10 Best
Automotive Brake Light Bulbs
-
Product Highlights- * 1034 automotive bulbs | areas of application: 1034 signal light bulb, 1034 tail light bulb, 1034 side marker bulb, 1034 brake light bulb, 12v automotive system
- Street legal
- Part no.: 1034; volts: 12.8/14v; watts: 32/3cp; base: bay15d
- * oem equivalent easy to install
- 1 year warranty & ce compliant: 1 year warranty against manufacturer's defects.
SHOWview product -
-
Product Highlights
- Best value
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. bulbs dim over time.
- Fit type: vehicle specific fit
- Twice the life of standard incandescent bulbs
- Original equipment quality seal for the most reliable performance
- Miniature bulbs by philips, for over 100 years we have been continuously innovating automotive lighting
SHOWview product -
Product Highlights
- 【stay with you longer】: ac12v-24v non-polarity wide voltage constant current source design, aluminum parts active heat dissipation so the heat dissipation effect is very fast. the perfect product quality makes it can accompany you for a long time.
- 【easy to install】: this bulb is very easy to install, plug and play, and will not cost you any time or effort at all. please check your user manual or the original bulbs size to verify the compatible before purchasing.
- 【high brightness chipset】: our lights use 3014-144smd induction decoding high brightness chip. it effectively increases illumination and visibility and does not glare other drivers.
- 【widely application】: led replacement light bulbs, fits all bay15d 1157 sockets, used for backup reverse lights, turn signals, brake lights, taillights, side marker lights, corner lights, blinker lights, etc.
- 【purchase hassle free】: 100% satisfaction guarantee! please contact us if there is anything about which you are unsure or dissatisfied. our belief is to provide the best products to all users.
SHOWview product -
Product Highlights
- Bulb brightness: with a brightness of 440lm and a color temperature of 3800k. t20 reverse light provides 360° light efficiency, full bright yellow, and is more conspicuous when braking. the rear brake light provides enough brightness, even in foggy weather or other bad weather, it can clearly indicate the driving status of the vehicle and protect your driving safety.
- Nice design: the filament and gas mixture of the long time bulb have been engineered for withstanding road vibration and provide longer life than traditional bulbs. the mini light bulbs are designed for durability, requires low maintenance, so you needn't to spend much time and effort on repairing these light bulbs.
- Durable material: the brake light bulb for car is made of abs, which has high temperature resistance and insulation. do not worry about the heat from the bulb melting the plastic parts in your car. the strobe brake light bulbs are also engineered to withstand considerable road shock and vibration.
- Wide usage: the bulb can be applied as reflector and reverse lights, turn signal lights, side signal lights, corner lights, trailer lights, parking lights, tail lights, rear brake lights, flashing brake light, etc. easy to install, just plug in the lamp holder and the effect will be shown immediately.
- Package includes: you will get 10 pieces bulbs, enough quantity for your daily use and replacement. please ensure the size before purchasing in case of unfit situation.
SHOWview product -
Product Highlights
- Performs twice as long compared to standard bulbs
- Direct replacement to old bulbs with no modification required
- Produced by a trusted oem (original equipment manufacturer) light source supplier
- Lights dim over time, replace bulbs in pairs for optimal performance
- Made from high quality materials for long-lasting durability
SHOWview product -
Product Highlights
- √ high quality: built-in intelligent constant current ic driver. plug and play, 360 degree beam angle,longer life span, lower power consumption, 15% of halogen bulbs consumption
- √ also call 7528 light bulb, common use for vehicle interior and exterior as turn signal light,brake light, reverse light,turn tail light,rear light,stop light,indicator light,backup light, corner light, parking bulb, side marker light,width lamp,exterior light.
- √ standard 1157 bay15d (s25) base, popularly known as 1157 or 1034 base(two pins 180 degrees opposite, not at the same level, at the top on the base have two contact point)
- √ longer working hours- autoone 7528 led bulb is aircraft grade aluminum body built and unique bump appearance design increase the heat dissipation area. wide voltage & constant current provide up to 45, 000 hours lifespan and low power consumption. no more frequent changes improved driving experience
- √ ultra bright- autoone 1157 led bulb is 360 degrees illumination increase the brightness and visibility, 300% brighter output than halogen, without dark spots, no glare to other drivers. instant start, no delay, safe and reliable enough. 【dual brightness】- there are dual brightness in the same bulb. the dim mode is tail light, the bright mode is brake light
SHOWview product -
Product Highlights
- 💛 waterproof and dustproof - this tail light socket comes with an o-ring rubber ring on the outer ring, which can be tightly connected with the device, with waterproof and dustproof function, avoiding problems such as burnt out connectors and flickering bulbs.
- 💛 safe and reliable - our brake light socket is made of superior abs plastic, which is more superior to similar pigtail light socket in terms of high temperature resistance and impact resistance. the built-in high purity copper core provides intense illumination, making your vehicle safer and brighter to drive at night, making sure the socket is stable and has a long se...
- 💛 model specification - our tail light bulb holder is a standard 1157 bulb socket, perfectly compatible with bulb models 1016, 1034, 1076, 1130, 1152, 1154, 1157, 1158, 1493, 2057, 2357, 2397, 3496 and 7528. most cars/trucks/suvs/motorcycles on the market can be applied, which is your best choice for car accessories.
- 💛 product dimension - the tail light bulb holder package contains 2 pcs, size is 1.38x1.38x0.96 inch, wire length is 3.95 inch, suitable for automotive brake light bulb socket, tail light bulb sokcet, turn signal bulb socket for replacement, modification and repair use. before purchasing, please confirm the applicable size, so as not to be unable to use after purchase!
- 💛 easy to install - this tail light wiring harness is quick and easy to install, the product comes with three black/red/yellow cable harnesses. to install, simply remove the old or damaged connector and properly connect the new bulb socket to the bulb cable. when you hear the "click" sound, the bulb and socket have been successfully matched.
SHOWview product -
Product Highlights
- Wide application: 7440 7443 7441 t20 w21w for brake light,back up light, tail light etc.a 50w load resistor must be needed to avoid error code or hyper flash when using as turn signal light.
- High quality: built-in intelligent constant current ic driver. plug and play, 360 degree beam angle,longer life span, lower power consumption, 15% of halogen bulbs consumption
- Specification: 2pcs 7443 54smd 3014 chips, length:1.4” 35.8mm, diameter: 0.71” 18.2mm , 6000k white light, 300lm per bulb, voltage: 12v-24v, wattage: 3w.
- Upgrade chipset: 54pcs upgrade 3014 chipset, copper bracket, gold wire solder.fast heat dissipation, durable long life time,high brightness. 300% brighter than original halogen bulb.
- Warmly service: buy with confidence, one year no hassle for refund. any questions, just feel free to contact us via your order or click the blue font "melphan-auto" for help.our customer service team will reply within 24 hours. and make satisfactory solution with no hassle for you.
SHOWview product -
Coupon copied
