10 Best
Accessory Power Car Jacks
-
Product Highlights- Product features: this scissor jack adapter makes it easier to lift your car. it helps you easily raise, lower and level your scissor jack faster and easier than ever before, reducing the time and effort spent raising or lowering your scissor jack.
- Scope of application: this jack adapter is high quality, sturdy and durable, suitable for most scissor jacks on the market. if you plan to use an impact wrench with this adapter, keep the speed low to minimize vibration.
- High quality material: the scissor jack jack adapter is made of high quality chrome vanadium steel material. this product is very strong and durable, and has a long service life, so you don't have to worry about breaking it during use.
- Easy to use: install this scissor jack adapter and you can use it with 1/2 inch drive or impact wrench or standard drive socket, making extending and retracting the scissor jack very quick and easy.
- Product contents: including 1 piece scissor jack adapter, size: 5cm x 2cm/1.96" x 0.78". so please measure the size of the jack before ordering, in case this product is not suitable for your jack.
SHOWview product -
Product Highlights
- 【superior material】: this product is made of sturdy and durable chrome vanadium steel material. it is hard and has excellent compression and impact resistance so that it can be used for a long time. it is wear-resistant, rustproof and corrosion-resistant, and can withstand various working environments.
- 【widely applicable】: this scissor jack adapter measures 1.97×0.79 inches, compact and easy to store, which can be put in the trunk for emergency. it has a 1/2-inch inside diameter and 13/16-inch outside diameter of the socket and fits most ring or double eyelet scissor jacks on the market.
- 【practical function】: if you are struggling to lift your car with a jack, this product can help you make raising, lowering or leveling a scissor jack faster and easier. it improves the efficiency of jack use, saves your time and energy, and allows you to easily replace or repair leaky car tires.
- 【method of use】: first, slide the drill jack adapter onto the shear jack. second, insert the bolts and washers into the pre-drilled holes in the adapter and jack. third, insert the crush-resistant washer, bolt washer and nut into the other side. finally, tighten the bolts that secure the impact jack adapter to the shear jack.
- 【safety tips】: when using an impact wrench on this adapter, keep speeds low to minimize vibration. always hold the power tool slowly to prevent nuts and bolts from flying out. always make sure you are on a level surface when lifting your vehicle. do not lie under the vehicle while it is being lifted.
SHOWview product -
Product Highlights
- Convenience: rugged and versatile, the jack adapters allow you to raise, lower and level your scissor jack faster and easier than ever, making repairs more efficient. the jack adapter is small and easy to carry, and can be stored directly in the car repair tool box. it's easily available when you need it.
- Simple use: first, slide the drill jack adapter onto your scissor jack. then, insert the bolts and washers into the pre-drilled holes on the adapter and jack. if you don't have a 1/2-inch hex or impact wrench, a jack adapter can help you insert a standard drill bit easily.
- Metal material: the jack adapter is made of metal material, which has high hardness and is not easily deformed and can adapt to long-term use. the jack adapters provide excellent performance in wet environments. there is no need to worry about the quality of the drill bit adapter during use.
- Product parameters: the size of the jack adapter is 0.78in x 1.96in, suitable for 1/2-inch driver/impact drill/ratchet or standard driver slot. after purchase, you will receive 1 x jack adapter, which is enough for daily use. the jack adapter will fit most ring or double eyelet scissor jacks on the market.
- Wide applications: after the jack adapter is manufactured, it undergoes strict quality testing to ensure that the jack adapter can be used for a long time. the jack adapter is wear-resistant and has excellent load-bearing capacity, making it the perfect car repair accessory.
SHOWview product -
Product Highlights
- Function: this rubber support block can alleviate the impact force caused by the direct contact between the jack and the bottom of the car body, effectively disperse the load, avoid extrusion and deformation of the chassis structure, avoid damage to the car body when using the jack. protect the car body, thus extending the life of the vehicle.
- Product parameters: you will receive 1 x black round jack rubber pad. the product appearance diameter is 4.92", the thickness is 1.02" (26mm), and the cross groove width is 0.39" (10mm). suitable for most car chassis jacks point rail protector.
- Rubber material: this car jack support block is made of rubber material, which has excellent flexibility and hardness, hard enough to support the chassis and soft enough to avoid chassis damage. will not damage the vehicle's metal accessories. adopting cnc numerical control processing, it is wear-resistant, durable and anti-aging, and has a long service life.
- Cross recess design: the cross-recessed design can be aligned with the side welds to avoid bending of the frame longitudinal beam when the jack is working, enhance friction, make it more stable and firm, and will not slip off. provide more buffering and compression resistance.
- Perfect accessory: this rubber pad is a perfect accessory for use as a jack, which can better protect the car body. it is an essential tool for car owners and maintenance engineers. if you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
SHOWview product -
Product Highlights
- [scope of application]: this scissor jack drill adapter tool has a wide range of applications and can suitable for 1/2 inch drive impact wrench or 13/16 inch lug wrench. please carefully check whether the details of the product are consistent with your needs before purchase to avoid non-conformity after purchase.
- [easy to use] : using this drill jack adapter is very simple. you simply mount it on the scissors jack, then insert the bolts and washers through the adapter and pre-drilled holes in the jack. next, insert the compression washer, bolt washer and nut on the other side, and finally secure the impact jack adapter to the bolt on the scissors jack.
- [excellent material]: this scissor jack adapter is made of chrome-vanadium steel with high strength and hardness, which can resist wear and deformation well. and corrosion resistance, even in a humid environment for a long time use will not rust. it has good thermal stability and can also maintain stability in high temperature environment.
