10 Best
Automotive Battery Ratings
-
Product Highlights- Includes 10-gauge ul certified jumper cables and a carrying case
- Red/black insulated exterior ensures quick visual identification for easy set-up
- Jumper cables for jump starting a dead or weak battery; ideal for small/compact cars
- Heavy-duty, tight-grip alligator clamps with a 110 amp rating; strong spring and comfortable handle for easy positioning
- Flexible cables; 12 feet length (ideal when 2 vehicles are nose to nose or side by side)
SHOWview product -
Product Highlights
- Fast accurate detection: thanks to the premium integrated chip, the test result of the battery health tester accuracy rate reaches 99.5%. at the same time, it adopts advanced conductivity test technology, which can be displayed on the lcd screen in just 3 seconds to see accurate battery health data
- Over-voltage/reverse protection: by the low-frequency signal injection test, the vehicle battery tester protects the battery during the test. the premium-quality copper clamp features reverse polarity protection and spark resistance for a stable and secure connection during testing
- Upgrade clear display screen: please remove the screen protector before use. this upgrade version battery tester screen has a great visiable white background and black data display, it will very clear though under the strong sunlight. no worry for the dim display when you test the battery outside.
- Battery health test: the battery tester gives advice on where to replace the battery by intelligent analysis of the health status of the battery. it's tailored for 12v/24v batteries. compatible with the regular flooded, agm, efb, and gel battery for optimum performance
- Easy to operate: just connect the smart clip of the automotive digital battery tester to the car battery correctly, you can see the soh, soc, power, internal resistance, and discharge capacity of the battery at the same time. say goodbye to the expensive fee of checking batteries in the auto repair shop after now
- Essential battery assistant: as a car battery analyzer equipped with a dot matrix lcd display for us to diagnose battery health issues anywhere. not only do we offer a quality battery tester but also 2 years warranty and 24 hours online service, please feel free to contact sinotrack team
SHOWview product -
-
Product Highlights
- ★ 250a rating ★ - the battery distribution block rated 250a when work in 12v circuit, and the battery terminal block can handle max 48v.
- ★ protect cover & nuts ★ - each power busbar will come with a protect cover and two nuts, which helps to shelter as much exposed area as possible to reduce the risks of accidental contact and prevent short circuit, makes the circuit safer.
- ★ product ★ - a pair of 12v power distribution block, includes a red positive power distribution block and a black negative power distribution block.
- ★ 5/16" stud terminal ★ - the battery bus bar terminal block includes 4 x 5/16" studs terminal and 3 x #8 screw terminals, which makes the 12v junction block able to accept large size terminal connectors and wires.
- ★wide application ★ - the 12 volt bus bar with cover aims to make the wiring of circuit become neat and tidy, preventing mess harness from causing electric short circuit, suitable for automotive, car, truck, marine, boat, solar wiring.
SHOWview product -
Product Highlights
- Scope of application: can be used in power systems such as automobiles, rvs, ships, yachts, racing cars, agricultural vehicles, etc.
- Corrosion resistance material: adopt pc and brass material, possess high strength, impact resistance, corrosion resistance
- Product function: install the charging column through the body panel for easy access to battery terminals and fast charging
- Guarantee safety: the battery charger posts are supplied in pairs and consist of 3/4in studs, a black and a red for safety and to prevent cables from crossing. simply mount the post through the 1‑1/4in hole
- Excellent performance: rated current for 250a, fire rating is ul94 v‑0, possess stable structure and long service life
SHOWview product -
Product Highlights
- Made from quality plastic material and gray in color
- Cable terminals are included
- Battery cable quick disconnects fits 6 gauge size wire and have a 50-amp rating
- This battery disconnect provides a connection for battery charging or for quick battery changes during a race
- Sold as one pair
SHOWview product -
Product Highlights
- This cut-off selector switch can be easily installed on petrol-powered boats or vehicles, such as small yacht, rv, camper, truck, or atv etc.
