10 Best
Bike Suspension Products
-
Product Highlights- 【suspension absorbs the impact from the ground firmly and reduces the shock to the body】 recommended for people who have had a direct impact on their body, such as rough roads and uneven ground, and have difficulty.
- 【the rail uses spring steel】 you can rest assured in terms of strength. it's made of imported special alloy spring steel material with fine toughness and wearable. highly tough and not easily deformed
- 【4,000 units sold globally!! it was published in the magazine ”bicycle club jan 2020 in japan”!!】
- 【just install in between them without changing the seat post or saddle】 you don't have to replace the saddle you're used to. since the front and rear adjustment can be done by sliding, you can easily adjust the position.
- 【for various bicycles, specially road and mountain bikes】 【5 variety of colors】 black, red, orange,celeste,silver 【size】 w:6.3"×h:3.3"×l:2.0" (16×8.5×5cm) 【weight】 0.77lb(350g) 【material】 special spring steel clamp, 6061aviation aluminum(stiff material) 【accessories】body.clamp,rubber cover,hex wrench,instructions(japanese) ＊make sure it fits your bike size ＊ tighten as ...
SHOWview product -
Product Highlights
- Universal compatibility: compatible with mountain bikes, road bikes, touring bikes, and more, thanks to its 28.6mm front fork diameter and 31.8mm handlebar diameter.
- Sturdy, waterproof build: crafted from rustproof aluminum alloy via cnc forging, this stem is built to last under various conditions, with a height of 45mm and a length of 110mm.
- Vibration reduction: designed for effective vibration reduction, this handlebar stem features a 30mm suspension travel and a 20-degree angle to alleviate arm discomfort and fatigue, especially on rigid forks.
- Matte texture, enhanced hardness: its matte texture and enhanced hardness, achieved through an anodized sandblasting process, add style and durability.
- Upgrade your ride: weighing approximately 440g, this suspension handlebar stem combines comfort, durability, and style, promising a more enjoyable biking experience.
SHOWview product -
Product Highlights
- ★pay attention to choose correct diameter size★ . wrong size will not work and will cause return. take out your current seatpost, the diameter marked on it’s lower area. then buy same size from the option.
- Excellent quality: produced by world largest bike components supplier hl corp and comply to international bicycle safety standard iso 4210. full aluminum 6061 body ensure the lightweight, 27.2mm weight 498g/ 1.1lbs, 31.6mm weight 508g/ 1.2lbs. surface anodized.
- Spring coil suspension: build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks. rebound force adjustable by tighten or loose the bottom screw. suspension travel 42mm/ 1.65inch.
- Clamp angle adjustable: saddle clamp angle can adjust in -5 degree to +18 degree. clamp offset 14mm.
- 2 years warranty: we are confident to the product quality and offer 2 years warranty. it fit for riders weight 50kg/ 110lbs to 100kg/ 220lbs(clockwise the bottom screw if you are heavy, anticlockwise it if you are lightweight).
SHOWview product -
-
Product Highlights
- ✅ adjustable spring hardness - the preload of the seat post can be easily adjusted on the lower side with an m6 allen screw. the preload of the spring can be increased by screwing in the screw. this means that the suspension seat post is also suitable for heavier weights.
- ✅ clean environment - the products from are characterized by a long service life. the high-quality spring seat post becomes a loyal, long-term companion. in addition, the seat post is even delivered plastic-free in a cardboard box to protect the environment.
- ✅ comfortable riding without back pain - this seat post made of high-quality aluminum is fitted with a spiral spring with a total of 50 mm travel. with a body weight of 65 - 120 kg, this provides adjustable and comfortable suspension and thus considerably relieves the spine.
- ✅ easy assembly - to assemble your seat post correctly without spending a lot of time in order to guarantee you optimal comfort while driving.
- ✅wide use: the bicycle seat tube shock absorber is suitable for most mountain bikes, road bikes, mountain bikes and city bikes.
SHOWview product -
Product Highlights
- Ride further, faster, and more comfortably – the bike handlebar suspension stem is the perfect upgrade to your e-bike, gravel bike, hybrid, or road bike. float over
- Reduce the damage to the body caused by bumpy roads, buffer 80% of the impact of handlebars on the wrists, and ride more easily.
