10 best5 Channel Ampof June 2025
112M consumers helped this year.
1

Pioneer GM-DX975 - Powerhouse Amplifier with 2,000 Watts, Class-D Technology, 5-Channel, Variable Low-Pass Filter, Compact Design, and Remote Bass Boost Control
Pioneer

10.0
2

Rockville DBM50 4000 Watt/980w CEA RMS 5 Channel Marine/Boat Amplifier Amp+Mic
Rockville

10.0
3

Rockford Fosgate M2-750X5 Marine 750-Watt 5-Channel Amplifier
Rockford Fosgate

9.9
4

Rockford Fosgate M5-1500X5 IPX6 Element Ready 1500-Watt 5-Channel Marine Amplifier with Dynamic Power
Rockford Fosgate

9.7
5

5 CH AMP 50W RMS X4 + 300W
KENWOOD

9.6
Other
6

Alpine X-A90V X-Series 5-Channel Power Density Amplifier
Alpine

9.4
7

BOSS AUDIO PV3700 Phantom 3700-Watt Full Range, Class A/B 2-8 Ohm Stable 5 Channel Amplifier with Remote Subwoofer Level Control
Boss Audio

9.2
16% off
8

Kenwood XR901-5 5 CHANNEL REF SERIES AMP
KENWOOD

9.0
9

Rockford Fosgate R2-750X5 Prime 750 Watt Full Range 5-Channel Amplifier, Black
Rockford Fosgate

8.8
10

DS18 G4000.5D GEN-X Full-Range Class D 5-Channel Amplifier 4000 Watts Max Power 2/4 Ohm Stable, Bridgeable, High/Low Pass Filter - BASS Knob Included - Compact Amp for Speakers in Car Audio System
DS18

8.5
A Guide to Selecting the Best 5 Channel Amp
Choosing a 5-channel amplifier is a great way to power an entire car audio system with a single device. These amps are designed to run four speakers and a subwoofer, making them a popular choice for those who want a clean, organized setup without multiple amplifiers. When picking the right 5-channel amp, it's important to understand the key specifications and how they relate to your needs and the rest of your audio system. By focusing on the main specs, you can ensure your amp will deliver the sound quality and power you want, while matching your speakers and subwoofer for the best performance.
Power Output (RMS Wattage)
Power output, often listed as RMS wattage per channel, tells you how much continuous power the amp can deliver to each speaker and the subwoofer. This is important because you want your amp to provide enough power for your speakers and sub without causing distortion or damage. Power output is usually divided into two segments: the four main channels (for speakers) and the fifth channel (for the subwoofer). For the main channels, values typically range from 30 to 100 watts RMS per channel, while the subwoofer channel can range from 150 to 500 watts RMS or more. If you have factory or entry-level speakers, lower power is usually sufficient, but if you have upgraded or high-performance speakers and a powerful sub, look for higher RMS ratings to match. Always try to match the amp’s output to your speakers’ and subwoofer’s RMS ratings for the best results.
Impedance Compatibility
Impedance, measured in ohms, refers to the resistance your speakers and subwoofer present to the amplifier. Most car speakers are 4 ohms, but some are 2 ohms. The amp needs to be compatible with the impedance of your speakers and subwoofer to work safely and efficiently. Many 5-channel amps can handle both 2-ohm and 4-ohm loads, but you should check the specs to be sure. If you plan to use lower-impedance speakers or wire multiple speakers together, make sure the amp can handle the lower load without overheating or shutting down. Matching impedance ensures you get the right power output and avoid damaging your equipment.
Signal-to-Noise Ratio (SNR)
The signal-to-noise ratio (SNR) measures how much background noise the amp produces compared to the audio signal. A higher SNR means cleaner, clearer sound with less hiss or interference. SNR is usually measured in decibels (dB), and values above 80 dB are generally considered good, while values above 100 dB are excellent. If you’re an audiophile or want the best sound quality, look for a higher SNR. For everyday listening, most modern amps provide a satisfactory SNR, but it’s still worth checking if you’re sensitive to noise.
Crossover Controls
Crossover controls allow you to adjust which frequencies are sent to your speakers and subwoofer. This is important because it helps prevent distortion and ensures each speaker only plays the frequencies it’s designed for. Most 5-channel amps have built-in high-pass filters for the main channels (to block bass from small speakers) and low-pass filters for the subwoofer channel (to send only bass to the sub). Some amps offer more advanced crossover options, letting you fine-tune the sound. If you want more control over your system’s sound, look for amps with flexible crossover settings. If you prefer a simple setup, basic crossovers will usually suffice.
Size and Installation Flexibility
The physical size of the amp matters because it needs to fit in your vehicle, often under a seat or in the trunk. Some 5-channel amps are compact and easier to install in tight spaces, while others are larger and may require more planning. If you have limited space, look for a compact model. Also, check the amp’s wiring and mounting options to ensure it will work with your vehicle and installation preferences. Choosing the right size and installation features will make the setup process smoother and help you avoid headaches down the road.
Input and Output Options
Input and output options determine how the amp connects to your head unit (stereo) and speakers. Most amps offer RCA inputs for aftermarket stereos, and some also have speaker-level inputs for factory systems. If you’re keeping your factory stereo, make sure the amp supports speaker-level inputs. Output terminals should be sturdy and easy to use, especially if you plan to upgrade or change your system in the future. Picking the right input and output options ensures compatibility with your current and future audio setup.

Best Reviews Guide Newsletter
Get exclusive articles, recommendations, shopping tips, and sales alerts
Sign up for our newsletter to receive weekly recommendations about seasonal and trendy products
Thank you for subscribing!
By submitting your email address you agree to our Terms and Conditions and Privacy Policy