10 Best
Bench Buffers
-
Product Highlights- No wooble, no vibration -- comes with accurate 8mm/0.3'' spindle, no wobble or run-out. the base of the bench buffer has four rubber taps which work to keep it from walking around on your workbench, or it can also be nailed into your workbench.
- Setup easy -- setup only take a few minutes as you only need to put the buffing/polishing wheels on. the bench buffer can also be put a grinding wheel (φ≤3'') on and other 8mm/0.3'' drill arbor adapter.
- Take up little bench space -- the small size that can be lifted by one hand, makes it very portable, great for when you have very limited workspace and have to move tools on/off the bench a lot. small and compact, convenient for your quick jobs, also at the same time, won't make your workbench messy.
- Do a good job at polishing -- this buffer is good at polishing the copper, silver, knife blades, knife handles and so on. two fiber wheels is helpful for knocking off rust and larger defects. remember: use correct buffing wheel and polishing compound.
- Warranty & attention -- please distinguish the left and right spindles to ensure the wheels can work. flyrivergo provide one year warranty and anytime online technical guidance. if you have any questions, we are always be there for you.
SHOWview product -
Product Highlights
- Function: an easy-to-use buffing station designed for a variety of buffing and polishing projects
- Heavy duty build: this benchtop buffer polisher was made with a cast iron base providing a weighted and stabilized platform for reduced vibration, while also eliminating potential damage often caused by vibrational buffering
- Includes: (1) 6" bench buffer machine, (1) soft buffing wheel, (1) hard buffing wheel, (2) extra thick spiral sewn buffing wheels
- Features: dual end wheels for simultaneous polishing, a convenient off/on switch and extra long ball bearing supported machine shafts
- Power buffer specs: 6" buffing wheel diameter, ½ horsepower induction motor, 120v, 60 hz 3450 rpm
SHOWview product -
Product Highlights
- Take up little bench space -- the small size that can be lifted by one hand, makes it very portable, great for when you have very limited workspace and have to move tools on/off the bench a lot. small and compact, convenient for your quick jobs, also at the same time, won't make your workbench messy.
- 800-10000rpm adjustable -- the powerful 320w motor allows the polishing machine to freely adjust the speed between 800-10000rpm, don't get hot or shake. the adjustable bench buffer is enough for you to polish anything.
- Ideal for beginners! -- comes with cotton wheels*2, fiber wheels*2, drill chuck*1, protection glasses*1, polishing compound*2 and 1 set of polishing buffing wheel. cotton wheel and fiber wheel for the metal surface, drill chuck and buffing wheel shank for the deep clean the inside. for beginners, with just this one bench buffer set, you could basically polish everything...
- Do a good job at polishing -- this buffer is good at polishing the copper, silver, knife blades, knife handles and so on. two fiber wheels is helpful for knocking off rust and larger defects. remember: use correct buffing wheel and polishing compound
- Warranty & attention -- please distinguish the left and right spindles to ensure the wheels can work. we provide one year warranty and anytime online technical guidance. if you have any questions, we are always be there for you.
SHOWview product -
Product Highlights
- 3 polishing wheels: this bench buffer comes bundled with a soft wool wheel, a moderate fiber wheel, and a hard grinding wheel. these three hardness polishing wheels help you polish a wide range of gemstones and metals. all can be done, whether rough buffing surfaces, fine polishing, or removing rust.
- Minus the hazard: transparent flush deflector can keep away all kinds of debris splash while buffer running, better guarding your use security. adjustable tool rests for angled grinding applications. non-slip feet help keep the bench buffers easily fit on any workbench.
- Durable brushless motor: upgraded to a brand-new brushless motor with longer life! you can focus more on your work with our jewelry buffer's good durability and low noise. moreover, there is no need to replace the carbon brush. virtually maintenance-free.
- Lightweight table grinder: with a weight of only 1.8kg and a compact design, this polishing buffer is easy to move and can be used anywhere without taking up too much space, whether you're a professional in a workshop or a hobbyist making diy projects.
- 100+ accessories: 100pcs of sculpting accessories can meet your various rough and fine engraving needs. our benchtop buffer polisher is applied to burnish and polish diversified gemstones, metals, rusts, and wood drilling. one device meets many needs.
SHOWview product -
Product Highlights
- ✅more than a jewelry polishing machine - by adjusting the speeds, you can polish anything from chains and jewelry to gems and machine components. this buffer polisher can even be a dental lathe!
- ✅with buffing wheel polisher & more - this bench buffer comes bundled with six 4" cotton wheels for post-polishing jewelry, two fiber wheels for rust removal, and one polishing compound.
- ✅lightweight table grinder polisher - whether you're a professional in a busy workshop or a hobbyist making diy projects, this polisher buffer can be used anywhere without taking up too much space.
- ✅compact, portable, powerful - don't be fooled by the size of this bench polisher grinder machine. despite its size, it boasts a low-noise 320w motor that churns out speeds of 1750rpm up to 8500rpm.
- ✅adjustable speed: the grinder wheel polisher features different speeds, making it ideal for any type or level jewelry worker looking at buffing their pieces! the variable speed bench buffer and polishing machine for jewelry can perform different degrees of polishing by adjusting the speed. variable speed bench buffer speeds ranging from 1750 to 8500 rpm, you can go fro...