- Compatibility: easy install and maintenance free – this sping stem fits standard 1-1/8in (28.6mm) steerer tubes; . the stem fits 31.8mm handlebars
- Say goodbye to sore hands, wrists, back, and neck and say hello to increased control, more confidence, and a super smooth ride. the shock absorber bike stem reduces the effects of impacts and vibrations by up to 70%
- Springs with four hardness can be replaced at any time, and the installation is simple, which is suitable for people with 99% weight.
SHOWview product -
Product Highlights
- ★how to adjust and install suspension★ : rebound force adjustable by tighten or loose the bottom screw wiht m6 allen wrench. suspension travel 42mm/ 1.65inch.build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks. saddle clamp angle can adjust in -5 degree to +18 degree. 2 bolts hold the...
- ★compatibility★ : most fixed gear bike ,road bike ,mountain bike , universal bikes,etc. support weight 50kg/ 110lbs to 100kg/ 220lbs(clockwise the bottom screw if you are heavy, anticlockwise it if you are lightweight)
- ★how to choose correct diameter size★ : (1) check the original seatpost size marked on the body ,choose the same size as the original one.(2) measure the inside diameter of the frame tube(normally it is not accurate, considering operator,measuring tool , temperature,etc.,).(3) inquire the bike frame seller to get the further information
- ★seat tube parameters★ :material: 6061-t6 alloy aluminum , diameter : 27.2mm length: 350mm travel: 40mm adjustable preload suspension travel. offset :14mm .weight: approx 490g(1.08 lbs) damping:coil spring , you can add seatpost thim(27.2~28.6/30.0/30.4/30.8/30.9/31.6/33.9) to fit different size
- ★warranty:★ :we are confident to the product quality and offer 2 years warranty.and if there are any questions, you can contact us firstly on amazon, we will serve you and satisfy you
SHOWview product -
Product Highlights
- Ride further, faster, and more comfortably – elevate your e-bike, gravel bike, hybrid, or road bike experience with the shockstop bike handlebar suspension stem. glide over obstacles and absorb vibrations, allowing for extended rides, increased speed, and enhanced control, even on challenging terrain.
- Reduce fatigue and boost efficiency – say goodbye to expending energy on absorbing impacts and vibrations with your body. the bicycle suspension stem effectively diminishes bumps and vibrations, minimizing fatigue and enabling longer, swifter rides on your existing bike.
- Compatibility: simple installation and maintenance-free – the shockstop stem is compatible with oversized 1-1/4in (31.8mm) steerer tubes, commonly used by brands like canyon and giant. it also offers compatibility with standard 1-1/8in (28.6mm) steerer tubes, the standard size for most modern bikes. this stem fits 31.8mm handlebars (with shims available for 25.4mm and 2...
- Up to 70% bump and vibration absorption – bid farewell to sore hands, wrists, back, and neck, and welcome improved control, heightened confidence, and a supremely smooth ride. experience a reduction of up to 70% in the impact and vibration effects, courtesy of the shockstop shock-absorbing bike stem.
- 20° of damped suspension travel – strike the perfect balance between vertical compliance and stability without compromising steering. in lateral movements, this stem remains as rigid as a standard stem, ensuring you can sprint or climb out of the saddle with confidence.
SHOWview product -
-
Product Highlights
- Specifications: eye to eye:125mm /150mm/165mm/190xmm/； load: 750lbs, 1000lbs ； bushing size: 8mm x 24mm.
- Material: hydraulic rear shock absorber high quality aluminum alloy, anodized surface, wear resistant and corrosion resistant.
- Application: bicycle rear shock absorber, suitable for mountain bikes, bikes, scooters and other bikes modification.
- Performance: bike rear shock absorber, the shock absorption is controlled by the oil pressure spring system, the shock absorption is soft, stable, and the service life is long; it has the same shock absorption effect as air pressure shock absorption, and is economical.
- Note: bikes with a large rear shock weight (in pounds) require a lot of pressure, and a shock with a small weight requires a small amount of pressure. please measure the size of the shock absorber or your own riding comfort weight to match before purchasing, and please see the product introduction page for specific specifications and how to choose a shock absorber.
SHOWview product
Coupon copied