- [increase efficiency]: this scissor jack adapter drill adapter is rugged, versatile, and easier to use, which can greatly improve your productivity. its unique design makes it easy to remove flat tires without having to spend a lot of time and effort using traditional scissors jacks, effectively reducing the time and effort required to use scissors jacks. if you need an...
- [package content]: the package includes 1 x sturdy power drill socket scissor jack connector.
SHOWview product -
Product Highlights
- Can be used with both standard sockets & hella / din type sockets, simply remove the red end cap via a twist action to use with the smaller type hella / din socket
- Fitted with 8 amp replaceable fuse
- Package content: 3* car cigarette lighter plug
- Suitable for 6v, 12v, & 24v application
- Wires connect via screw terminals for hassle free fitting
SHOWview product -
Product Highlights
- Real quality - due to our special rubber compound, you will enjoy our product for years. choose premium protection.
- Protection & safety - no compromise in the protection of your car! your car is protected against slipping. the indentation on the underside of the rubber buffer ensures a stable hold on the jack plate.
- Easy to use - the power pad is perfectly suitable for various car bodies and jacks (e.g. unitec, michelin etc.) the application is quick, uncomplicated, slip-proof and accurate!
- Product properties - material: very robust nr/sbr rubber (80 shore a) // dimensions: diameter top = 65mm , diameter bottom (attachment for jack) = 38mm, // suitable for cars up to 3.5t. // important: before buying, check the dimensions of your car and jack and compare them with the dimensions in picture 4.
- 10 years warranty - we are 100% convinced of our product! that is why we offer you a ten-year guarantee. our customer service will also be happy to advise you. convince yourself!
SHOWview product -
Product Highlights
- 【notch design】: it has a diameter of 2.95 inches and a height of 1.38 inches. it has a notch width of 0.39 inches and a notch height of 0.59 inches. the grooves are designed to increase the contact surface and grip, so it can fit better and ensure a secure and non-slip connection for better performance.
- 【usage & package】: this product is very easy to use, just install it to the top of the jack stand. it can serve your car repair work immediately. the package contains two jack rubber pads, which are enough for your use and replacement needs, and you can also share it with your family and friends.
- 【main function】: jack pads are located on top of the jacks. they provide protection and cushioning for the sensitive areas of the vehicle itself as well as the jacks that do heavy lifting when lifting your car. with them, there will be no more extrusion weld damage, paint scratches or metal damage, making your vehicle maintenance more enjoyable.
- 【good material】: this heavy duty jack pad is made of high quality rubber material. it can withstand weights of up to three to four tons, and is not easy to break or deform, providing more cushioning and pressure resistance. it is very wear-resistant and corrosion-resistant, and can be used for a long time.
- 【wide application】: the jack pad adapter fits most jacks and vehicles and works well with jack stands, and its universal size allows them to fit a variety of needs. it is a must-have accessory for automotive enthusiasts, mechanics, and repair stores, and is helpful for automotive maintenance.
SHOWview product -
Product Highlights
- It can be used for 12v/24v electronic equipment or vehicle device charging.just plug the 5.5mm x 2.5mm 12v dc male cigarette lighter into the ups backup battery, and connect the cigarette lighter female socket to the cigarette lighter male plug on the powered device.
- Compatible with many accessory plugs for most 12v~24v standard cigarette lighters, such as car refrigerators, car cleaners, air compressors, led lighters, computer telescopes, heating cups, car navigation systems, etc.
- The yacsejao dc rotary cigarette lighter female power cord is used to plug in a car charger, ups backup battery and a portable generator to power electronic or in-vehicle devices, keeping you powered on the go.
- It is lightweight and easy to carry. the pvc jacket protects the inner conductor and provides flexibility to the cord for extended service life.
- Package includes: female cigarette socket to male dc 5.5mm x 2.5mm. current: 0-10a. power: ≤150w
SHOWview product -
Product Highlights
- ⭐ excellent materials: the shell of the outlet socket is made of premium metal, with a built-in elastic ceramic core, which has excellent heat resistance and flame retardancy. its two pins can quickly introduce enough current. it is safer and more convenient to use. the top of the lighter socket is equipped with a press on cover to prevent water stains and dust from ent...
- ⭐ wiring method: during installation, be careful not to connect the cables incorrectly. the gold pin at the bottom of the 12v cigarette lighter socket is the positive pole, and the silver pin is the negative pole. the power supply position can be selected from a fuse box, cigarette lighter, ignition switch, etc. a 3.3 feet extension cable is enough for you to complete t...
- ⭐ buyer's guide: our cigarette lighter socket has a top diameter of 30mm/1.18inch and a bottom diameter of 20mm/0.79inch, with an overall height of 63mm/2.48inch. it is suitable for cigarette lighter holes with an inner diameter of 21mm/0.83inch. before purchasing, please carefully confirm whether your car cigarette lighter plug supports cigarette lighting.
- ⭐ widely applicable: the input voltage of the lighter power outlet socket is 12v-24v, and the input power is 120w-250w. it is suitable for the vast majority of 12v cars, off-road vehicles, vans, suvs, motorcycles, and 24v trucks on the market. you can use this lighter socket to connect audio, car vacuum cleaner, tire inflation pump, and other devices.
- ⭐ perfect service: we insist on providing the best car accessories and services for our 40 million customers worldwide. each of our cigarette lighter socket is carefully tested and inspected before delivery. if you have any questions, our customer service staff will be happy to help you.
SHOWview product
Coupon copied
