10 Best
Auto Vacuum Hoses
-
Product Highlights- Suitable for use with standard 32mm (1 1/4in) or 35mm (1 3/8 in ) diameter vacuum cleaners, hand vacuum cleaner,car vent cleaner ,vent vac cleaner, mini vac cleaner. not for bissell vaccum,not for hoover vacuum cleaner ,not fit shark vacuum,doesn't fit dirt devil vacuum,not fit for dyson
- Keep your vacuum cleaner operating at peak performance! these vacuum cleaners are recommended that the replacement brush tools should be changed every 1-3 months.
- This mini dusty brush vacuum attachment with the adapter is suitable for eureka, royal, electrolux types of vacuum cleaners with 32mm (1.25 inches) outside diameter hose
- All in one kit - replacement attachment brush kit accessories, suitable for standard 32mm and 35 mm diameter size
- 1.25" (32mm) hose adapter adapter can connect your 1.25" (32mm)outside diameter vacuums hose or wand with our another 5pcs attachments perfectly for an all-around cleaning.
SHOWview product -
Product Highlights
- Broad operation temperature: -76f to 374f (-60c to 190c). 60 psi maximum pressure rating
- Material stability: handle extreme pressure; ultra flexible and excellent tensile strength
- Size: inner diameter 0.2 inch (5mm silicone rubber hose black); outer diameter 0.4 inch (10mm); length 6.5 feet (2 meter); wall thickness 3mm
- Reinforcement: made of high temperature premium grade silicone rubber
- Applicability: applies to general purpose air or water transportation in the engine bay
SHOWview product -
Product Highlights
- Kit also includes: spring clamp kit(22pcs), 30pcs zip tie and 6pcs plastic t-joiner
- Wide application: gauge vacuum hose, boost hose, radiator tank, etc
- 3 high performance silicone vacuum hoses : id 0.31" (8mm) x 3ft (1meter) + id 0.16" (4mm) x 6ft (2meter) + id 0.12" (3mm) x 10ft (3meter)
- Kit is universal fit to all vehicle makers and models
- Operation temperature : -76 to 374 f (-60 to 190 c),pressure rating : 60 psi
SHOWview product -
Product Highlights
- Quality material: our tubing hose is made of premium silicone, durable and high temperature resistant, possessing good plasticity and aging resistance. you can use it for a long term without any worry.
- Two-layers package: the vacuum hose is wrapped with a film, and the outside is packaged with high-quality pe bag, which can avoid the damage of product during transportation.
- Package content: you will receive a silicone vacuum tubing hose with the inner diameter of 3mm / 1/8inch, the outer diameter of 7mm / 7/25inch, the thickness of 2mm / 1/12inch and the enough length of 3m / 10ft. enough to satisfy your demands.
- Easy to use: the silicone vacuum tubing hose can be cut into suitable length easily according to your needs. the rest can be stored at the locker for the next use.
- Warm reminds: please check the size of our product carefully before buying. working temperature: -40°~180° (-40°f~356°f). working pressure: 0.3~0.9mpa. please note the maximum and minimum when using.
SHOWview product -
Product Highlights
- 【easy to use and store】: when it is time to replace the vacuum hose line, prepare the new silicone vacuum tube, remove the old one, and then install it in your vehicle. this silicone vacuum hose is 10 ft long and can be cut to the right size as needed, and it can be bent for easy storage. you can put it in the car when you don't need it.
- 【dimensions】: this silicone vacuum hose has a length of 10 feet, an inner diameter of 1/4" (6mm) and thickness of 3mm. the operating temperature is -76°f~428°f and the maximum pressure that can withstand is 130psi, and there are three colors such as black, red and blue for you to choose. it is long enough to meet your demand.
- 【high quality】: this silicone vacuum tubing hose is made of high quality silicone, it is strong and durable with good flexibility and plasticity. you can bend it according to your needs. this material also has the characteristics of corrosion resistance, can be used for a long time. it can resist high temperature, and works great at a temperature of -76°f~428°f.
- 【function】: this vacuum tube has a wall thickness of 3mm, which has the characteristics of high temperature, low temperature resistance and wear resistance. it is mainly used for air and liquid transport in engines, or to transfer lubricating oil. it has no noticeable odor and the emissions from the vulcanization process are harmless to humans. because of its environmen...
- 【feature】: silicone is a great replacement material. it will not deteriorate easily like other materials. when your old vacuum hoses are heat damaged and weathered, you can think about this product. although there's no problem with your vacuum hoses, you can buy it as a plan b, in case you need it in the future.
SHOWview product -
Product Highlights
- 【high-grade material】: the vacuum connector set is made of high quality nylon with heat resistance up to 240℃ (460℉), waterproof and more durable for long term use. what's more, the three barbs prevent leakage and make it more stable to ensure the good performance of the product.
