10 Best
Go Cart Kits
-
Product Highlights- Includes: 300mm steering wheel steel kit 320mm gear rack pinion adjustable shaft set.
- Made of: premium metal material with hard black plastic around the outside.
- Fitment vehicle: replacement for 110cc go kart steering wheel assembly set.
- Size: the diameter for the steering wheel 11.8 / 300mm; mounting holes centre to centre distace 1.42 / 36mm; the end to end length range after the tie rod connected with the steering rack is from 33 - 35 / 840mm - 890mm.
- Easy to install: comes with mounting tie rod, steering rack and adjustable shaft to convenient the installation.
SHOWview product -
Product Highlights
- 【size】outside diameter: aprox. 300mm / 11.81inch;gear pack pinion:32cm/12.59inch;center hole: 18mm/0.71inch;three mounting holes diameter: 7mm / 0.28inch;mounting holes centre to centre distace: 36mm / 1.42inch.
- 【easy to install】 with 3 mounting holes in the centre of steering wheel, the kits is easy to install,convenient and save your time.
- 【high quality material】the 110cc go kart steering wheel is made of premium metal material with hard black plastic around the outside,which durable and wear-resistant,lasting using time.
- 【practical assembly】the steering wheel assembly comes with 30cm steering wheel,32cm gear rack pinion and adjustable shaft tie rod.
- 【wide application】smooth surface and ergonomic design brings comfortable hand feeling,perfect replacement steering wheel for the old wheel on your atv or go-kart buggy quad,such as 110cc 125cc 140cc 150cc,ect.
SHOWview product -
Product Highlights
- Fits 150cc - 250cc engines.
- Package including: 2pcs x tie rods (with 2 mounting screws), 1pcs x steering rack, 1pcs x adjustable shaft, 3pcs x ties and other must kits (including all items as the pictures show).
- 17'' gear rack pinion u joint tie rod knuckle assy for chinese 110cc 125cc 140cc 150cc go kart buggy golf parts.
- 390mm /15.4'' rack, 435mm /17.1'' adjustable shaft.
- Please check pictures and specifications for compatibility. quality assurance, unconditional lifetime guarantee, so you can purchase now with confidence.
SHOWview product -
Product Highlights
- This high quality110cc 125cc 140cc 150cc go kart atv utv steering wheel assembly set includes tie rod, steering rack and adjustable shaft and other must kits.
- Metal with hard black plastic around the outside.
- Brand new 12'' steering wheel assembly 17'' gear rack pinion u joint tie rod knuckle assy hor chinese 110cc 125cc 140cc 150cc go kart quad parts, fits150cc - 250cc engines.
- Size: overall diameter is 300mm / 11.81''. center hole is 18mm / 0.71''. 390mm /15.4'' rack, 435mm /17.1'' adjustable shaft.
- Please check pictures and specifications for compatibility. quality assurance, unconditional lifetime guarantee, so you can purchase now with confidence.
SHOWview product -
Product Highlights
- Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
- Unit replaces:comet 218353a, 219552a, 219456a, 217610a, and 203814a tav2 30-75
- Torque converter for predator 212 - replace manco comet tav2;recommended engine: within 8.0 hp 212cc engines, 3/4"shaft with flat key
- 12t sprocket for #35 chain and 10t sprocket for 41/40 chain drive clutch bore 3/4"(19mm)
- Complete torque converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, atv, motorcycles, and waterski winches
SHOWview product -
Product Highlights
- Multi-pack - we offer this hub as a pair.
- Material - made of tough durable steel.
- Specs - each 4" x 4" go-kart live axle hub comes with a 2-3/4" hub length, 1" axle diameter with a 3/4" step-down, and uses a 1/4" keyway slot. includes four lug nuts.
- Use - commonly used on gokarts, quads, atvs, and trikes that use 8" wheels.
- Risk free guarantee - we honor amazon's return policy.
SHOWview product -
Product Highlights
- Single - we offer this hub as a single quantity
- Durable - made of tough durable steel
- Specs - this is a 4" x 4" go-kart live axle hub with a 2-3/4" hub length, 1" axle diameter with a 3/4" step-down, and uses a 1/4" keyway slot. includes four lug nuts
- Use - commonly used on gokarts, quads, atvs, and trikes that use 8" wheels
- Risk free guarantee - we honor amazon's return policy
SHOWview product -
Product Highlights
- 【really wakes up the bike】 this 3/4" torque converter is a direct replacement kit for the most popular comet tav2 go-kart torque-converter 30 series. it fits all engines with a 3/4" straight crankshaft. diy modifications to your mini bike require some mechanical ability. i'm sure you can do it!
- 【a huge improvement over the old centrifugal clutch】this clutch will help you get more power out of your small engine by reducing engine load. a torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. on a lighter buggy or drift cart or mini-bike this will smoke your old centrifugal clutch.
- 【for your convenience this kit comes with】1 x 3/4" driver pulley;1 x 5/8" driver pulley; 1 x plastic assy cover;1 x aluminum mounting plate;1 x drive belt; 1 x 10 tooth sprocket for #40/41/420 chain; 1 x 12 tooth sprocket for #35 chain(chain not included); 1 x full mounting hardware.
- 【torque converter diy modifications compatible】diy modifications fits for go karts and mini bikes and drift carts, such as bt200x, cx100, ct200u ex, massimo baja 200, doodlebug db30, mini-bike, rt200, manco 485, baja warrior minibike, baja heat mini bike, non live axle kart and etc. suitable for hisun196 engine, predator 224 engine, predator 212cc engine, mini bike 224c...
- 【bring your off-road machine to life】this tav2 30 series go kart clutch kit fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. it will work with small engines producing 2-8hp. 30 series asymmetrical design.
- 【30 series toruqe converter belt for 6" driven】 length: 70.5cm / 27.76", outside circumference: 27 23/64" , width is 3/4".（1.9cm / 0.75"). center to center of driver and driven: 6-15/16 to 7".
SHOWview product -
Product Highlights
- Promised braking & cooling: this hydraulic brake kit features heavy-duty stopping power for everyday drivability. drilled & slotted rotors improve heat dissipation during extreme conditions.
- Complete accessories: the go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. it comes ready to install, pressurized with brake fluid. do not worry about bleeding the brakes.
- High adaptability: this go-kart hydraulic brake kit is compatible with hammerhead and trailmaster karts and other 150cc go-karts. it provides superior performance demanded by off-road enthusiasts.
- Quality material: the master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with dot3 brake fluid. the brake discs are constructed from high-quality steel, durable and lasting for daily use.
- Key parameters: bolt spacing of master cylinder brake pedal: 0.787" / 20 mm; master cylinder mounting hole: 2.36" / 60 mm center to center. three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm.
SHOWview product -
Product Highlights
- The axle made by high strength alloy, can support more than 500lbs.
- Axle is symmetric, so the brake and sprocket can be moved to a different location.
- Axle overall length 32 inch, 1.2 inch diameter.
- Perfect for vertical or horizontal engines with any displacement and electric motors.
- Replacement for diy go kart, atv, quad, trikes, golf carts.
SHOWview product
Coupon copied