- It has four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.
- The on-off disconnect switch is designed for use on a single 12-60 volt battery. it can prevent unknown devices from draining the battery and save you from having to recharge it on a regular basis.
- This car battery disconnect switch has a continuous rating of 275 amps, an intermittent rating of 455 amps and a crank rating of 1250 amps.
- It is durable and solid contraction. package comes with screws, bolts, copper terminals and shrink tubes and you are ready to go.
SHOWview product -
Product Highlights
- 🚘【premium material】our kill switch for car is made of silver contact and pure copper wires. durable and reliable. rated current 250a dc12v, this battery disconnect isolator is upgraded from the old model as the improved fittings make mounting contacts stronger. all required wiring harnesses included.
- 🚘【kind notice】on some models of vehicles, after the remote control of this product is used to disconnect the vehicle battery and turn it on again, you need to wait about 6s before pressing the vehicle start switch to start the vehicle. our product is according to the color of the wire to distinguish the positive and negative, black for the negative wire, red for the pos...
- 🔋【prvent battery drain & anti-theft】this remote battery disconnect switch can kill your car battery power with remote control，prevent battery drain and your car from being stolen. if your car had a parasitic battery drain that couldn’t be found. not only does it disconnect the battery and stop the drain, it’s also a security system making the vehicle unstartable!
- 🚘【easy installation 】no modifications needed! step 1: connect the red wire to the positive pole of the battery. step 2: fix the battery clip to the negative pole of the battery. 12v battery disconnect switch allows you not to open the hood every time for turn on the power, just press the remote control key button to disconnect your car power system, saving you plenty of...
- 🚘【wide application】remote battery disconnect switch works well for car, truck, rv, travel trailer, camper, suv, atv, utv, marine, van, boat, agricultural vehicle trike auto off road jeep and other engine applications with a 12 volt battery.
SHOWview product -
Product Highlights
- ★ rating ★ - the 12v battery junction block rated 250a when work in 12v circuit, and the battery junction block can work with max 48v power.
- ★ 316 stainless steel material ★ - the stud of the terminal post is made of 316 stainless steel, which makes this 12v junction post have better corrosion resistance performance compared with 304 stainless steel made battery bus bar.
- ★ product ★ - a pair of single stud terminal 12v junction block, includes a positive power distribution block red and a negative power distribution block black.
- ★ 3/8" stud terminal ★ - the battery post is single 3/8" m10 stud terminal design, which makes the 12v bus bar terminal block be able to accept large size terminal connectors and wires.
- ★ application ★ - the heavy duty insulated junction post block aims to make the wiring of circuit become neat and tidy, prevent electric short circuit, suitable for automotive, car, truck, marine, boat, solar panel, etc.
SHOWview product -
Product Highlights
- 【superior quality】 - the battery switch is made of high quality abs plastic, durable made for safety use, rear cover insulates terminals against any short of circuits. compared with others, our battery disconnect switch is m10 tinned copper studs and nuts, which is safer and more reliable in electrical conductivity.
- 【wide application】 - this battery shut off switch is suitable for dc 12 - 48v system to isolate and secure the electrical system, can stand alone or be locked together with other switches. it is widely used for car, marine, boat, rv, camper, travel trailer, truck, atv, utv, battery banks and other electrical equipment's switch.
- 【on/off switch】 - this battery disconnect switch 12v features on/off 2 position; rating: 275a dc continuous (1hr), 455a dc intermittent (5 min), 1250a dc cranking (10 sec). stud size: 2x3/8" (10mm).
- 【safety protection】 - this waterproof battery switch 12v can disconnects the battery safely, protect batteries from excessive drain when vehicle or boat is not in use.
- 【package include】 - package includes 1* battery switch, 4 stainless steel mounting screws and caps to help fix the switch tightly. for any problems, please do not hesitate to write to us.
SHOWview product
Coupon copied