SHOWview product -
Product Highlights
- ✅more than a jewelry polishing machine - by adjusting the speeds, you can polish anything from chains and jewelry to gems and machine components. this buffer polisher can even be a dental lathe!
- ✅lightweight table grinder polisher - whether you're a professional in a busy workshop or a hobbyist making diy projects, this polisher buffer can be used anywhere without taking up too much space.
- ✅ compact, portable, powerful - don't be fooled by the size of this bench polisher grinder machine. despite its size, it boasts a low-noise motor with a power range of 200-320 watts that churns out speeds of 1750rpm up to 8500rpm.
- ✅minus the hazard - intuitive controls are safe for hands. the speed dial is separate from the bench grinder switch. mounting holes and corner brackets to stabilize the jewelry buffing motor's base.
- ✅with buffing wheel polisher & more - this bench buffer comes bundled with two 4" cotton buffs for post-polishing jewelry, two fiber wheels for rust removal, and one polishing compound.
SHOWview product -
Product Highlights
- 4.0a motor: powered by a 4.0a brushless induction motor, the bench buffer will provide you with continuous and quiet performance with a 3450 rpm speed.
- 2 buffing wheel: a hard buffing wheel and a flannelette buffing wheel are provided for your various buffing needs.
- 6" bench buffer: the buffer polisher machine with a 6-inch buffing wheel is compact in size but also powerful for various buffing and polishing jobs.
- Stable operation: the iron base and 2 predrilled mounting hole keeps the buffing machine stable all the time.
- 2 year warranty: woodskil provides a 2-year warranty and lifetime customer service, if you have any questions or feedback, please contact us through amazon, thanks.
SHOWview product -
Product Highlights
- 【premium and efficient】 the extended shaft length around the motor housing offers unobstructed working space, ensuring long-term durability with high quality. the dual-end wheels allow simultaneous polishing.
- 【versatile tool】 the toolspace benchtop polishing machine is an ideal choice for polishing gemstones, wood surfaces, metals, gemstones, plastic parts, and more. it is not just a jewelry polishing machine!
- 【powerful benchtop polishing machine】 the toolspace benchtop polishing machine is equipped with a powerful and high-quality motor, providing fast start-up speed and a maximum speed of 3450rpm. the enhanced motor improves your work efficiency.
- 【dual polishing wheels】 this benchtop polishing machine comes with two 8-inch wheels, a fiber wheel for rust removal and a cotton wheel for polishing.
- 【wide applications】 our benchtop grinding and polishing machine is designed for professionals and hobbyists alike. if you have any questions, please feel free to contact us. thank you.
SHOWview product -
Product Highlights
- Must need for handicraft lover - this jewelry polishing machine does a good job at polishing the jewelry, acrylic dental materials, metal or plastic parts. you will watch an old item come back to life as long as you use the correct polishing compound. the detachable shaft is for you to replace other accessories, can be modified and upgraded by diy.
- Stable without vibration - jewelry buffer is made with a cast iron base which has very little vibration to it. buffing machine has 4 rubber feet help keep them in place on a table for light use, easily fit on any workbench. if on a smooth desktop, there are two mounting holes in the base for you to bolt or screw down the bench buffer.
- Powerful but low noise - 320w is different from 200w, almost 1/2hp, more powerful motor and less chance of stalling. don't worry, our bench polisher grinder machine won't get hot and noise during operation, just a simple hum. it's powerful and perfect for small to medium pieces!
- Adjustable speed - buffer polisher has a powerful motor that starts up in 0.1 seconds. the variable speed dial lets you adjust the buffing wheel speed to any rpm between 1750 and 10000(without any accessories). different speeds to deal with different materials.
- Attention & warranty - if your cotton polishing wheel can't keep on the spindles, the reason is that you installed the left and right spindles reversely. we provide 1-year after-sales and online technical guidance at any time. if you have any questions, please contact us.
SHOWview product -
Product Highlights
- 【speed adjustable】- this jewelry buffer polisher has a powerful motor that starts up quickly and can adjust speed up to 10,000 rpm, this jewelry buffer polisher can meet your different speed needs.
- 【safe to operate】- the heavy and stable duty base to reduce vibration and the adjustable rotation speed, quiet and less noise, more safety and comfortable.
- 【equipped with two wheel】- the package is included in grit wheel and fiber wheel. the two tapered spindles attach to the 1/4" motor shafts and suitable for muslin or buffing / polishing / grinding. cutting wheels up to 4" in diameter.
- 【multi-function flexshaft 】- it's got a nice flexshaft with 4mm stainless steel handle which can be used with a variety of grinding discs, cutting wheel , brush head. 【please note: 】the flexshaft is recommended to install on the right side of the machine.the flexshaft should not be severely bent or twisted, otherwise the flexshaft core is easily damaged.
- 【wide application】- this bench polisher is suitable for jade, agate, metal, wood, amber, beeswax engraving, polishing and drilling, also can be used for beads, bodhi, various types of diy handicraft polishing, grinding, family small workshops, cutting, polishing, etc.
SHOWview product
Coupon copied