- 【convenient packaging】: the product 12 sizes come in a very nice clear pp assortment box, each size of vacuum connector is separated into different grids, and there is a size information guide on the box, which makes it easy for you to find the size you need quickly, easy to carry and store.
- 【adequate quantity】: our vacuum connector set contains 113 connectors, providing you with 12 different sizes of connectors, both tee and straight, perfectly enough to meet your daily needs, you can also share this automotive hose connector with others. no need to buy more for a long time.
- 【usage】: our use and installation does not require the use of any tools, you just need to install the hose firmly on the barb and make it fit tightly. you can also use a hair dryer to soften the end of the hose before installation if desired. suitable for car repair or replacement, connecting hard pipes such as pe pipes, as well as drilling and inserting these vacuum fi...
- 【scope of use】: the vacuum fitting combo kit can be used in three places on your car, the tee fitting, the reducer connector, and the straight fitting. it is suitable for replacing vacuum hoses, water jet fittings, glass gaskets, wiper connector tubes, etc. you can also use it for cornering, repairing or extending the tail exit.
SHOWview product -
Product Highlights
- 7 piece shop vacuum car detailing kit contains 1 1/4 inch wet or dry vacuum accessories that are specifically designed to use a shop vacuum to clean your car, truck, or van.
- 1 1/4 inch horsehair bristles round brush is a shop vacuum attachment for cleaning air and heating vents, mini and vertical blinds
- The car vacuum attachment fits most(not all) vacuums with a standard 1 1/4 inch & 1 3/8 inch inlet opening or hose.not compatible with the dyson , does not fit mosoo,not fit shopvac.
- 1 1/4 inch flexible crevice tool is a shop vacuum attachment for reaching into slim, narrow areas in the car, furniture and appliances.
- 1 1/4 inch small utility nozzle with plastic brush, the brush can be removed, for floor and car mat cleaning
SHOWview product -
Product Highlights
- 💯 barbed hose tee connectors and hose reducer connectors with hose straight connectors -------- we have assembled three different connectors for vacuum hoses connection in one set for you to use：turn corners, patch and extend the tail outlet, this accessory is a three-section barb, more stable to prevent water leakage or spray off caused by excessive water pressure.
- 💯 high quality --------- all our products are made of high-quality nylon materials, new nylon plastics and excellent anti-aging formula, which have long service life, excellent anti-aging performance and durability. reminder: please pour the tube into the bottom of the barb to make it stable and not leaking or falling off.
- 💯 what you get ------- in this kit, you will get 113pcs vacuum connector assortment kit, including 3 parts, 37pcs hose tee connectors; 16pcs hose reducer connectors; 60pcs hose straight connectors. total 113pcs vacuum connector are classified in an organizer case for easy access to the right size and replacement.
- 💯 easy to use ------- stable and reliable, watertight. very simple to use. secure and easy installation without glue, tools, or clamps. simply push the tubing firmly over the barbs for a very tight fit that won't leak. if desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting.
- 💯 work well ------- this was a great value and has already helped you redo all the vacuum lines on your project. good quality. the specific size has been clearly written in the product picture, you can view the picture. its a better choice to your automotive general maintenance or replacement
SHOWview product -
Product Highlights
- Convenient design: with 12 common sizes in one assortment box, each size of vacuum connector is separated in different grids and there is also size information guidance on the box, total 113pcs vacuum connector are classified in an organizer case for easy access to the right size and replacement.
- Pay attention to： before installation you can also make the tubing end softer with blow dryer if needed. please push the hose to the bottom of barb for better stability.
- Vacuum connector: the vacuum hose connectors are made of upgraded nylon materials, which are more durable. reminder: please pour the tube into the bottom of the barb to make it stable and not leaking or falling off.
- Vacuum connector kit: we have assembled three different connectors for vacuum hoses connection in one set for you to use：turn corners, patch and extend the tail outlet, this accessory is a three-section barb, more stable to prevent water leakage or spray off caused by excessive water pressure.very simple to use. secure and easy installation without glue, tools, or clamp...
- Vacuum connector assortment : the barbed type vacuum connector assortment kit has totally 113 pcs including 37 pcs hose tee connectors, 16 pcs hose reducer connectors, 60 pcs hose straight connectors, the quantity is enough for you to use
SHOWview product -
Product Highlights
- Kit includes:1 pieces of 3m(10ft) silicone vacuum hose : id 3mm id x 9mm od + 6 x stainless worm gear hose clamps
- High temperature silicone tubing. temperature: -20-200¡æ. it can work under mashing, boil temps, boiling wort, hot water, etc. uv resistant, gases and moisture resistant
- Made of premium silicone material to ensure strength and durability
- It applies to general purpose air or water transportation in the engine bay
- Broad operation temperature : -76f to 374f (-60c to 190c). 60 psi maximum pressure rating
SHOWview product
Coupon copied
