible bilge pumps are tough enough for any bilge.
- Small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow
- Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies
SHOWview product
